IMPA ABRASIVI srl Via Rivoli, 6 – 10090 TRANA (TO) – Italy P.IVA 02136870017 E-mail: [email protected] Tel: +39 011.933117 Web: www.impaabrasivi.it

SINCE 1960 WE HAVE BEEN PRODUCING ABRASIVE DISCS AND SECTORS. IMPA, SECIALIST IN THE PRODUCTION OF ABRASIVE TOOLS, HAS CONSOLIDATE OVER 60 Successful years on the domestic and international markets Impa abrasivi is a company founded in the province of Turin in the early 60s, as a manufacturing company for the production of abrasive tools. We specialize in the production of cutting discs for metallographic specimens, abrasive sectors and ultra-thin discs for industrial applications. Since the beginning of our business, we have qualified in the production of thin cutting abrasive discs for all...

Impa Abrasivi COMPANY SPECIALIZED IN PRODUCTION OF DISCS FOR CUTTING METALLOGRAPHIC SPECIMENTS AND ULTRA-THIN DISCS FOR INDUSTRIAL APPLICATION IMPA ABRASIVES Manufacturing company for the production of abrasive tools The breadth of the production range and the positive results achieved in recent years have allowed us to successfully offer ourselves to wholesalers as well as domestic and foreign end users. Our production process is followed with a “quality manual” according to ISO 9001 standards. E-mail: [email protected] Web: www.impaabrasivi.it Contact hours Monday – Friday: 08.00 – 17.00...

Impa Abrasivi IMPA ABRASIVES BELIEVES IN SUSTAINABILITY Environmental sustainability IMPA abrasivi srl considers the environment a primary asset. The company, as far as technologically possible, is committed to reducing environmental impacts within its operating process, with particular attention to energy saving, water consumption, the reduction of atmospheric emissions and waste production. The company considers the need to protect the environment, for the benefit of the community and future generations, essential and therefore adopts the most suitable measures to preserve the environment itself,...

Impa Abrasivi Metallographic cutting discs ^f63m/s-80m/s) resin bond / i______a i______• : . - i-3 * In the field of cutting off metallographic specimens, IMPA ABRASIVI establishes itself with its abrasive discs among the best national and foreign leaders, the result of continuous research into highly selected raw materials from the best corundum producers available on the world market. Our experience, which now takes advantage of 60 years of continuous analyses, has allowed us to develop abrasive cutters suitable for any material in the metallographic field (from highly alloyed steels to particular...

Available holes (mm): 16/20/22/25.4/30/32/40/51/76 Available grits: 60-80-100-120 • Also available on request in the reinforced version (80m/s) • High performance extra version (type AMC) also available on request

Metallographic cutting discs (63m/s-80m/s) resin bond Impa Abrasivi STANDARD SERIES HARDNESS TABLE Impa reference Ferrous metals <15 HRC (soft material) Ferrous metals 30-50 HRC (medium soft material) Ferrous metals 50-58 HRC (medium hard material) Ferrous metals 60-70 HRC (hard material) Ferrous metals 70 HRC (very hard material) Non-ferrous metals (cast iron, bronze, copper, aluminum) Non-ferrous metals (titanium) Non-ferrous metals (stone, granite, marble)

Ultra thin cutting discs (50m/s) – resin bond Impa Abrasivi Ultra thin cutting discs (50m/s) – resin bond Available holes (mm): 6/8/10/13/14/16/20/22/30/32/40/51/76 Available grits: 80-1

Abrasive segments for flat surface rectification - resin bond Segments - technical specifications In the field of FLATTENING and FLAT GRINDING, IMPA stands out with its resinoid SEGMENTS, built with: 99% pure corundum, silicon carbide, in the grits and hardnesses suitable for any application. The requests must be accompanied by the quotas as follows: L = segment length C1 = major chord C2 = minor chord S = thickness R = radius

Flat reinforced cutting wheels for stationary machines (80m/s) – resin bond Impa Abrasivi Flat reinforced cutting wheels for stationary machines (80m/s) – resin bond Diameter mm Available holes (mm): 16/20/22.5/25.4/30/32/40/50 SPECIFICATIONS A 36 R High performance generic cutting disc suitable for carpentry – iron and mild steels. Disc for those who demand cutting speed and durability, suitable for iron, stainless steel. full profiles Suitable for cast iron and non-ferrous materials Type for stone – marble – building materials i

Non reinforced resinoid abrasives discs for cutting and sharpening on stationary machines (50m/s – 63m/s) Impa Abrasivi Non reinforced resinoid abrasives discs for cutting and sharpening on stationary machines (50m/s – 63m/s) Diameter mm

Non reinforced resinoid abrasives discs for cutting and^ sharpening on stationary machines (50m/s - 63m/s) ( Impa Abrasivif Available grits: • In addition to the minimum indicated in the table, any thickness can be obtained • The thickness increase varies by 0.1 mm according to the customer's request Also available on request in the reinforced version (80m/s) Grinding of pins on plastic and steel moulds Stainless steel Grinding of small steel pipes, alloy steel pipes, wire Grinding of tools (wire saws) Cutting for metallographic tests Cutting of tools (e.g. for drill replacement)

Flat reinforced cutting wheels for electric and pneumatic machines (80m/s) – resin bond Impa Abrasivi Flat reinforced cuttin wheels for electric and pneumatic machines (80m/s) – resin bond Thickness mm *Thicknesses can vary according to customer requirements, the increase in thickness varies by 0.1 mm according to request Available holes (mm): 6-6.4-7-8-9.53-10-13-16 SPECIFICATIONS A 60 S Specification particularly suitable for iron, sheet metal cutting, small tubes, spec

Impa Abrasivi • Flat reinforced cutting discs for portable machines (80m/s) - resin bond Diameter mm Thickness mm Hole mm 22.23 SPECIFICATIONS a 46 r Type suitable for iron, sheet metal, steel. a 60 r Suitable type for iron, mild steel. c 46 q Suitable type for stone/marble/granite