Intelligent Control Station
4Pages

{{requestButtons}}

Catalog excerpts

Intelligent Control Station - 1

3D Intelligent Control Station 10.4” TFT Colour Toushscreen 32K of Colours, VGA(640 x 480) MicroSDTM Data storage up to 2GB CAN Port, RS 232/RS 485 Real Time Clock 10 - 30VDC Power Supply Built in Ethernet Port Free Configuration Software USB Port for Programming and Flash Drive IP65(NEMA4) Remote IO Communication Optional: Modem (SMS, GSM, GPRS) Options & Ordering Codes Standard Options I3D12Z/00000-SEHF I3D12Z/10D03-SEHF I3D12Z/13C14-SEHF I3D12Z/20B05-SEHF Void 12 Digital Input 24 Digital Input 12 Digital Input + Temperature PT100/TC

Open the catalog to page 1
Intelligent Control Station - 2

3D Intelligent Control Station General Specifications Required Power (Steady State) Primary Voltage Range Required Power (Inrush) Relative Humidity Clock Accuracy Operating Temperature Storage Temperature Display Type Screen Resolution Display Memory Scan Rate Display Life User Keys Screen Supported Colurs Weight Approvals 650 mA @ 24VDC, 1.3A @ 12VDC 10 - 30VDC 25A for <1ms @ 24VDC - DC switched 15A for <1ms @ 12VDC - DC switched 2.5A for <1ms @ 24VDC - AC switched 5 to 95% Non-condensing +/- 35ppm maximum at 25oC (+/- 1.53 Minutes per Month -10oC to +60oC -30oC to +70oC 10.4” VGA TFT (550...

Open the catalog to page 2
Intelligent Control Station - 3

3D Intelligent Control Station Communication Ports Communication Ports MJ1 Serial Port Pin Assignments Pin Signal Signal Description MJ2 Serial Port Pin Assignments Pin Signal Signal Description 8 7 RS-232 Transmit Data RS-232 Receive Data RS-232 Receive Data Ground +5 VDC max RS-232 Request to Send RS-232 Clear to Send Receive / Transmit Negative +5 VDC 60mA max RS-485 Transmit Negative RS-485 Transmit Positive RS-485 Receive Negative Receive / Transmit Positive External Jumper Configuration SW 1 ON - MJ2 RS 485 Termination On (121Ω) SW 2 & 3 ON - MJ2 RS 485 in Half Duplex mode SW 2 & 3...

Open the catalog to page 3
Intelligent Control Station - 4

3D Intelligent Control Station Accessory Products 1. Communication Cable: RS 232 Serial Communication Cable for programming and i3 Controllers, Part No. i3PC45. 2. IP65 RJ45 Panel Mounted Socket: Brings either MJ1 or MJ2 ports outside by installing this into a 22.5mm cut out, Part No. i3PAD. 3. USB to RS232 Converter for PC’s without a serial Com port to communicate with the controllers, Part No. PC501. Add - ins 1. GSM Modem Expansion Card - Send and recieve SMS messages via the i3, dial up connection over GSM data link for remote programming, debugging etc. Or use a GPRS always-on data...

Open the catalog to page 4

All IMO Precision Controls Limited catalogs and technical brochures

  1. Drive 2

    6 Pages

  2. VXA Brochure

    12 Pages

  3. Push Buttons

    32 Pages

  4. MCB Brochure

    8 Pages

  5. Din Terminals

    64 Pages

  6. Panel Products

    24 Pages

  7. HVAC Brochure

    12 Pages

  8. Jaguar Drives

    20 Pages

  9. Terminal Block

    68 Pages

  10. Relays

    36 Pages

  11. Audible Devices

    126 Pages

  12. Solar Cube

    4 Pages

  13. BX series

    3 Pages

  14. XGB

    5 Pages

  15. IMO

    56 Pages