Low pressure pumps Opti Line ACG
12Pages

The ACG pumps are used for a number of differ-ent uids:Lubrication oil, fuel oil, vegetable oil, hy drau lic oil and other hydraulic uids, glycol, polymers, emulsions, and any non-aggressive uid with suf cient lubricating properties.When so required the ACG pump may be certi- ed according to any of following classi cation societies: DNV, BV, LRS, ABS, RS, GL, RINA, KR, NK or CCS. > Maximum discharge pressure is 16 bar. > Maximum differential pressure is 16 bar and minimum 1 bar For low viscosity this value is reduced according to the table below. It may also be reduced at high speed/high...

Pump series ACG (Power rotor diameter, mm)045, 052, 060, 070 Size N = Nodular cast iron B = Flange mounting K = Low leadN = Normal lead D = High Lead size 070 Design generation 8 Lead Generation Material in pump body Mounting (Size of coupling selected)H, J, K, L, M P = Pressure relief valve included Magnetic shaft coupling Valve Code group omitted for standard design Special design > www.imo.se 5 > OACG8 1101.01 GB size="-2">

The Opti Line ACG pump is ange-mounted to an electric motor via a con nect ing frame and a magnetic coupling and has an angle bracket for mounting hor i zon tal ly and vertically, see mounting in struc tio > Spare parts for these pumps are easily available from stock. For detailed in for ma tion and know-how about service, see the Installation & Service instruction for ACG-pumps or contact your IMO repre- sentative. 10 > www.imo.se OACE3 1101.01 GB size="-2">