Profiles, Sections & Rods, Bars, Tubes
19Pages

Profiles, Sections & Rods, Bars, Tubes

Our Passion. Innovation. The processing of aluminium into state-of-the-art semi-finished products is our business and our passion. For almost two centuries we have been guided by innovation, development orientation, flexibility and universality. Our sustainable business growth, continuous modernisation and expansion of business capacities, wide range of products and alloys represent the guarantee that, with us, you will get a reliable business partner. Extrusion is our core production group. In our three plants, we annually produce over 77,000 tons of semi-finished products: extruded and...

Diameter of input billet [mm] 152 203 228 279.4 - 282 Mechanical Equipment Own foundry, with a total capacity of 180,000 tonnes per year (capacity for the needs of extrusion of over 90,000 tonnes) gives us a lot of advantages on the market. It allows us flexible production and development of new alloys and technologies. However, to fill the capacity on the extrusion press we annually process around 25,000 tonnes of material from external suppliers. Therefore we produce over 77,000 tonnes of finished extruded products per year on seven extrusion presses as described below....

Uncompromised Quality BVQI SINCE 1992 The quality of our products is subject to certification and testing in the state-of-the-art, independent labs of the Impol Group, i.e. the labs for metallurgical, metallographic and chemical testing. THE METALLURGICAL TESTING LAB It conducts mechanical tests, hardness tests and tests of the material’s hard-drawing properties. Keeping up with the latest findings in the field of testing, we are consistent in implementing the most recent standard requirements in our testing methods. The metallographic testing lab is concerned with analysing the material’s...

DIFFERENT PROFILES AND SECTIONS Impol manufactures sections for the following uses —— —— —— —— —— —— —— automotive transportation electro industry renewable energy consumer goods construction aerospace Impol products are harmonised with international standards regarding their chemical composition, mechanical properties, dimension tolerances and surface standards: DIN, ASTM, NF, EN, etc. In agreement with the customer, sections can also be made according to ot

Dimensional Limitations of Profiles and Sections A = 250 ALSO 40MN DIRECT PRESS: circle D max = 320mm, profile H max = 250mm

Rods, Bars and Tubes

Fields of use of rods, bars, tubes and profiles automotive & aircraft industries machine bulding transportation interior design electrical industry civil engineering In accordance with international standards, Impol produces extruded and drawn rods and tubes in all standard dimensions. Hard alloys, which are not so easily worked or even difficult to work, predominate. Special attention is given to stress-free states of materials, to free-cutting alloys and to rods for forging. After the production process, the products can be 100% ultrasonically controlled

Other series of alloys Other series of alloys Available Dimensions of Impol ProductsROUND RODS AND BARS d [mm] length [m] Alloys series 6xxx an Ixxx 755/3 8.0 - 180.0 2.0 - 6.0 Depending on dimension and alloy or based on customer’s requirements. Applies to other series of alloys. Depending on dimension and alloy or based on customer’s requirements. or based on customer’s requirements or based on customer’s requirements

SQUARE BARS EXTRUDED a [mm] length [m] Alloys series 6xxx and Ixxx Depending on dimension and alloy or based on customer’s requirements. Other series of alloys Depending on dimension and alloy or based on customer’s requirements. or based on customer’s requirements Other series of alloys 2.0 - 6.0 or based on customer’s requirements

Other series of alloys Other series of alloys HEXAGONAL BARSEXTRUDED s [mm] length [m] Alloys series 6xxx an Ixxx 755/6 8.0 - 120.0 2.0 - 6.0 Depending on dimension and alloy or based on customer’s requirements. Depending on dimension and alloy or based on customer’s requirements. or based on customer’s requirements 2.0 - max 4.5 or based on customer’s requirements

EXTRUDED h [mm] w [mm] length [m] Alloys series 6xxx an Ixxx 755/5 2.0 - 100.0 10.0 - 250.0 2.0 - 6.0 Depending on dimension and alloy or based on customer’s requirements. Other series of alloys Depending on dimension and alloy or based on customer’s requirements.

SEAMLESS TUBES TUBES de[mm] d. [mm] s [mm] length [m] or based on customer’s requirements or based on customer’s requirements (min. 1.5 kg/m and max. 9 kg/m) Square tubes are avaliable from 10x10 to 220x220. In accordance with DIN 3093 standard, from no. 16 to 32.

Comparative Table oF Materials — Alloys for forging — Free-cutting alloys — Other alloys We can also accommodate customer's special requirements other than standard ones. However, only if the existing technology and machinery facilitate the above.

EN AW-6262A is a direct replacement for EN AW-6262 EN AW-6064 is a direct replacement for EN AW-6262 AA-2041 is a direct replacement for AA-2011 AA-2044 is a direct replacement for AA-2007 / AA-2030 AA-2028A is a direct replacement for AA-2007 / AA-2030 EN AW-6023 is a direct replacement for EN AW-6012 and EN AW-6262 EN AW-6026 is a direct replacement for EN AW-6012 and EN AW-6262 AA-6028 is a direct replacement for EN AW-6012 and EN AW-6262

ALLOYS FOR OTHER APPLICATIONS

» Aluminium is a reason to believe in a zero waste future. About 75% of the aluminium produced at any time is still in use.