Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. IMM Hydraulics
  3. HIGH PERFORMANCE
video corpo

HIGH PERFORMANCE

HIGH PERFORMANCE
1 / 15 PagesView full catalog

HIGH PERFORMANCE

Product catalog summary
Overview: This document outlines the technical specifications and applications for various INTERPUMP hose models, including HyCelsius, HyFreeze, PilotFlex, Pilot Plus, LongLife, MARATHON, and TREEATHLON. Each section provides details on construction, applicable specifications, recommended fluids, and working temperature ranges.
1. INTERPUMP HyCelsius:
  • Models: One 1SN (TFDH012B), Two 2SN (TFDH022B)
  • Specifications: EN 853 1SN, SAE 100R1AT for One 1SN; EN 853 2SN, SAE 100R2AT for Two 2SN
  • Features: Wide temperature resistance, not suitable for air brake applications, synthetic rubber inner tube, steel wire braid reinforcement.
  • Working Temperature: -40 to +135°C (intermittent 140°C)
2. INTERPUMP HyFreeze:
  • Models: 1SN (TFDL012N), 2SN (TFDL022N)
  • Specifications: EN 853 1SN, SAE 100R1AT for 1SN; EN 853 2SN, SAE 100R2AT for 2SN
  • Features: Suitable for very cold environments, synthetic rubber inner tube, steel wire braid reinforcement.
  • Working Temperature: -40 to +100°C, minimum external temperature -50°C
3. INTERPUMP PilotFlex 120:
  • Model: TFE2PF2
  • Specifications: IMM specification
  • Features: High abrasion resistance, compact and flexible, tested up to 1,000,000 cycles.
  • Working Temperature: -40 to +100°C (intermittent 120°C)
4. INTERPUMP Pilot Plus 150:
  • Model: TFE2P15
  • Specifications: IMM specification
  • Features: Lightweight, high flexibility, tested up to 1,000,000 impulse cycles.
  • Working Temperature: -40 to +120°C (intermittent 135°C)
5. INTERPUMP LongLife:
  • Models: 1SC (THE201K), 2SC (THE202K)
  • Specifications: Exceed EN 857 1SC, ISO 11237 1SC for 1SC; Exceed EN 857 2SC, ISO 11237 for 2SC
  • Features: High abrasion resistance, no-skive hose, pressure rating exceeding standards.
  • Working Temperature: -40 to +120°C (intermittent 135°C)
6. INTERPUMP MARATHON 2SC:
  • Model: THE2M2K
  • Specifications: IMM, exceed EN 857 2SC, ISO 11237 2SC
  • Features: No-skive hose, impulse tested up to 1,000,000 cycles.
  • Working Temperature: -40 to +120°C (intermittent 135°C)
7. INTERPUMP TREEATHLON:
  • Model: THE0T3K
  • Specifications: IMM specs
  • Features: Compact hose, no-skive construction, approved up to 500,000 impulse cycles.
  • Working Temperature: -40 to +100°C (intermittent 120°C)
General Note: Dimensions and characteristics may change, and data is for informational purposes only. Usage not conforming to instructions may be dangerous.
Technical Document Summary
1. Product Specifications
The document provides detailed specifications for various hydraulic hoses under the INTERPUMP HyGreen series, including models 4SH, R13, and R15. Each model is designed for specific applications and comes with different dimensions, pressure ratings, and weight specifications. The hoses are compatible with biological oils and exceed EN standards, with impulse testing up to 1,000,000 cycles.
2. Approvals and Standards
The hoses have received approvals from several international bodies, including DNV-GL, BV, LLOYD'S, ABS, NKK, KR, and MED. They comply with applicable specifications such as EN 856, ISO 3862, SAE 100R13, and SAE 100R15.
3. Construction and Materials
The hoses feature an inner tube made of synthetic rubber, extruded without joints, and reinforced with steel wire spirals. The outer cover is made of anti-abrasive synthetic rubber, resistant to oils, fuels, and atmospheric conditions. MSHA covers are available, with non-MSHA versions also offered.
4. Recommended Fluids and Temperature Range
The hoses are suitable for use with mineral and biological oils, glycol-water-based fluids, water, lubricants, and compressed air. They operate effectively within a temperature range of -40°C to +100°C, with intermittent peaks up to 120°C.
5. Product Variants and Ordering Information
Each hose model is available in various sizes, with specific product numbers and ferrule series. Non-MSHA versions and embossed brand versions are available upon request, with specific codes provided for ordering.
See more

Catalog excerpts

HIGH PERFORMANCE-1

HIGH PERFORMANCE

 Open the catalog to page 1
HIGH PERFORMANCE-2

INTERPUMP Pilot Plus 150 INTERPUMP TREEATHLON INTERPUMP HyGreen R13 INTERPUMP HyGreen R15 Dimensions and general characteristics may be changed at any time, data contained here in are only for information purpose only and it does not enlarge, amend or imply any warranty other than provided by us with the product. Any use of the product not in conformance with our instructions may be dangerous.

 Open the catalog to page 2
HIGH PERFORMANCE-3

INTERPUMP APPLICATIONS : HyCelsius One 1SN TFDH012B Wide range temperature resistance. Hoses are not designed and not approved for "air brake” applications on railway and/or mobile equipment. Do not use with compressor. Inner tube: Synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: 1 steel wire braid. Coverage: Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions. Recommended fluids: Mineral and biological oils, glicol-water based, water, lubricants. working temperature: from -40 to +135°C (intermittent 140°C). Marking: Available...

 Open the catalog to page 3
HIGH PERFORMANCE-4

INTERPUMP HyCelsius Two 2SNTFDH022B APPLICATIONS : IfflHEIfl APPLICABLE SPECIFICATIONS Wide range temperature resistance. Hoses are not designed and not approved for "air brake” applications on railway and/or mobile equipment. Do not use with compressor. Inner tube: Synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: 2 high tensile steel wire braids. Coverage: Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions. Recommended fluids: Mineral and biological oils, glicol-water based, water, lubricants. working temperature: from -40...

 Open the catalog to page 4
HIGH PERFORMANCE-5

APPLICATIONS :APPLICABLE SPECIFICATIONS EN 853 1SN - SAE 100R1AT Suitable for very cold enviroments. Inner tube: Synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: 1 steel wire braid. Coverage: Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions. Recommended fluids: Mineral and biological oils, glicol-water based, water, lubricants. working temperature: from -40 to +100°C, min. external temperature -50°C. Marking: Available only "embossed"

 Open the catalog to page 5
HIGH PERFORMANCE-6

Suitable for very cold enviroments. APPLICABLE SPECIFICATIONS Inner tube: Synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: 2 high tensile steel wire braids. Coverage: Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions. Recommended fluids: Mineral and biological oils, glicol-water based, water, lubricants. working temperature: from -40 to +100°C, min. external temperature -50°C. Product number Marking: Available only "embossed"

 Open the catalog to page 6
HIGH PERFORMANCE-7

APPLICATIONS : INTERPUMP PilotFlex 120TFE2PF2 APPLICABLE SPECIFICATIONS IMM specification Smooth cover with high abrasion resistance. User friendly and Easy to Handle configuration. Extreme compactness and flexibility with the lowest bend radius. Tested up 1.000.000 cycles. Safety factor 4:1. Inner tube: Synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: 1 high tensile steel wire braid. Coverage: Smooth synthetic rubber, resistant to oils, fuelsa and atmospheric conditions. Recommended fluids: Mineral and biological oils, glicol-water based, water, lubricants....

 Open the catalog to page 7
HIGH PERFORMANCE-8

INTERPUMP Pilot Plus 150 TFE2P15 APPLICATIONSAPPLICABLE SPECIFICATIONS IMM specification Lightweight. Compact design. High flexibility. Tested up 1.000.000 impulse cycles at rated working pressure. Inner tube: Synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: 1 high tensile steel wire braid. Coverage: Smooth synthetic rubber, resistant to oils, fuelsa and atmospheric conditions. Recommended fluids: Mineral and biological oils, glicol-water based, water, lubricants. working temperature: from -40 to +120°C (intermittent 135°C), from -40 to +70° C for water based...

 Open the catalog to page 8
HIGH PERFORMANCE-9

APPLICATIONS :APPROVALS :MED, RINA, BV, LLOYD’S, NKK, KR, DNVAPPLICABLE SPECIFICATIONSexceed EN 857 1SC- ISO 11237 1SC No-SKIVE hose. High abrasion resistance. Pressure rating exceeding standards. Easy to install. SMOOTH COVER up to 1”. Inner tube: Synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: 1 high tensile steel wire braids. Coverage: Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions. Recommended fluids: Mineral and biological oils, glicol-water based, water, lubricants. working temperature: from -40 to +120°C (intermittent...

 Open the catalog to page 9
HIGH PERFORMANCE-10

APPLICATIONS :APPROVALS :MED, RINA, BV, LLOYD’S, ABS, NKK, KR, DNV, CCSAPPLICABLE SPECIFICATIONSexceed EN 857 2SC - ISO 11237 No-SKIVE hose. High abrasion resistance. Pressure rating exceeding standards. Tested up to 1.000.000 cycles up to 1". Easy to install. SMOOTH COVER up to 1". Inner tube: Synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: 2 high tensile steel wire braids. Coverage: Anti-abrasive syntetic rubber, resistant to oils, fuels and atmospheric conditions. Recommended fluids: Mineral and biological oils, glicol-water based, water, lubricants. working...

 Open the catalog to page 10
HIGH PERFORMANCE-11

APPLICATIONS :APPLICABLE SPECIFICATIONS IMM - exceed EN 857 2SC - ISO 11237 2SC NO-SKIVE hose. Exceed EN specification. Impulse tested up to 1.000.000 cycles. Inner tube: Synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: 2 high tensile steel wire braids. Coverage: Smooth synthetic rubber, resistant to oils, fuelsa and atmospheric conditions. Recommended fluids: Mineral and biological oils, glicol-water based, water, lubricants. working temperature: from -40 to +120°C (intermittent 135°C), from -40 to +70° C for water based fluids, from 0 to +70°C water. Product...

 Open the catalog to page 11
HIGH PERFORMANCE-12

INTERPUMP TREEATHLONAPPLICATIONS : APPLICABLE SPECIFICATIONS IMM SPECS Compact hose. NO-SKIVE construction. NBR tube compound compatible with several fluids. Approved up to 500.000 impulse cycles. Tested at 120% Max WP. Inner tube: Synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: 3 high tensile steel wire braids. Coverage: Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions. Recommended fluids: Mineral and biological oils, glicol-water based, water, lubricants. working temperature: from -40 to + 100° C petroleum based fluids...

 Open the catalog to page 12

All IMM Hydraulics catalogs and technical brochures

  1. Skiving
    Skiving

    3  Pages

  2. Cutting
    Cutting

    7  Pages

  3. Crimping
    Crimping

    25  Pages

  4. Adapters BSPP 60°
    Adapters BSPP 60°

    62  Pages

  5. Adapters ORFS
    Adapters ORFS

    43  Pages

  6. Adapters JIC 37°
    Adapters JIC 37°

    56  Pages

  7. Standard Tail
    Standard Tail

    85  Pages

  8. Interlock Tail
    Interlock Tail

    22  Pages

  9. Hyblast / Multispiral Tail
    Hyblast / Multispiral Tail

    9  Pages

  10. INTERNATIONAL STANDARDS
    INTERNATIONAL STANDARDS

    16  Pages

  11. Thermoplastic
    Thermoplastic

    9  Pages

  12. PTFE
    PTFE

    4  Pages

  13. HYSOBARIC LINE
    HYSOBARIC LINE

    10  Pages

  14. Premium adaptors & tube connectors
    Premium adaptors & tube connectors

    308  Pages

  15. Machines
    Machines

    59  Pages

  16. One Piece
    One Piece

    106  Pages

  17. Stainless Steel Fittings
    Stainless Steel Fittings

    80  Pages

  18. Fittings
    Fittings

    162  Pages

  19. Hydraulic Hose & Accessories
    Hydraulic Hose & Accessories

    128  Pages

  20. Quick Couplings
    Quick Couplings

    52  Pages

  21. MGQUIX
    MGQUIX

    40  Pages

  22. INTERNATIONAL STANDARDS
    INTERNATIONAL STANDARDS

    16  Pages

  23. Adapters DIN 24°
    Adapters DIN 24°

    67  Pages

  24. Low Pressure Fittings
    Low Pressure Fittings

    10  Pages

  25. N Tail
    N Tail

    27  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.