Controller Software ACCESS PORTAL LITE Tailored for monitoring and controlling residential and small and medium commercial sites, Access Portal (AP) Lite is the entry-level offering for Impro Technologies 3rd Generation “Access Portal” range of access control products. Up to a maximum of 8 doors with full, anti-pass back (16 readers) are supported. AP Lite is flexible, allowing for easy re-configuring, and the addition of further hardware. The feature-rich embedded web application may be made securely accessible via any IPenabled, HTML5-compatible browser. This means that the system is easily accessible .via tablet, or PC, and certain mobile Phones (to be announced). Part of the standard firmware in Impro (CCM) Cluster Controller Modules, AP Lite runs when the CCM is configured for “AP Lite mode” (via quick and easy DIP Switch settings). AP Lite controls and monitors the actions of associated Access Portal Hardware – the wonderfully versatile black ABS cluster modules, or their IPS installation equivalents, as well as legacy iTT/iTRT/RS485 units, together with their Readers, Keypads, and Strike and Mag Locks. Feature Outline: • • • • • • • • • • • • Auto ID of the connected hardware Flexible Reader to Door Allocation Tag Holder Management (Including batches of Tag Holders) Up to 1 000 Tag Holders Up to 3 tags per tag holder Access groups Holidays Reason codes UDP output to user-defined recipient Lock down Emergency Unlock Report generation Product specification CATALOGUE

Key Features Date and time A Real Time Clock internal to the Cluster Controller Module is synchronised with the system time of the device whose browser is running the AP LITE Web Application. Daylight saving parameters include Start and End date, as well as the required time shift. Auto ID The Cluster Controller Module scans for all connected hardware and builds a list of all the fixed addresses of all Readers in the system. Reason Codes Where employees may need to supply a reason for passing through certain doors, up to 10 reason codes (and their names) can be defined. IDP Output The UDP Output...

Reports • Reports are generated and displayed on-screen • Reports may be Exported and Downloaded as CVS files, suitable for viewing and editing with a Spread Sheet Application. • There are Four Report Categories: Access Hours Worked Report provides access data for the selected Tag Holder over a specified date range. Report displays all the status transactions from Controllers and Terminals on a selected date. Report provides a list of Tags added, edited or deleted over a specified date range. this Report calculates hours worked from the IN and OUT Transactions of the Anti-pass back (APB) Zone...