8/10/12 bit selectable data output GigE Output Single or Dual tap operation Serial communication Horizontal and vertical binning Highly programmable: resolution • frame rate electronic shutter • long integration external trigger • pre-exposure synchronized triggering* double exposure strobe output • gain and offset area of interest* user LUT Dynamic Transfer Function correction Dynamic Black Level Compensation Temperature monitor Field upgradeable: The IPX-2M30H-G is an advanced, high-resolution progressive scan, fully programmable and field upgradeable CCD camera, built around KODAK'S KAI-2093 interline transfer CCD. The camera provides 1920 x 1080 resolution and delivers 32 frames per second at full resolution. The camera image processing engine is based on a 1 million gate FPGA and 32 bit RISC processor, featuring programmable resolution, AOI, binning, triggering, shutter, long integration, transfer function correction and user LUT. Support for DPC and FFC. • Defective Pixel Correction • Flat Field Correction • Automatic Iris Control - optional • Medical and Scientific Imaging • Machine Vision and Metrology • Remote Sensing

Active Image Pixels Power Connector Active Image Area Pixel size Video Output Camera Interface GigE Output Physical Interface R.M5, 802.3, Ethernet v2.0, IR ICMR UDR PING Data Clock Frame Rate 32 fps (dual) / 16 fps (single), up to 60 fps w/AOl Shutter Speed Rear Camera View Long Integration Gamma Correction Black Level Offset Video Gain Camera Triggering Asynchronous, Hardware, Software Trigger modes Programmable, Normal, Double, Fast Camera Firmware 32 bit RISC, field upgradeable Power Requirements Mechanical Dimensions Strobe Output Active HIGH, for external light source Lens Mount Spectral...