*mydirectindustry

Catalogs
IMM Hydraulics
INTERNATIONAL STANDARDS

INTERNATIONAL STANDARDS

Product catalog summary

Overview: The document outlines technical specifications and applications for hydraulic hoses under the Hypress and INTERPUMP brands, adhering to international standards such as EN, ISO, and SAE. It categorizes hoses based on their specifications, construction, recommended fluids, temperature ranges, and dimensions.

Hypress EASY K 1SC and 2SC:

Specifications: EN 857 1SC/2SC, ISO 11237
Features: Compact, NO-SKIVE, smooth cover, with 1 or 2 steel wire braids for reinforcement.
Fluids: Suitable for mineral and biological oils, glycol-water based fluids, water, and lubricants.
Temperature: -40 to +100°C, with water-based fluids up to +70°C.
Dimensions: Various sizes with specific pressure ratings and bending radii.

INTERPUMP Hypress One 1SN and Two 2SN:

Specifications: Exceeds EN 853 1SN/2SN, SAE 100R1AT/2AT, ISO 1436 1SN/2SN
Features: NO-SKIVE, impulse tested, reduced bending radius, with 1 or 2 steel wire braids.
Fluids and Temperature: Similar to Hypress EASY K hoses.
Dimensions: Available in various sizes with enhanced pressure ratings for 2SN.

INTERPUMP Hypress 1SC, 2SC, and R17:

Specifications: Exceed EN 857 1SC/2SC, ISO 11237, SAE 100R17
Features: NO-SKIVE, impulse tested, MSHA cover certification, isobaric pressure rating for R17.
Fluids and Temperature: Similar to previous hoses.
Dimensions: Various sizes with specific pressure ratings.

INTERPUMP Hypress FOUR SP and 4SP:

Specifications: EN 856 4SP, ISO 3862 4SP
Features: High tensile spiral, high flexibility, MSHA cover.
Fluids and Temperature: Similar to previous hoses.
Dimensions: Various sizes with specific pressure ratings.

Hypress UniLock:

Specifications: SAE 100R6, EN 854 1TE
Features: Unilock fittings, easy assembly, safety factor 4:1.
Fluids and Temperature: Similar to previous hoses.
Dimensions: Various sizes with specific pressure ratings.

General Notes:

Dimensions and characteristics are subject to change.
Data is for informational purposes and does not imply warranty beyond product specifications.
Non-conformance with instructions may be dangerous.

EN 854 2TE and 3TE Specifications:

Construction: Braided hose with oil-resistant synthetic rubber inner tube, textile braid reinforcement, and synthetic rubber cover.
Recommended Fluids: Mineral and biological oils, glycol-water based fluids, water, and lubricants.
Temperature Range: -40 to +100°C for petroleum-based fluids, -40 to +70°C for water-based fluids.
Product Details: Includes dimensions, maximum working pressure, burst pressure, bend radius, and weight for various sizes.

SAE 100R5 and 100R4 Specifications:

Construction: Features abrasion-resistant textile braid cover and steel wire braid reinforcement for R5; two textile braids and one spiral braid for R4.
Recommended Fluids: Hydraulic fluids, petroleum-based, glycol-water based, and lubricants.
Temperature Range: -40 to +100°C continuous, with specific limits for water-based fluids.
Product Details: Lists dimensions, maximum working pressure, burst pressure, bend radius, vacuum ratings, and weight for various sizes.

Marking: All hoses are marked with white ink branding, with no customization available. The SAE 100R4 hoses have a 'mylar' marking option.

Catalog excerpts

INTERNATIONAL STANDARDS

Open the catalog to page 1

INTERPUMP Hypress 1SC INTERPUMP Hypress 2SC INTERPUMP Hypress R17 INTERPUMP Hypress FOUR SP Hypress UniLock Dimensions and general characteristics may be changed at any time, data contained here in are only for information purpose only and it does not enlarge, amend or imply any warranty other than provided by us with the product. Any use of the product not in conformance with our instructions may be dangerous.

Open the catalog to page 2

Hypress EASY K 1SCTFA201KI APPLICABLE SPECIFICATIONS Compact hose according to EN 857 ISO 11237. NO-SKIVE solution. Smooth cover. Inner tube: Synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: 1 high tensile steel wire braids. Coverage: Smooth synthetic rubber, resistant to oils, fuels and atmospheric conditions. Recommended fluids: Mineral and biological oils, glicol-water based, water, lubricants. working temperature: from -40 to +100°C, from -40 to +70° C for water based fluids, from 0 to +70°C water. Marking: Ink-jet

Open the catalog to page 3

Hypress EASY K 2SCB TFA202KI APPLICATIONS APPLICABLE SPECIFICATIONS EN 857 2SC - ISO 11237 Compact hose according to EN 857 ISO 11237. NO-SKIVE solution. Smooth cover. Inner tube: Synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: 2 high tensile steel wire braids. Coverage: Smooth synthetic rubber, resistant to oils, fuels and atmospheric conditions. Recommended fluids: Mineral and biological oils, glicol-water based, water, lubricants. working temperature: from -40 to +100°C, from -40 to +70° C for water based fluids, from 0 to +70°C water. Marking: Ink-jet

Open the catalog to page 4

INTERPUMP Hypress One 1SN APPLICABLE SPECIFICATIONS TFD2012 NO-SKIVE hose. Exceed Burst specification. impulse tested up to double requirements. Reduced bending radius. Lightness. Smooth cover up to 1” Inner tube: Synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: 1 steel wire braid. Coverage: Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions. Recommended fluids: Mineral and biological oils, glicol-water based, water, lubricants. working temperature: from -40 to +100°C (intermittent 120°C), from -40 to +70° C for water based...

Open the catalog to page 5

INTERPUMP Hypress Two 2SNTFD2022 APPLICATIONS APPLICABLE SPECIFICATIONS NO-SKIVE hose. Exceed Burst specification. impulse tested up to double requirements. Reduced bending radius. Lightness. Smooth cover up to 1” Inner tube: Synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: 2 high tensile steel wire braids. Coverage: Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions. Recommended fluids: Mineral and biological oils, glicol-water based, water, lubricants. working temperature: from -40 to +100°C (intermittent 120°C), from -40...

Open the catalog to page 6

APPLICATIONS : APPROVALS:ABS, CCSAPPLICABLE SPECIFICATIONSExceed EN 857 1SC - ISO 11237 INTERPUMP Hypress 1SCTFE201K NO-SKIVE hose. Exceed Burst specification. Impulse tested up to double requirements. Inner tube: Synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: 1 steel wire braid. Coverage: Smooth synthetic rubber, resistant to oils, fuelsa and atmospheric conditions. Recommended fluids: Mineral and biological oils, glicol-water based, water, lubricants. working temperature: from -40 to +120°C (intermittent 135°C), from -40 to +70° C for water based fluids,...

Open the catalog to page 7

APPLICATIONSAPPROVALS :MED, BV, LLOYD’S, ABS, NKK, KR, DNV, CCSAPPLICABLE SPECIFICATIONSExceed EN 857 2SC - SAE 100 R16 - ISO 11237 Compact hose with Low bend radius (R16). NO-SKIVE solution. Exceed standard Burst requirements. impulse tested up to double requirements. Certifications valid only for MSHA cover. Inner tube: Synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: 2 high tensile steel wire braids. Coverage: Smooth synthetic rubber, resistant to oils, fuelsa and atmospheric conditions. Recommended fluids: Mineral and biological oils, glicol-water based,...

Open the catalog to page 8

APPLICATIONS :APPLICABLE SPECIFICATIONS SAE 100R17 - SAE J 517 - ISO 11237 R17 Isobaric pressure rating 210 bar/3000 psi. No skive compact hose. Inner tube: Synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: High tensile steel. 1 braid up to size 1/2", 2 braids from size 5/8" onwards. Coverage: Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions. Recommended fluids: Mineral and biological oils, glicol-water based, water, lubricants. working temperature: from -40 to +100°C (intermittent 120°C), from -40 to +70° C for water based...

Open the catalog to page 9

gUSEGi! APPLICABLE SPECIFICATIONS 4 high tensile spiral high flexibility. Performance according EN856 - ISO 3862 4SP. Inner tube: Synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: 4 steel wire spirals. Coverage: Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions. Recommended fluids: Mineral and biological oils, glicol-water based, water, lubricants. working temperature: from -40 to +100°C (intermittent 120°C), from -40 to +70° C for water based fluids, from 0 to +70°C water. Product number Available with MSHA and Mega cover....

Open the catalog to page 10

APPLICATIONS :APPROVALS:MED, DNV - GL, BV, MSHAAPPLICABLE SPECIFICATIONSEN 856 4SP - ISO 3862 4SP 4 high tensile spiral high flexibility. MSHA cover. Exceeding bust requirements. Inner tube: Synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: 4 steel wire spirals. Coverage: Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions. Recommended fluids: Hydraulic fluids petroleum based (mineral oils), glicol-water based, water, lubricants. working temperature: from -40 to + 100° C petroleum based fluids (Intermittent 120°C), from -40 to...

Open the catalog to page 11

Hypress UniLockB TFS0006I APPLICATIC APPLICABLE SPECIFICATIONSSAE100R6 - EN 8541TE UniLock fittings series, easy assembly, no tools or clamps required. Safety factor 4:1. Do not use for compressed air braking systems and circuits subject to high pressure impulses. Inner tube: Oil resistant synthetic rubber. Reinforcement: 1 textile braid. Coverage: Synthetic rubber resistant to oils, fuels and atmospheric conditions. Recommended fluids: Hydraulic fluids petroleum based (mineral oils), glicol-water based, water, lubricants. working temperature: from -40 to + 100° C petroleum based fluids, from...

Open the catalog to page 12