CNC MILLING FOR PLASTIC AND FOAM INDUSTRY
12Pages

:: individual. modular. economic. CNC MILLING FOR PLASTIC AND FOAM INDUSTRY

Welcome to the world of imes-icore. Productivity and economy redefined! imes-icore is specialized in the development, the production, the selling and the service of complete CNC milling systems. By our intelligent modular system with all sides open technology interfaces we are able to exceed your specific requirements. Complex, time or cost-intensive adoptions are no matter at imes-icore. Far from it: imes-icore module technology provides for a price-performance ratio that will convince you. i-mes type series for plastic and foam fabrication could be built up to complete systems with...

competence in CNC & Dental solutions. AREAS OF APPLICATION PLASTIC INDUSTRY :: :: :: :: Milling of plexiglas/acryl Milling of plastics Milling of 3D display models Deflashing plastic parts after the injection moulding process FOAM AND PACKAGING INDUSTRY :: :: Milling of soft foams materials Milling rough foamily materials (e.g. Polystrene, ABS) as transport and pac kaging protection PLASTIC-PROCESSING INDUSTRIY :: :: Milling of fiber-glass reinforced materials (GFK and CFK) Milling of abrasive insulating material AEROSPACE INDUSTRY :: :: Milling of extensive plastic parts Milling of...

imes-icore FLATCOM – Large travel strokes at low price! SPEC IF IE D F O R PLASTIC MILLING coordinate table (XY) in mm Z-gantry clearance in mm Dimensions with control cabinet and cover (LxBxH) in mm The FLATCOM machine series is supplied in four sizes with travel strokes from 700 x 600 mm to 1200 x 1400 mm in rack construction with protection cover. drive system linear guides controlling system The aluminium profiles used with the construction are special profiles, which make a good rigidity possible at simultaneous low weight. The gantry clearance amounts 200 mm (optional 300 mm)....

competence in CNC & Dental solutions. imes-icore GFV/GFY – Maximum Flexibility and Economy GVF/GFY: :: Protection cover: protection against rotary tools, noise level reduction and protection against splinters :: Portal passage: variable passage height between clamping sur face and lower edge Z-axis of 235 mm up to 435 mm :: Propulsion technology: DC or AC servo :: Stable structure of the units by torsioally stiff linear units with i-mes LF 5/6 guidance, aluminium under frame and milling bed with excellent mechanical characteristics :: The electronics boards are located in cabinet systems...

imes-icore GPY – Capacity with high gantry clearance! SPECIFIED FOR MILLING OF HIGH UNITS GPY: :: protective cover conforms to CE safety standard with lateral sliding door :: gantry clearance: 640 mm :: exclusively AC servo drives in all axis :: robust mechanical construction in industrial execution :: X/Z: linear guide LF5; Y: linear guide LF6 :: spindle pitch of ball screw 16 x 5 mm in X/Y/Z-axis :: expandable with the high performance spindle drive ES 915: 3,8 kW / 24.000 rpm SPECIFICATION travel stroke (X/Y/Z) in mm without tool changer travel feed rate (X/Y/Z) dimensions (LxBxH) in mm...

competence in CNC & Dental solutions. imes-icore SFY/SPY – Granite and steel for highest stability up to 5-axis! SPECIFIED FOR HSC AND ALUMINIUM MILLING SFY/ SPY: :: protective cover conforms to CE safety standard with lateral sli ding door :: portal- or gantry design alternatively (SFY-/SPY series) :: gantry clearance up to 700 mm :: high performance AC servo technique in all axis :: robust mechanical construction (granite/steel) :: ball screw spindles 16 x 5 mm; Z: 16 x 2,5 mm :: different milling spindles up to 3,8 kW / 24.000 rpm possible STEEL SPECIFICATION travel stroke (X/Y/Z) in mm...

i-mes CNC water jet cutting– Technology comes to the point! SPECIFIED FOR WATER JET CUT TING WATER JET CUTTING MACHINE ADVANTAGES OF THE PROCEDURE: :: Cold processing, thus no thermal influence on the material :: Low processing forces, suited to pressure-sensitive and flexible ma terial :: Practically no cutting joint, economical raw material handling :: No generation of gas, dust or steams TRAVEL STROKE A high-pressure jet of water is used for the separation of material. CNC-controlled, the cutter head moves over the static work pieces. Any 2D contours can be cut out of plate material. A...

competence in CNC & Dental solutions. POSSIBLE COMBINATION: High pressure pump + guidance machine High pressure pump + 2 guidance machines CUTABLE MATERIALS: :: :: :: :: :: Foam materials: up to 120 mm thickness Plastics, Rupper: up to 25 mm thickness Wood, plywood: up to 8 mm thickness Aluminium, copper: up to 0,5 mm thickness Materials, that cannot - or hardly can - be milled High pressure pump + guidance machine with multiple cutting heads GUIDANCE MACHINE CUTTER HEAD HIGH-PRESSURE PUMP Moves the cutter head opposite to the static work piece Several cutter heads working in parallel...

Milling Automation: Special machines – individual customized units! SPECIAL MACHINE: Pneumatic front safety door coupled with NC program. BASE AXIS COMBINATIONS SPECIAL MACHINE: With integrated loading table and safety light barrier. By the singular, modular and flexible building method of the machine systems we can plan and convert customized CNC automation solutions for the industrial manufacturing within shortest time to your desires and conceptions. The basic machine can get for example completely different dimensions like a series machine, e.g. different travel strokes and gantry...

competence in CNC Dental solutions. Integrierte CAD/CAM software – Automate without limits! Housing manufacturing SPECIAL MACHINE: With integrated loading table and bar code binding. For the man less manufacturing very easily automatic part feeding, tying up at handling systems or robot assemblies can be intergrated. Necessary communication with external control systems is ensured by a multiplicity of free input/outputs of a superior logic control. The CNC units can be expanded with the continuous CAD/CAM software isy CAM 3.2 and /or Pictures by PC 3.2 to a complete system. Therefore you do...