IMS.120 Pro

Product catalog summary

Overview: The IMS.120 Pro is a planetary gear system designed for robustness and performance, suitable for a wide range of applications. It features an outer diameter of 120 mm and is available in 1-stage, 2-stage, and 3-stage configurations.

Specifications:

Output Torque: 1-stage: 50.0 Nm, 2-stage: 150.0 Nm, 3-stage: 300.0 Nm
Gearbox Efficiency: 1-stage: 0.80, 2-stage: 0.75, 3-stage: 0.70
Max Backlash: 1-stage: 1.00° DEG, 2-stage: 1.50° DEG, 3-stage: 2.00° DEG
Recommended Initial Speed: 3,000 U/min for all stages
Temperature Range: -30°C to +120°C

Mechanical Properties:

Max Radial Load: 1-stage: 600 N, 2-stage: 900 N, 3-stage: 1,500 N
Max Axial Load: 1-stage: 120 N, 2-stage: 180 N, 3-stage: 300 N
Max Permissible Fitting Pressure: 2,500 N for all stages
Weight with Motor Flange C105: 1-stage: 5.6 kg, 2-stage: 8.0 kg, 3-stage: 10.4 kg

Dimensions:

Gearbox Length: 1-stage: 86.3 ± 0.5 mm, 2-stage: 120.45 ± 0.5 mm, 3-stage: 154.6 ± 0.5 mm
Calculatory Minimum Length: 1-stage: 109.2 ± 0.6 mm, 2-stage: 143.4 ± 0.6 mm, 3-stage: 177.5 ± 0.6 mm

Reduction Ratios: The document lists various reduction ratios for each stage, with examples such as 4:1 (3.71) for 1-stage and 308:1 (307.55) for 3-stage.

Additional Notes: All figures are approximate and subject to change. Variations may occur due to non-standardized inspection and measurement methods. For detailed information, direct contact with the company is recommended.

Catalog excerpts

IMS GEAR Planetary gear Our planetary gear from the Pro Series with outer diameter 120 mm combines performance with robustness. Performance Powerful, long-lived and robust - the planetary gear convinces in a multitude of applications.

Open the catalog to page 1

IMS GEARCurrent reduction ratios i roundedPro LN Pro LN Pro LN 1-stage Output side with ball bearing (2RS) 1-stage 2-stage 3-stage a Shortest possible gear length, can only be realized if motor design directly matches our ring gear. b The calculatory minimum length of the gear is indicated on condition of an optimum connection of flange and motor. Please contact us directly for your concrete project. IMS Gear SE & Co. KGaA | 07/2022 | Subject to change. All figures are approximate values. Variations are possible and may arise for example due to non-standardized inspection and measurement methods....

Open the catalog to page 2

IMS.120 Pro

IMS.120 Pro

Catalog excerpts

All IMS Gear catalogs and technical brochures