CCDCAMERAS SPECIFICATIONS IMPERX^ CAMERAS FRAME GRABBERS IMAGING SOLUTIONS INTERFACES AVAILABLE: Resolution Sensor Sensor Format Pixel Size Frame Rate Standard Clock Frame Rate Overclocked Maximum Frame Rate Minimum S/N Ratio Output Format Analog Gain Control Black Level Control Digital Gain and Offset RGB Gain and Offset White Balance Shutter Speed Exposure Control Long Integration Regions of Interest (ROI) Binning H/V Trigger Inputs Trigger Options Trigger Modes Double Trigger (PIV) Interframe External Inputs/Outputs Strobe Output RS232 Interface Pulse Generator Image Overlay Image Enhancement Internal DDR Memory On Board FIFO (GEV & PoE) Gamma Correction Data Corrections Minimum Illumination Lens Mount Video Iris Control Iris, Zoom Focus Control Supply Input Range Power Consumption Size - Width/Height Size - Length Weight Vibration, Shock Environmental Humidity MTBF Regulatory B4020 IMPERX: Technically superior products, full tech support, rapid-response customer care. “Bobcat 2.0” adds many new features, lens control, more memory and enhanced image quality. Each easy to use Bobcat is supported by IMPERX professionals. Camera Link® Base (PoCL), GigE Vision, PoE, CoaXPress 4008 x 2672 (std.), 4032 x 2688 (max.) KAI-11002, CCD 36.28mm (H) x 24.19mm (V) 43.3mm diagonal 43.3mm diagonal 9.0 pm 30 MHz / 4.8 fps 40 MHz / 6.4 fps 39 fps 60dB Mono CCD: 8, 10, 12, 14-bit (Single only) Color CCD: 8, 10, 12 Manual, Auto: 0 - 36dB 1024 steps Manual, 1024 steps Manual Manual Manual, auto, off 1us/step, 1/100,000 to 1/5 sec (nom) Manual, auto, external Up to 16 seconds 7 ROIs, any line to any line, any pixel to any pixel 1x, 2x, 3x, 4x, 8x (Independent for H & V) External (TTL via IN1/IN2), pulse generator, software, computer Level, edge, pulse width, internal exposure, up to 16 seconds trigger delay, debounce Free-run, standard, double, fast, asynchronous, frame accumulation Time: 200 nanoseconds 2 IN, 2 OUT, user programmable 2 strobes, programmable position and duration Yes, programmable Yes, programmable Optical center, programmable H & V lines Threshold, contrast enhancement, knee correction, horizontal flip, negative image, bit shift (+/- 7 places) 2Gb (256 MB) 1Gb (128 MB) G=1.0, G=0.45, user upgradeable LUT Defective/hot pixel correction (static, dynamic), FFC, black level, vertical smear 1 Lux, F/ 1.4 F-Mount (Default), C, M42, EOS, Rodenstock, Custom OEM Auto, programmable Manual, user programmable 12VDC (10V - 15V), 1.5 A inrush CLB 4.0 W, GEV 5.8W, PoE 7.0W, CXP TBD 60mm (W) x 60mm (H) - Applies to all interfaces CLB 45.1mm (L), GEV 63.2mm (L), PoE 76.8mm (L), CXP 52.8mm (L) CLB 350g, GEV 372g, PoE 503g, CXP 354g 100g (20-200) HZ XYZ, 1000g -40°C to +85°C Operating, -50°C to +90°C Storage 10% to 90% non-condensing >660,000 hours @ 40°C (Telcordia SR-332) FCC 15 part A, CE, RoHS

Hirose Connectors Power and I/O Interface B4020 Ordering Information 7 FOCUS + 8 ZOOM -9 ZOOM + 10 UART_COM 11 UART_RX 12 UART_TX Interfaces available Camera Link® Base (CLB) GigE Vision (GEV / PoE) CoaXPress (CXP) Sensor types available Monochrome Bayer Color Accessories (Sold separately) PS12v04-Power Supply w/ 1 input and 1 output PS12v05-Power Supply (as above) and Video Iris Quality Management System ISO 9001:2008 Registered Environmental Management System ISO 14001:2004 Registered DDTC Registered (Directorate of Defense Trade Controls, US Department of State) IMPERX | 6421 congress ave...