IMS.28 Eco MAX LN

Product catalog summary

Specifications:
The IMS.28 Eco MAX LN planetary gear system is available in 1-stage, 2-stage, and 3-stage configurations. The permissible output torque is 0.4 Nm, 1.0 Nm, and 2.0 Nm respectively. Gearbox efficiency is approximately 0.75 for 1-stage, 0.70 for 2-stage, and 0.65 for 3-stage. The maximum backlash is 1.90° for 1-stage, 1.95° for 2-stage, and 2.00° for 3-stage. The recommended initial speed for all stages is 3,000 U/min.

Design and Features:
The gear system features low noise due to helical gearing in the first stage and is designed for economic solutions with a modular system and optimized material mix. It is suitable for temperature ranges from -15°C to +65°C. The plastic planetary gear has an outer diameter of 28 mm and is designed for improved performance with less installation space.

Reduction Ratios:
The gear system offers various reduction ratios, with examples including 4:1, 14:1, and 51:1 for 1-stage, 2-stage, and 3-stage respectively. Not all reduction ratios are available ex-stock.

Load Capacities:
The maximum radial load is 15 N for 1-stage, 30 N for 2-stage, and 45 N for 3-stage. The maximum axial load is 5 N for 1-stage, 10 N for 2-stage, and 15 N for 3-stage. The maximum permissible fitting pressure is 150 N for all stages.

Dimensions and Weight:
The approximate weight is 100 g for 1-stage, 115 g for 2-stage, and 130 g for 3-stage. Gearbox lengths are 25 mm, 34.57 mm, and 44.07 mm for 1-stage, 2-stage, and 3-stage respectively, with slight variations possible.

Additional Information:
All figures are approximate and subject to change. For more detailed information, contact IMS Gear directly or visit their website.

Catalog excerpts

Planetary gear IMS.28 Eco MAX LN Our plastic planetary gear from the Eco Series with outer diameter 28 mm combines efficiency with economy. In the welded MAX version it stands for improved performance with less installation space; furthermore, it meets the increased demands on low noise performance. Low Noise (LN) Due to the use of helical gearing in the first stage particularly low noise. Economy Modular system, optimized material mix: For economic solutions even with small quantities. Temperature Also ideally suited for demanding temperature ranges from -15° to +65°C. Perm. output torque TAB (Appl. factor CB = 1.0) Gearbox efficiency, approx. Recommended initial speed

Open the catalog to page 1

IMS GEARCurrent reduction ratios i roundedEco Eco Eco 1-stage * not all reduction ratios available ex-stock Output side with sintered metal bearing 1-stage 2-stage 3-stage a Shortest possible gear length, can only be realized if motor design directly matches our ring gear. b The calculatory minimum length of the gear is indicated on condition of an optimum connection of flange and motor. Please contact us directly for your concrete project. IMS Gear SE & Co. KGaA | 07/2022 | Subject to change. All figures are approximate values. Variations are possible and may arise for example due to non-standardized...

Open the catalog to page 2

IMS.28 Eco MAX LN

IMS.28 Eco MAX LN

Catalog excerpts

All IMS Gear catalogs and technical brochures