PRA/882000/M, IVAC Clean Line cylinder Magnetic piston, double acting > 0 32 ... 100 mm > Cylinders and mountings conform to ISO 15552 > Complete functional unit with LED display > Central electrical connector, polarity-safe > Integrated 5/2 or 5/3 valve > Additional output ports (2 & 4) > Integrated flow regulator for speed control > Integrated reed or solid state switches > Protection class IP67, suitable for food and beverage sector > Energy efficient Technical features Medium: Compressed air, filtered, lubricated or non-lubricated Particles size: Class 7, ISO 8573 - 1 (dated 2001) Humidity and water content: Air supply must be dry. Corresponding of the application and working conditions the air must be dry enough to avoid condensate. The pressure dewpoint must be minimum 15° under the application and working conditions. Oil: Class 4, ISO 8573 - 1 (dated 2001) Standard: Based on ISO 15552 (length , mounting pitch and thread dimensions according to ISO 15552. Some outside dimensions different to ISO 15552) Operation: Double acting, magnetic piston, adjustable cushioning Operating pressure: 2 ... 8 bar (29 ... 116 psi) Port size: G1/8, G1/4, G3/8 Cylinder diameters: 32, 40, 50, 63, 80, 100 mm Standard strokes: See below Non-standard strokes: Available (25 ... 1000 mm) Operating temperature: -2 ... +70°C max. (+28 ... +158°F) Supply voltage: 24 V d.c. Multipole connection: M12 x 1 male, 8 pin Power consumption: 1 W max Rating: 100 % E.D. Protection class: IP 67 Life expectation of the cylinder: *1) Stroke < 100 mm: 10 Mio. Cycles Stroke > 100 mm: 5000 km Life expectation of the solenoid valves: 50 Mio. Cycles *1) Life expectation based on laboratory conditions (more details upon request): - Operating pressure: 8 bar - Compressed air: ISO 8573-1, Class 7-4-4 - Ambient temperature: 20° C +/-10° C - Environment: Industrial plant, no contamination such as dust and/or moisture or similar - Position: horizontal - Side load: max. transverse load approx. 1,3% of the theoretical force at 6 bar - Speed: 1,0 m/s for 0 32 to 50 mm 0,7 m/s for 0 63 to 100 mm - Frequency: < 20 cycles / min (in/out) Materials: Profile barrel: anodised aluminium, End covers: pressure diecast anodised aluminium Piston rod: stainless steel, see page 2 Piston rod seals: PUR Piston seals: PUR O-rings: NBR Technical data Theoretical thrusts at 6 bar outstroke (N) 482 Theoretical thrusts at 6 bar instroke (N) 414 Air consumption at 6 bar outstroke (l/cm) 0,056 Air consumption at 6 bar instroke (l/cm) 0,048 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2013 - 1236e) © 2015 Norgren GmbH

PRA/882000/M, IVAC Clean Line cylinder Magnetic piston, double actingCylinder variants Symbol R S C D E V Model with Description Dimensions magnetic piston Page PRA/882000/W2 Cylinder with special wiper/ 7 seal (suitable for appl. with cement, plaster (stucco), arizona sand, hoar-frost or ice) PRA/882000/MU Cylinder with extended 7 piston rod PRA/882000/MG Cylinder with piston rod 8 bellow For the cylinder models style C, D, E, S and V see options selector Option selector Piston rod material Substitute •<Stainless steel (martensitic); R Standard wiper seal Stainless steel (austenitic); S Standard...

PRA/882000/M, IVAC Clean Line cylinder Magnetic piston, double acting Reduced Installation Time & Cost To connect the IVAC you simply run a single ring main to provide an air supply to each unit. There is no mounting of valve islands to the machine framework or inside a cabinet and there is no pipework to run arround the machine to connect each valve to each actuator. Fieldbus cable IO module Y cable Plug with molded cable, 90° Plug with molded cable, straight Air supply One of the advantages of the IVAC cylinders is to use the output ports (2 & 4) from the main valve to operate an additional...

PRA/882000/M, IVAC Clean Line cylinder Magnetic piston, double acting Position Style Corrosion protected Stainless steel Clear anodised aluminium Clear anodised aluminium. Screws: A2 Galvanized steel (ø 32 ... 63 mm) Painted steel (ø 80 & 100 mm) Diecast aluminium Black corrosion protected diecast aluminium. Certified for the food industry. Screws: A2 Galvanized aluminium Inner ring: steel Outer ring: brass Black corrosion protected diecast aluminium Certified for the food industry Inner ring: stainless Steel (austenitic) Outer ring: nickel plated hardened steel Diecast aluminium Bolt: galvanized...

PRA/882000/M, IVAC Clean Line cylinder Magnetic piston, double acting Mountings Model Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2013 - 1236e) © 2015 Norgren GmbH

PRA/882000/M, IVAC Clean Line cylinder Magnetic piston, double actingM12 cables Cable length Plug with moulded cable Y-cable, M12 female IP 67 8 pin, 2 x M12 male 4 pin IP67 M/P74581/2 (straight) M/P74581/5 (straight) M/P74581/10 (straight) Wiring diagram for M12 male connector Valves Wiring diagram for Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2013 - 1236e) © 2015 Norgren GmbH

PRA/882000/M, IVAC Clean Line cylinder Magnetic piston, double acting Dimensions in mm Projection/First angle (without cover) # Stroke 1 Cushion adjustment front end cover 2 Magnetically operated switches (AF 11) 3 LED - magnetically operated switches 4 Main valve Ø Pilot block Output ports (2&4) Air supply Exhaust position, do not obstruct Without function - do not use LED - pilot valve Manual override Cover for cushion and Speed control adjustment Speed control adjustment Cushion adjustment rear end cover * Please insert standard stroke length + Please insert valve function - Please insert...