SONO - MOISTURE PROBES FOR THE CONCRETE INDUSTRY
8Pages

USING A SUNDIAL TO MEASURE TIME IS OUT OF DATE! WHY DO YOU MEASURE WE MOISTURE OF SAND, GRAVEL AND CONCRETE WITH OUTDATED TECHNOLOGY? MOISTURE PROBES FOR THE CONCRETE INDUSTRY Simply the better method to measure!

OUTDATED MOISTURE PROBES COST YOU MONEY! Anyone involved with the concrete industry is well aware of the problems connected with the production of cement. The main issue is that it is difficult to control and that there is consequently always a risk of ending up with non-acceptable results which cost dearly. Complicated calibration processes for individual recipes, laborious recalibration after only short periods due probe wear, incorrect added water quantities – all these factors cost time and money. Due to the innovative TRIME® radar technology, it is finally possible for the first time...

SONO-probes ELIMINATE the Sie KEIN TEURES AUSWERTEMit SONO-Sonden benötigen necessity for EXPENSIVE EVALUATING DEVICES, whichFeuchtesonden oft der Fall ist. GERÄT wie dies bei anderen many other probes require. The Intelligenz ist schon in den Sonden eingebaut. into the Die necessary “intelligence” is already integrated SONO-probes. EASY INITIAL COMMISSIONING, SIMPLE INSTALLATION, and EINFACHE INBETRIEBNAHME, einfach anschließen und then just Umständliches are ready to go. Laborious calibration messen. connect – you Einkalibrieren gehört der is a thing of thean. Vergangenheit past....

INCREASE THE LEVEL OF SAFETY AND REDUCE DAMAGE-RELATED COSTS DUE TO NOVEL MEASURING METHODS AT THE QUALITY CONTROL SONO-PROBES DEPLOY THE EXCEPTIONAL TRIME ®RADAR METHOD The SONO TRIME®-technology consists of a „guided radar wave“ which travels along a radar track at almost the speed of light. Subsequently, the measuring filed spreads out above the probe i n discoidal form into the material. The measuring field of SONO probes is also operational even at lower material heights above the probe (within certain limits of course). If the material above the probe features a greater height,...

DECISIVE FACTORS TO ACHIEVE PRECISE RESULTS IN CONCRETE PRODUCTION PRACTICE HAS PROVEN AGAIN AND AGAIN THAT THE CORRECT INSTALLATION OF MOISTURE PROBES PLAYS A SIGNIFICANT ROLE. THIS FACTOR SHOULD NOT BE UNDERESTIMATED IN TERMS OF ACHIEVING LONG-TERM STABLE RESULTS FOR CONCRETE RECIPES USING AGGREGATE MOISTURE PROBES WITH AN ACCURACY OF ±2 LITER WATER PER M3 CONCRETE. THE FOLLOWING FACTORS AND PROBE CHARACTERISTICS MUST BE CONSIDERED TO ACHIEVE PRECISE RESULTS: VARIATIONS IN THE GRAIN SIZE DISTRIBUTION (e.g. broken or polished sand) can cause considerable measuredvalue fluctuations of...

THE RIGHT SOLUTION FOR ANY INSTAL SONO PROBES HAVE PROVEN THEY MOISTURE MEASUREMENT OF SAND 0-4mm EVEN OLDER PLANTS CAN BE OPERATED MORE EFFICIENTLY In older plants where no PLC-technology for water dosing is available, it i moisture content of single aggregates with the SONO-VIEW. Regardless wheth up to four probes, the display dynamically adapts the digit height and provid readability even at larger distances. Due to built-in intelligence inside the SON pendently capable to detect the Start and the End of a batch sequence and th trol signals to establish the average moisture value of a...

LLATION SITE AND ANY APPLICATION IMPROVE THE CONCRETE QUALITY MOISTURE MEASUREMENT OF GRAVEL AND GRIT 4-32mm is possible to visualize the her these are only single or des you with best possible NO probes, these are indeherefore do not require consubsequently visualize the MOISTURE IS NO LONGER W BE PERFORMED WITH MOISTURE MEASUREMENT OF CONCRETE SONO-VARIO Xtrem PROBES WHICH OPTIMIZE YOUR APPLICATION SONO moisture probes can be configured ideally and easily for the individual respective application. Depending on the application, e.g. for moisture measurement under a silo flap, inside a...

SONO MOISTURE PROBES – THE SURE WAY TO BETTER CONCRETE! SONO-VARIO Standard SONO-VARIO Standard is ideal for measuring the moisture content of sand and gravel up to a grain size of 4mm. The probe head consists of high grade steel with a rectangular ceramic window. SONO-VARIO Xtrem SONO-VARIO Xtrem is ideal for measuring the moisture content of highly abrasive gravel and grit up to a grain size of 32mm. The exchangeable probe head consists of hardened steel with an integrated highly wear resistant special ceramic window. SONO-SILO Standard SONO-SILO Standard is ideal for the measuring of...