IMS.22 Pro MAX

Product catalog summary

Overview: The IMS.22 Pro MAX is a planetary gear system designed for robust performance across various applications. It is part of the Pro Series, featuring an outer diameter of 22 mm and is available in 1-stage, 2-stage, and 3-stage configurations.

Specifications:

Permissible Output Torque: 0.6 Nm (1-stage), 0.7 Nm (2-stage), 0.8 Nm (3-stage)
Gearbox Efficiency: Approximately 0.90 (1-stage), 0.80 (2-stage), 0.70 (3-stage)
Max Backlash: 1.50° (1-stage), 2.00° (2-stage), 2.50° (3-stage)
Recommended Initial Speed: 6,000 U/min for all stages
Temperature Range: -30°C to +120°C

Performance: The planetary gear is described as powerful, long-lived, and robust, suitable for demanding temperature ranges.

Mechanical Load Capacities:

Max Radial Load: 25 N (1-stage), 35 N (2-stage), 50 N (3-stage)
Max Axial Load: 10 N (1-stage), 15 N (2-stage and 3-stage)
Max Permissible Fitting Pressure: 80 N for all stages

Dimensions and Weight:

Weight: Approximately 43 g (1-stage), 59 g (2-stage), 75 g (3-stage)
Gearbox Length: Varies by stage with specific tolerances

Reduction Ratios: The document lists various reduction ratios for each stage, indicating flexibility in application.

Additional Notes: All figures are approximate and subject to change. For precise project requirements, direct contact with the company is recommended.

Catalog excerpts

IMS GEAR Planetary gear Our planetary gear from the Pro Series with outer diameter 22 mm combines performance with robustness. In the radially screwed MAX version it stands for improved performance with less installation space. Powerful, long-lived and robust - the planetary gear convinces in a multitude of applications.

Open the catalog to page 1

IMS GEARCurrent reduction ratios i roundedPro MAX Pro MAX Pro MAX 1-stage Output side with ball bearing (2Z) 1-stage 2-stage 3-stage a Shortest possible gear length, can only be realized if motor design directly matches our ring gear. b The calculatory minimum length of the gear is indicated on condition of an optimum connection of flange and motor. Please contact us directly for your concrete project. IMS Gear SE & Co. KGaA | 07/2022 | Subject to change. All figures are approximate values. Variations are possible and may arise for example due to non-standardized inspection and measurement methods....

Open the catalog to page 2

IMS.22 Pro MAX

IMS.22 Pro MAX

Catalog excerpts

All IMS Gear catalogs and technical brochures