*mydirectindustry

Catalogs
IMO Precision Controls Limited
i 3 C Lite Intelligent Control Station

i 3 C Lite Intelligent Control Station

1 / 5 PagesView full catalog

i 3 C Lite Intelligent Control Station

Product catalog summary

Key Features:

480 x 272 color LCD display
MicroSD™ data storage
Real-time clock
1 CAN Port, 1 RS-232, 1 RS-485
IP65 (NEMA 4X) protection
USB port for programming
Free configuration software
1 x Ethernet port

Options & Ordering Codes:

Comms Ports: RS-232, RS-485
Programmable Keys: 4 Virtual Programmable Keys
Color Display: 480 x 272 px

Standard Options:

Digital Input: 12
Analogue Input: 4 (12 Bit)
Analogue Output: 1 2 (12 Bit)
Digital Output: 2 6 (Relay) + 2 (DC)

Connectivity:

Serial Ports: 1 RS-232, 1 RS-485
USB mini-B USB 2.0 (480MHz) for Programming & Data Access
CAN: CAN 2.0; Remote I/O, Peer-to-Peer Comms, i3 Configurator
Remote I/O: Modbus RTU, Modbus TCP, iCAN; IOS, Smart I/O, iSmart
Removable Memory: MicroSD™ (support for 32GB max)

Technical Specifications:

Required Power: 120mA @ 24VDC
Primary Voltage Range: 24VDC ± 20%
Inrush Current: 30A for <1ms
Relative Humidity: 5 to 95% Non-Condensing
Clock Accuracy: +/-90 seconds per month at 20°C
Operating Temperature: -10°C to +60°C
Storage Temperature: -20°C to +70°C
Weight: 0.360kg

Control & Logic Specifications:

Control Language Support: Advanced Ladder Logic, Full IEC 61131-3
Logic Program Size & Logic Scan Rate: 256kB Maximum, 1.2ms/kB
I/O Support: Digital Inputs - 1024, Digital Outputs - 1024, Analogue Inputs - 256, Analogue Outputs - 256

Display Specifications:

Display Type: 4.3” Colour LCD
Resolution: 480 x 272 Pixels
Keys: 4 Virtual Slide Keys (touch)
Screen Memory: 256kB
User-Programmable Screens: 250 (max. 30 objects per screen)
Backlight: LED - 20,000 hours to reach 50% brightness

Approvals:

Certifications: CE, UL, cUL, FCC
Shock Tested: IEC 60068-2-27
Vibration Tested: IEC 60068-2-6
IP Protection Degree: IP65 (NEMA 4X)

Port Connectors:

High Capacity MicroSD Slot
USB Mini-B Port
CAN Port (via RJ45)
RS232/RS485 Serial Connector

Wiring Connectors:

DC Input / Frame: Solid/Stranded wire; 12-24AWG (2.5-0.2mm). Strip length - 0.28” (7mm)
Torque rating: 4.5-7.0 in/lbs (0.50-0.78Nm)
DC- is internally connected to I/O 0V
Class 2 power supply must be used to meet UL requirements

CAN Communication:

CAN Pin Assignments: Modular jack (8 posn RJ45)
Termination for the CAN port may be enabled from the System Menu or System Register

Serial Communication:

MJ1: RS-232 w/full handshaking
MJ2: RS-485 half-duplex
RS-485 termination and biasing via System Menu or System Register

Ethernet Communication:

10/100 Ethernet port with automatic MDI-X (crossover detection)
Ethernet configuration is done via the i3 Configurator Hardware Configuration

Catalog excerpts

i 3 C Lite Intelligent Control Station-1

Key Features • 480 x 272 colour LCD display • MicroSD™ data storage • Real time clock • 1 CAN Port, 1 RS-232, 1 RS-485 • IP65 (NEMA 4X) • USB port for programming • Free configuration software • 1 x Ethernet port Standard Options DI DO AI AO Colour Display 480 x 272 px CL Digital Output Programmable Keys 4 Virtual Programmable Keys Y Digital Input 12 Digital Inputs 10 plus Flash Card Analogue Input 4 (12 Bit) D NOTE: This controller is expected to be UL approved by April 2019 For more information visit www.imopc.com Errors and omissions excepted. Subject to change without notice. © 2018 IMO Precision Controls Ltd

Open the catalog to page 1

i 3 C Lite Intelligent Control Station-2

Technical Specifications Technical Datasheet General Specifications Control & Logic Specifications Required Power (Steady State) Display Specifications Control Language Support Display Type Serial Ports I/O Specifications Digital DC Inputs Digital Relay Outputs Digital DC Outputs - Sourcing Digital DC Outputs - Sinking PWM For more information visit www.imopc.com Errors and omissions excepted. Subject to change without notice. © 2018 IMO Precision Controls Ltd

Open the catalog to page 2

i 3 C Lite Intelligent Control Station-3

Technical Datasheet Input Ranges Analogue Outputs Number of Channels Minimum Current Load Approvals Certifications Capacity MicroSD USB Mini-B Port CAN Port (via RJ45) RS232/RS485 Serial Connector Analogue I/O DC Inputs DC Power DC Outputs Primary Power Port Pins DC Input / Frame Solid/Stranded wire; 12-24AWG (2.5-0.2mm). Strip length - 0.28” (7 mm) Torque rating: 4.5-7.0 in/lbs (0.50-0.78Nm) DC- is internally connected to I/O 0V Class 2 power supply must be used to meet UL requirements For more information visit www.imopc.com Errors and omissions excepted. Subject to change without notice. ©...

Open the catalog to page 3

i 3 C Lite Intelligent Control Station-4

Position / Pin Digital Model Technical Datasheet Model -10D14 Digital Out Position / Pin Digital Model For more information visit www.imopc.com Errors and omissions excepted. Subject to change without notice. © 2018 IMO Precision Controls Ltd

Open the catalog to page 4

i 3 C Lite Intelligent Control Station-5

i3C Lite Intelligent Control Station CAN Communication Serial Communication IMP Technical Datasheet 8 ( Modular jack (8 posn RJ45) Reserved areas maintain backward compatibility with other models For more information visit www.imopc.com Errors and omissions excepted. Subject to change without notice. © 2018 IMO Precision Controls Ltd

Open the catalog to page 5

i 3 C Lite Intelligent Control Station

i 3 C Lite Intelligent Control Station

Catalog excerpts

All IMO Precision Controls Limited catalogs and technical brochures