IMPERX IGV-B4820 is an advanced progressive scan, fully programmable CCD camera designed for imaging applications that require high quality images, powerful features and flexibility. The camera is small, light weight, and built around the TRUESENSE Imaging KAI16000 7.4 micron interline transfer CCD image sensor with a 43.3 mm optical format. IMPERX IGV-B4820 provides an image resolution of 4904 x 3280 and delivers up to 4.2 frames per second at full resolution. The camera’s 14 bit internal data image processing engine is based on an industrial grade high-speed, high-density FPGA, enabling a broad standard feature set and easy implementation of demanding custom imaging solutions. The thermally optimized, mechanical and electrical design plus the extended operating temperature range (-40°C to +85°C), and high MTBF of 660,000 hours @ 40C, make this GigE Vision® camera a perfect fit for the most demanding industrial, medical, scientific and military applications. This camera is also available with CoaXPress and Camera Link® interfaces. Features 4904/4872 x 3280/3248 Mono or color 8, 10, 12 bit single or dual output (16 bit is single only) Normal and over-clock operation (3.2/4.2 fps) 10/100/1000 Gigabit Ethernet LAN (RJ-45) RS232 serial communication Analog and digital gain and offset control 1x, 2x, 3x, 4x, 8x horizontal and vertical binning Eight (8) independent horizontal and vertical AOIs Programmable horizontal and vertical resolution Programmable line time, frame time and speed Programmable external trigger Internal/External exposure control Standard, fast, frame accumulation, double and asynchronous triggering modes Aerial Mapping Aerial Robots: Military, Police Aerospace Agriculture Automation Automotive Biometrics Broadcasting Printed Circuit Board (PCB) Electronics Energy/Solar/Wind Power Flat Panel Inspection Food/Beverage Homeland Security Law Enforcement Intelligent Traffic Systems (ITS) Medical Devices/Imaging Automatic gain, exposure and iris control Automatic white balance Internal/External H and V sync input/output Left/right digital bit shift Test image with image superimposition Built in pulse generator Programmable I/O mapping Dynamic transfer function correction Dynamic black level correction Defective and hot pixel correction (static/dynamic) Temperature monitor Field upgradeable firmware Customer defined Look Up Table (LUT) Two dimensional Flat Field Correction Reverse image (H mirror) MTBF of 660,000 hours @ 40°C Metrology Microscopy Military/Defense Pharmaceuticals Particle Image Velocimetry (PIV) Radiology Robotics Scientific Apps Surveillance Semiconductors Transportation Textile/Apparel

BOBCAT IGV-B4820 Specifications Maximum Resolution Sensor Type Pixel Size Frame Rate Max Frame Rate Minimum S/N ratio Video Output Output Format Binning H & V Area of Interest Shutter Speed Long Integration Gamma Correction Video Gain Exposure and AGC Iris Control Strobe Output Image Overlay 7.40 µm 3.2/4.2 fps (normal/overclock) 18 FPS 60 db RJ45 CAT5e, CAT6 Mono or color 8, 10, 12 bit single or dual output (16 bit is single only) x1, x2, x3, x4, x8 8 independent AOIs, 2 x 2 to 4904 x 3280 1/100,000 to 1/3.2 sec (nom) Up to 16 sec G=1.0, G= 0.45, user upgradable LUT 36 dB range, 1024 steps,...