M/50100 Clamping cylinders, single acting

Product catalog summary

Overview: This document provides technical specifications and guidelines for single-acting clamping cylinders, model M/50100, produced by Norgren GmbH. The document emphasizes the company's commitment to ongoing research and development, allowing for specification changes without prior notice.

Specifications:

Medium: Compressed air, filtered and lubricated.
Operation: Single acting.
Operating Pressure: 2 to 10 bar (29 to 145 psi).
Cylinder Diameters: 8, 12, 20, 32, 50, 63 mm.
Standard Strokes: 4 to 25 mm.
Operating Temperature: -10 to +70°C (+14 to +158°F). Air supply must be dry to prevent ice formation below +2°C (+35°F).
Materials: Piston rod made of stainless steel (austenitic), body of anodized aluminium, and seals of NBR.

Technical Features:

Compact design enabling high thrusts in restricted spaces.
Available cylinder diameters range from 8 to 63 mm.

Technical Data:

Various models (M/50108 to M/50163) with different cylinder diameters and port sizes.
Theoretical thrusts at 6 bar range from 25 N to 1760 N.
Return spring forces and air consumption details provided for each model.

Basic Dimensions:

Dimensions and weights for each model are specified, with details on stroke lengths and corresponding weights.

Warnings and Recommendations:

Products are intended for industrial compressed air systems only.
Do not exceed specified pressures and temperatures.
Consult IMI NORGREN before using with other fluids or in non-industrial applications.
System designers should consider failure modes and provide safeguards to prevent injury or equipment damage.
Specific warnings are included in instruction sheets shipped with the products.

Catalog excerpts

M/50100 Clamping cylinders, single acting-1

M/50100 Clamping cylinders, single acting > 0 8 ... 63 mm > Enable high thrusts to be achieved in restricted space > Compact design Operating temperature: -10 ... +70°C max (+14 ... +158°F) Air supply must be dry enough to avoid ice formation at temperatures below +2°C (+35°F). Materials: Piston rod: stainless steel (austenitic) Body: anodized aluminium Seals: NBR Technical features Medium: Compressed air, filtered and lubricated Operation: Single acting Technical data * Please insert standard stroke length. Standard strokes IMI Precision Engineering Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (1999 - 1006d) © 2015 Norgren GmbH

Open the catalog to page 1

M/50100 Clamping cylinders, single acting-2

M/50100 Clamping cylinders, single actingBasic dimensions M/50108 ... M/50112 M/50120 ... M/50163 Dimensions in mm Projection/First angle Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under »Technical features/data«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI NORGREN. Through misuse, age, or malfunction, components used in...

Open the catalog to page 2

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list