CRUSHING & SCREENING
10Pages

CRUSHING & SCREENING

CRUSHING & SCREENING RANGE I MMA has a wide range of crushing line consists of jaw and impact crushers as primary, secondary and tertiary purposes. In addition to screen, conveyor belts, washers, rock drill, etc. The following table describes typical uses of commonly used crushers. Under the lights of current mining and crushing/screening technology, IMMA has a range of following machinery and systems to be a complete solution supplier, from medium to hardest stones with a starting 50 tph capacity up to 1200 tph. various stationary crushing & screening plants with primary, secondary and...

JAW CRUSHERS IMMA Jaw Crusher consists of a heavy duty single toggle jaw crushers, are constructed of solid fabricated plate frames with reinforcing ribs throughout. The crusher’s components are of high strength design to accept high horsepower draw. Austenitic manganese steel is used for both fixed and movable jaw faces. Heavy flywheels allow crushing peaks on tough materials Single toggle jaw crushers featured by a hydraulic toggle adjusting mechanisms: Easy operating and long-lived Hydraulic toggle adjustment mechanism Various feeding sizes AC Motor powered with 1450 rpm Austenitic steel...

IMPACT CRUSHERS (VSI – HDK – PDK) The impact crushers are usually used as secondary or tertiary crushing purposes. IMMA also supplies a primary impact crusher to use the advantages of impact crushing. Impact crushers involve the use of impact rather than pressure to crush material. The material is contained within a cage, with openings on the bottom, end, or side of the desired size to allow pulverized material to escape. In Horizontal Shaft Impactor, the incoming feed drops vertically through the chamber, strikes the rotating rotor or impeller bars and is fractured within the chamber. Due...

GRIZZLY SCREENS Screens are indispensable components of the mining plants. Our grizzly screenss designed to have a wide range of applications with high capacities under IMMA warranty. Industrial protected vibromotor, Steel spring wire, Labyrinth tapped SS 4140 screen gears, Welded solid structure Constant chassis and solid structure Reliable spare parts and tools, Long-lived and minimized operation cost, Standard Models: Model 2TE1640 1600 mm x 4000 mm with 2 decks Model 4TE2060 2000 mm x 6000 mm with 4 decks Model 3TE1650 1600 mm x 5000 mm with 3 decks Model 4TE2060 2000 mm x 6000 mm with...

“VCR” TECHNOLOGY Welcome to the Extraordinary VCR Technology for micronized screening Vibration, is only seen on the screen-wires, not in the machinery. Non-vibrating structure body Less vibrating structure enables long lifetime! Multi-vibration Units to create a controlled resonance on the screen-wire (VCR Tech) Customized calibration for each mineral and screening purpose at startup only Sandwich Sealing helps to protect the screen-wires and side panels Energy saving up to 60% No blockage of mineral / material during processing at the screen-wires Extended screen-wire lifetime Adjustable...

“VCR” DRY SCREENS With various sizes (S), decks (D), vibromotor(M) and Vibration Units (U):

“VCR” WET SCREENS With various sizes (S), decks (D), vibromotor(M) and Vibration Units (U):

IMMA MINING SOLUTIONS Bunkers & Hopper Mobile Units Turn-key Projects

IMMA Global Technick S.A. Barbaros Bulv., 102/5, Zincirlikuyu, 34340 Istanbul, Turkiye Drève de l’Infante 27A5, 1410 Waterloo- Belgique Tel: +90 212 337 36 57 Fax: +90 212 337 36 10 E-mail: info@immaglobal.com Web: www.immaglobal.com