IMS.22 Eco MAX

Product catalog summary

Overview
The IMS.22 Eco MAX is a plastic planetary gear from the Eco Series by IMS Gear, designed to combine efficiency with economy. It features a compact design with improved performance, suitable for small installation spaces.

Specifications

Permissible Output Torque: 0.2 Nm (1-stage), 0.4 Nm (2-stage), 0.6 Nm (3-stage)
Gearbox Efficiency: Approximately 0.80 (1-stage), 0.75 (2-stage), 0.70 (3-stage)
Max Backlash: 1.50° (1-stage), 2.00° (2-stage), 2.50° (3-stage)
Recommended Initial Speed: 6,000 U/min for all stages

Economy
The gear system is modular with an optimized material mix, providing economic solutions even in small quantities.

Temperature Range
Suitable for demanding temperature ranges from -15°C to +65°C.

Mechanical Properties

Max Load, Radial: 15 N (1-stage), 30 N (2-stage), 45 N (3-stage)
Max Load, Axial: 30 N for all stages
Max Permissible Fitting Pressure: 150 N for all stages
Weight: Approximately 33 g (1-stage), 42 g (2-stage), 50 g (3-stage)
Gearbox Length: Varies by stage with specific measurements provided

Reduction Ratios
The document lists various reduction ratios for each stage, with approximate values provided.

Additional Information
All figures are approximate and subject to variations due to non-standardized inspection and measurement methods. For more detailed information or specific project inquiries, contacting IMS Gear directly is recommended. The company reserves the right to make technical modifications.

Catalog excerpts

IMS GEAR Planetary gear Our plastic planetary gear from the Eco Series with outer diameter 22 mm combines efficiency with economy. In the radially screwed or welded MAX version it stands for improved performance with small installation space. Economy Modular system, optimized material mix: For economic solutions even in small quantities.

Open the catalog to page 1

IMS GEARCurrent reduction ratios i roundedEco MAX Eco MAX Eco MAX 1-stage Output side with sintered metal bearing 1-stage 2-stage 3-stage a Shortest possible gear length, can only be realized if motor design directly matches our ring gear. b The calculatory minimum length of the gear is indicated on condition of an optimum connection of flange and motor. Please contact us directly for your concrete project. IMS Gear SE & Co. KGaA | 07/2022 | Subject to change. All figures are approximate values. Variations are possible and may arise for example due to non-standardized inspection and measurement...

Open the catalog to page 2

IMS.22 Eco MAX

IMS.22 Eco MAX

Catalog excerpts

All IMS Gear catalogs and technical brochures