R82G -Pressure Regulators Excelon® Plus Modular System — Port size: 1/4” ... 3/8” (ISO G/PTF) — Excelon® Plus design allows in-line installation or modular installation with other Excelon® Plus products — Push to lock adjusting knob with built in tamper resistant feature — Easy to read flush mounted integrated pressure gauge as standard Technical features Integrated as standard Gauge port 1/8 as option Relieving (Standard) Non-relieving (Optional) 33 dm3/s (port size: 1/4”) and 31 dmF/s (port size: 3/8”) at inlet pressure 10 bar (145 psi), 6,3 bar (91 psi) set pressure and a Ap: 1 bar (14,5 psi) droop from set. Air supply must be dry enough to avoid ice formation at temperatures below +2°C (+35°F). Atex: Materials: Body: Die cast aluminium Body covers: ABS Bonnet: POM/Aluminium Valve: PP Elastomers: NBR Regulators R82 are in conformity with Atex 2014/34/EU Technical data R82G — standard models *1) All models shown here are supplied with integrated gauge applicable for flow direction left to right. With flow direction right to left please use the online configurator www.norqren.com/en/support/conflqurators/air-preparation-conflqurator or contact Norgren. Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2017 - 9217c) © 2020 Norgren Ltd

Option selector *1) Substitute Reverse flow Thread form Diaphragm type Knob (down) Outlet Outlet Pressure Pressure (bar) (bar) Outlet pressure Outlet Pressure (bar)(bar) Inlet pressure: 10 bar (145 psi) Range: 0.3 ... 10 bar (4 ... 145 psi) Port size: 1/4” Outlet Pressure (bar) (bar)(bar) Outlet pressure Outlet Pressure Inlet pressure: 10 bar (145 psi) Air Flow (dm /s) Range: 0.3 ... 2 bar (4 ... 29 psi) Port size: 1/4” Flow characteristics 2 *2) Units with 17 bar outlet pressure range are available only with the T-bar adjustment; therefore substitute 2 T at the 7th position and S at the 9th...

Accessories Quikclamp Neck mounting bracket and Panel mounting nut Mounting bracket Page 4 Page 4 Page 4 *1) Flanged version. For other pressure ranges, please see data sheet 5.11.001 *2) For other pressure ranges, please see data sheet 5.11.385 Gauges (For regulators with gauge port instead of integrated port) Center back connection, white face (for full technical specification see datasheet 8.900.900) Lockout device Pressure range Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2017...

Dimensions in mm Projection/First angle AccessoriesQuikclamp with wall bracket Quikclamp ^4 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2017 - 9217c) © 2020 Norgren Ltd

Neck mounting bracket Panel mounting nut Dimensions in mm Projection/First angle Recommended panel hole size: 0 36.25 ... 36.75 mm Panel thickness: up to 4mm Pressure sensing block 14 Porting block Wall Mounting bracket * "1 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2017 - 9217c) © 2020 Norgren Ltd

Porting block 18D Pressure switch Dimensions in Projection/First angle Pipe adaptor 18D Porting block and 18D assembled 16 29 en 8.105.250.06 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2017 - 9217c) © 2020 Norgren Ltd

51D Pressure switch - digital Dimensions in mm Projection/First angle Switch OUT 1, green LED Switch OUT 2, red LED Dustproof protector Connector M12 x 1 Inlet port Alternative inlet port G1/8 plugged Thread for mounting screw Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under »Technical features/ data«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications,...