Overview

This document provides detailed technical specifications for various hydraulic hose fittings and ferrules, including swaged ferrules (skive), NPTF, BSP, JIC, Metric, ORFS, SAE, and 'CAT' flanges, as well as hose junctions. It includes product numbers, hose inner diameters (I.D.), dimensions, and compatibility information. The data is intended for informational purposes and subject to change without notice.

1. Swaged Ferrules (Skive)

Swaged ferrules are presented with product numbers such as 004N, 0042, 0013, 00J4, and 00J6. Each ferrule type lists hose I.D. sizes in inches and millimeters, along with key dimensions (D, L, Length) and compatible hose types (e.g., R13, 4SH, HyTraktion, MegaJet).

• 004N Series: Hose I.D. from 3/4" to 2" with lengths ranging from 60 to 99 mm, compatible with R13, 4SH, R15, and 4SP hoses.
• 0042 Series: Sizes 1.1/4" and 1.1/2" for IS42 and HyTraktion hoses.
• 0013 Series: Wide range from 5/8" to 3" hose I.D., compatible with R13 and R15 hoses.
• 00J4 and 00J6 Series: Specific sizes for HySpir 500 and MegaJet hoses respectively.

2. Threaded Fittings

Includes NPTF Male 60° cone (0370H), BSP Male Parallel 60° cone (0350H), BSP Female 60° cone with thrust wire (0050H), BSP 90° and 45° swept elbows with thrust wire (0150H, 0250H), and JIC Male and Female 74° cone fittings (0850H, 0900H) with thrust wire nuts.

• Dimensions include hose I.D., dash size, thread size, cut-off lengths, and drop heights for elbows.
• BSP fittings often include BSP O-Ring Female noted by (*).
• JIC fittings specify cone angles and include swept elbows at 90° and 45° with thrust wire.

3. Metric Fittings

Metric Male and Female 24° seat heavy fittings (0450H, 0084H) and their 90° and 45° swept elbows (0184H, 0284H) are detailed with thread sizes (e.g., M36-2, M42-2), hose I.D., and dimensional data including cut-off and drop heights.

4. ORFS Fittings

ORFS Male (S350H), Female Back Hexagon (S05TH), and 90° and 45° swept elbows (S150H, S250H) are specified with hose I.D., thread sizes, cut-off lengths, and drop heights. Some elbows have slip-on nuts indicated.

5. SAE Flanges

SAE flanges are categorized by pressure ratings (3000 PSI and 6000 PSI) and include straight, 90°, and 45° flange types (1250H, 1050H, 1150H for 3000 PSI; 1300H, 1100H, 1200H for 6000 PSI). Each flange lists hose I.D., dash size, flange diameter, drop height (for elbows), and cut-off lengths.

6. 'CAT' Flanges

Includes straight, 90°, and 45° 'CAT' flanges (130SH, 110SH, 120SH) with hose I.D., dash size, flange dimensions, drop heights, and cut-off lengths.

7. Hose Junctions

Hose junctions (D050H) are listed with hose I.D., dash size, and cut-off lengths.

Important Notes and Recommendations

• Dimensions and general characteristics may change at any time; data is for information only.
• No warranty is implied beyond the product warranty.
• Use of products not in conformance with instructions may be dangerous.

Summary of Critical Parameters

• Hose I.D. Range: From 5/8" (15.9 mm) up to 3" (76.2 mm) depending on fitting type.
• Thread Types: NPTF, BSP (male/female), JIC, Metric, ORFS, SAE, and 'CAT'.
• Cone Angles: 60° for NPTF and BSP, 74° for JIC.
• Pressure Ratings: SAE flanges rated at 3000 PSI and 6000 PSI.
• Fitting Types: Straight, 45° and 90° swept elbows, flanges, ferrules, and junctions.

This structured data supports selection and specification of hydraulic hose fittings for various industrial applications, ensuring compatibility and safety when used according to manufacturer instructions.