Code: 1700-12-12 Description: BSP Niple – Junction ¾” Code: 1700-12-12NI Description: BSP Niple – Junction ¾” Zinc-Nickel Surface Treated Code: X1700-12-12 Description: BSP Niple Junction ¾” Stainless Steel (AISI 316L) Code: 7430-16SR-1NI Description: DIN male stud coupling 16 S- G ½ (Form B ISO 1179-4) - BODY ONLY - (ZINC-NICKEL) Code: 7430-16SRNI Description: DIN male stud coupling 16 S- G ½ (Form B ISO 1179-4) - (ZINC-NICKEL) Note: with nut (cod. 7400) and cutting Ring (c

Product Traceability is guaranteed by a dedicated stamping process developed by I.M.M Hydraulics Spa in order to trace material, supplier and batch number. This is a value-added feature in line with the company total quality management approach. MATERIAL NORMALIZATION SIGN (IF APPLICABLE) REFERENCE FOR DELIVERY NUMBER YEAR IDENTIFICATION LETTER MATERIAL IDENTIFICATION NUMBER SUPPLIER REFERENCE LETTER MATERIAL NORMALIZATION SIGN (IF APPLICABLE) DELIVERY REFERENCE NUMBER YEAR REFRENCE LETTER MATERIAL REFERENCE NUMBER SUPPLIER REFERENCE LETTER

Hydraulic Systems need adaptors installation to close and have an integrated and finished circuit. Adaptors are used mainly to: • Adjust the thread dimensions (by increasing or reducing them); • Change the thread: connection type change to have an easier flexible hoses connection or rigid pipe • Adjust tubes end: tube-to-fittings connection, tube - to - tube connection. Adaptors can have the following thread configuration: metric, BSPP, BSPT, SAE, UN/UNF, NPT/NPTF Thread Reference Standard

CONNECTION TYPE AND REFERENCE STANDARD Usually called as DIN, metric adaptors comply with DIN 2353, DIN 3861 e DIN 3859 - ISO 8434-1 reference std. Leakage resistance guaranteed by sealing angled faces at 24°, con o senza o-ring (metal-to-metal sealing). Thread type is metric. Metric adaptors are largely used by OEM in agriculture and industrial field. The related sealing system provides high pressure performance level, high leakage resistance, good high torque value resistance and the possibility to perform repetitive assembly and disassembly provided that O-ring is replaced.

ORFS ADAPTERS ORFS adaptors comply with ISO 8434-2 and SAE J1453. This connection type is designed to provide the best sealing at the higher pressure. Sealing is guaranteed by the male O-ring compression on the flat female surface. The mechanical joint is assured by the UN/UNF thread. 1 - straight stud connector body a - Stud end in accordance with ISO 6149-2 ORFS adaptors are mainly used in US and UE market and they are widely used by ground movement machines OEM. Sealing system assures excellent performances in high pressure and vibration condition, leakage resistance, good high torque value...

JIC ADAPTERS Usually called as JIC these adaptors comply with ISO 8434-2 and SAE J514. Sealing guaranteed by metalto-metal joint with a flared angle of 37° without components deformation. Thread are straight UN/UNF type. 1 - straight stud connection body a - Stud end in accordance with ISO 1179-3, ISO 6149, ISO 99742 o ISO 11926-3 JIC adaptors are mainly used in US market for industrial field. Sealing type assured good performance at high pressure condition.

BSP ADAPTERS The related reference standards are BS5200 and ISO 8434-6. On BSPP connection the sealing is guaranteed by metal to metal surface contact with a surface angle of 60°. On BSPT connection the sealing is guaranteed by the thread and for this reason it is necessary to add a sealing material. La forma della filettatura ha un semiangolo dei fianchi di 55 gradi. Cross section and components of typical 60° O -Ring KEY 1 - male 2 - nut 3 - o-ring 4 - famale connector BSP connection is widely used in Europe, Japan and Commonwealth area for industrial applications.

NPT/NPTF ADAPTERS Adapters NPT/NPTF conform to ANSI B1.21.1 e SAE J476, ANSI B1.20.3. Sono caratterizzati da filettature coniche, con semiangolo dei fianchi di 60 gradi. In the NPT / NPTF connection, the seal is carried out on the thread with the aid of appropriate sealing materials. If a 30 ° half-angle is made on the nipple, the seal can be carried out in conjunction with a NPSM swivel female. The NPT/NPTF connection is mostly used in the USA, where it is mainly used in the industrial sector for the transfer of fluids under pressure. The sealing system guarantees good performance with medium-high...

SURFACE TREATMENTS Interpump Fluid Solutions makes use of its own plants for the realization of surface treatments such as «standard» zinc and nickel zinc, ensuring the high quality and performance standards required by Our systems ensure a low environmental impact by complying with the most stringent standards in terms of environment and safety. The hexavalent chromium-free passivation ensures a low environmental impact. In addition to increasing the performance of the product, the sealing is designed to ensure low coefficient of friction values.

in The available solutions ensure high reliability in all work environments: The standard zinc treatment, with a minimum thickness of pure zinc of 8pm and white passivation, ensures a corrosion resistance higher than the market standard. The appearance is matte metallic. Zn-Ni treatment in accordance with the ISO 19598 specification Fe/ZnNi8/An/ T2 The zinc nickel treatment (Zn-Ni alloy coating (Ni 12% -16%, thickness 8-12 microns) has a gray-blue color with slight iridescence. It is indicated when a high resistance to corrosion is required in severe exposure conditions. Zinc nickel treatment...

PORT AND STUD ENDS DIMENSION Non- Adjusable Metric Parallel Thread ISO 6149-2/-3 Adjustable Metric Parallel Thread ISO 6149-2/-3 Port (Parellel Thread) Male Stud Metric Thread ISO 6149-1 Sealing with O-Ring for non-adjustable and O-ring with washer for adjustable. For all new designs ISO Technical Committee recommends ISO 6149 connection type.

PORT AND STUD ENDS DIMENSION Non- Adjusable Thread UN/UNF ISO 11926-2/-3 Adjustable Thread UN/UNF ISO 11926-2/-3 Port (Parellel Thread) Male Stud UN/UNF Thread ISO 11926-1 (SAE J1926-1) Sealing with O-Ring for non-adjustable and O-ring with washer for adjustable. For all new designs ISO Technical Committee recommends ISO 6149 connection type. Male stud conforming to ISO 11926-3 and 11926-2 are identical to those conforming to SAE J514 and SAE J1453