Tile, Masonry and Slab Saws
10Pages

Tile, Masonry & Slab Saws STAINLESS STEEL SURFACE STAINLESS STEEL OR ANODISED EXTRUDED ALUMINIUM CUTTING SURFACE The COMBI 200VA, 250VA machines have a cutting surface made of anodised extruded aluminium. The C350 iPower machine has a cutting surface made of stainless steel. The cutting surface is normally the part most subject to wear and corrosion as it is constantly in contact with water and highly abrasive materials. Stainless steel and anodised aluminium completely eliminate the risk of corrosion and guarantee high resistance to wear. The holes and fretting of the aluminium on the cutting surface facilitate the flow of water to the tray and eliminate the suction effect of the material. ELECTRIC WATER PUMP IMER saws are fitted with an electric pump that ensures a constant flow of water to the cutting disk. The water flow is regulated through a special tap to allow correct disk cooling and optimise cutting. WATER RECOVERY TRAY The water recovery tray is made of plastic to prevent any possibility of corrosion. Thanks to the lightweight material used, the tray is also easy to remove from the machine for cleaning. In the Combi 200VA, COMBI 250VA, C350 iPower, M400 Smart, Masonry 750 models emptying can be carried out without removing the tray from the machine. Aluminium SURFACE All the machines have the possibility of 45° cutting. The cutting head and travel bar can be sloped in just seconds. A clamp ensures the stability of the travel bar, keeping cutting accuracy unchanged. MAXIMUM CUTTING ACCURACY In order to guarantee the maximum cutting accuracy, the travel bar is made of extruded aluminium or steel section bars depending on the models. The runner parts of the cutting head are formed of wheels mounted on sealed ball bearings. This system offers very smooth running and maximum cutting accuracy.

Tile, Masonry & Slab Saws All the machines of the Combi range, starting from the 200 model, have the possibility of vertical cutting for making uninterrupted cuts. To reduce the risks of damage during transport and to facilitate handling and storage operations, all the machines are delivered with cardboard packing. NORMATIVE REFERENCES EASY HANDLING Depending on the models, all Imer saws are provided with various devices to facilitate machine handling and transport: handles, wheels, guides for the hoist trolley and coupling points for taking from above. • Compliance with the requirements of...

Combi 200 VA Water-cooled tile saw - blade Ø 200 mm Standard Equipment It is the small portable tile saw with lots of power. Lightweight, compact and handy to use, it is ideal for installers. It offers high cutting capacity: the blade is suitable for all types of material to be cut. Cuts (90°) vertically to the support surface or cuts in tilted position between 90° and 45° (depth adjustment is maintained in all positions). Side cutting surface optional to extend cutting by 240 mm, maintaining stability, due to a bracket bolted onto the stand. Single-phase 230V/50Hz electric motor, 1.5 kW...

Combi saws - blade Ø 250 mm 250 VA Water-cooled tile Standard Equipment Single-phase 230V/50Hz electric motor, 1.5 kW with thermal protection and minimum voltage coil IP 55 switch ✓ ✓ ✓ IP 67 plug ✓ Cutting guide ✓ Blade Ø 250 mm for tiles - continuous rim ✓ Protractor with large support surface ✓ Anodised extruded aluminium cutting surface ✓ Shatter-resistant plastic tray to contain and recover water ✓ Stand with two rubber wheels It is ideal for cutting ceramic, stone materials, bricks and stone. Lightweight and compact, it ensures maximum cutting precision thanks to its user-friendly...

Combi 250-1000 VA Water-cooled tile saws - blade Ø 250 mm Standard Equipment Single-phase 230V/50Hz electric motor, 1.5 kW with thermal protection and minimum voltage coil IP 55 switch ✓ ✓ ✓ IP 67 plug ✓ Laser pointer ✓ Cutting guide ✓ Blade Ø 250 mm for tiles - continuous rim ✓ Protractor with large support surface ✓ Anodised extruded aluminium cutting surface ✓ Shatter-resistant plastic tray to contain and recover water ✓ Stand with two rubber wheels For a quality cut even on large tiles: 300x600 mm, 900x900 mm and over. Max. cutting length 1000 mm. It offers high cutting capacity: the...

Water-cooled saw with sliding cutting head – blade Ø 350 mm Standard Equipment ✓ Single-phase 230V/50Hz electric motor 2.5 kW ✓ IP 55 circuit breaker with no-volt coil ✓ IP 67 plug ✓ Laser Pointer ✓ Blade Ø 350 mm for bricks/roof tiles/blocks - sectors ✓ Large protractor ✓ Cutting surface in stainless steel ✓ Shatter - resistant plastic tray to contain and recover water ✓ Handles and wheels for manual handling and loading on vehicles ✓ Folding legs Recommended blades ✓ Blade Ø 350 mm for tiles - continuous rim ✓ Blade Ø 350 mm SUPER for hard gres tiles - continuous rim ✓ Blade Ø 350 mm for...

SMART slabs - blade Ø350 14" CUT 350 mm Water-cooled saw for Standard Equipment ✓ Single-phase electric motor: 230V/60Hz 2.2 kW or 115V/60 Hz 1.5 kW ✓ IP55 plug ✓ Diamond blade Ø 350 mm for brick/roof tiles/blocks - segments ✓ Shatter-resistant plastic tray to contain and recover water ✓ Transport handle and wheels for manual handling and loading ✓ Folding legs ✓ Arm guard ✓ Exclusive IMER arm adjustment and locking system ✓ Wooden cutting surface ✓ Carriage anti-overturning system ✓ Large protractor Optional Accessories and recommended blades ✓ Support for cutting at 45° ✓ Diamond blade Ø...

Water-cooled saw for slabs - blade Ø 350 or 400 mm Standard Equipment ✓ 230V/50Hz direct drive electric motor, 2.2 kW ✓ IP67 plug ✓ Blade Ø 350 mm, universal-sectors ✓ Shatter-resistant plastic tray to contain and recover water ✓ Transport handle and wheels for manual handling and loading ✓ Folding legs ✓ Arm guard ✓ Exclusive IMER arm adjustment and locking system ✓ Wooden cutting surface ✓ Carriage anti-overturning system ✓ Large protractor Optional Accessories and recommended blades ✓ Support for cutting at 45° ✓ Diamond blade Ø 350 mm for tiles - continuous rim ✓ Diamond blade Ø 350 mm...