UNIVERSAL & INNOVATIVE SYSTEM FOR THE ENERGY MANAGEMENT

Elements of Energy efficiency Making energy efficiency means reduce operating costs in a system. Today this is mandatory in several applications.

Costs reduction - Reduce the consumption - Save the energy - Maintain the productive levels - Optimize the consumption of water, gas and electric energy - Avoid penalties - Consume when the costs are less 1 Service & production Ensure the quality of energy and service continuity Monitoring & analysis Penalties cos φ Power factor Fattore di potenza The energy provider applies additional costs dr the user works with a power factor lower than the predefined values (costs for excessive reactive energy). Low values determined by inductive are loads and / or harmonic disturbances that require specific...

Energy management advantages The NEMO SX IME energy management system allows for the precise management and use of energy within a building. It allows full control of all activities in order to improve their functioning by anticipating possible breakdowns. Counting and measuring consumptions to reduce costs Monitor and control the installation status to ensure continuity of service improve processes - be aware of its consumption; - control consumptions; - adopt a constant operating regime to smooth consumption over time. - visualize and assess technical alarms in real time; - know installation...

The actions and the functions The NEMO SX IME energy management system allows you to control your installation in only a few steps. Set the system with functions that are customised to your needs. Register the consumption of all the users of the installation. Measure analogue or electrical magnitudes (current, voltage, power, etc...). configure Programme all devices, locally and remotely, to be able to dialogue both with them and with other external systems. supervise Monitor and control all processes by means of IT instruments to optimise energy consumption any time, anywhere. signalling Display...

Supervision system NEMO SX is the new simplified supervision system able to display, measure and control the installation from remote or local position. An autonomous system able to be integrated, which, thanks to the innovative automatic connection system, simplifies the assembly stages and requires no change in the wiring of existing panels. Complete and compact The NEMO SX supervision system, with its extremely compact design, can offer all functions to allow for complete installation supervision: - measurement - status (ON/OFF/fault) - control - pulse count - serial communication - display...

Simple Simple to choose Only 8 modules with dedicated functions to supervise all installations. Simple to install Quick, pre-cabled connections on rail or with patch cords that do not hinder electrical switchboard cabling. Simple to configure Configuration both directly from the panel without the help of a PC or via dedicated software. Adaptable To suit all protection devices The NEMO SX modules are compatible with any type of protection device (modular or power), whatever the brand. For new and existing panels The compact dimensions and the possibility of connecting the system via 2 different...

Very small dimensions: • All the measuring, load status and control modules occupy 1 DIN module • The NEMO SX system is suitable for mounting in solutions with limited spaces Current sensor range: • Thanks to the measuring module with external CT inputs, it is easily adaptable to any type of traditional current transformer • Micro current sensors with mV output for 63 A primary currents (available for single-phase and three-phase and three-single-phase) and 125 A (available in three-phase) • Opening current sensors with mV output for currents from 630 A up to 630

Flexibility • Centralized display of measurements on DIN module easily adaptable to the door • Acquisition of the voltage measurement for each measurement module so that Voltages and Currents (V and I) can be compared for each measurement point • System auxiliary power supply from dedicated power supply (networks from 95 to 240 Va.c.) Multi-departure: • System suitable for measuring panels where there are multiple starts. Thanks to the measuring sensors, high flexibility is possible Precision • Measurements made by the NEMO SX system comply with IEC / EN 61557-12 • Accuracy class of active Energy...

Complete, compact and multifunctional With the same performance as the “classic” models of measuring units, the NEMO SX measuring modules can be used to measure the electrical energy consumed by a single-phase or three-phase circuit and the different electrical values: - Active (kW), reactive (kVAR) and apparent (kVA) power on all phases or cumulative - Simple and compound voltages - Current consumption on each phase - Frequency and Cosφ - Harmonics Compact modules indicating the status of the associated device: Contacts: - open - closed - triggered In addition, for the LED version: - MCCB plugged-in...

All the modules of the new NEMO SX supervision system have compact dimensions, in order to limit as much as possible the space used in the electrical switchboard. Universal control module. Enables to remotely control different electrical loads such as relays, contactors, and motorised controls of modular or power circuit breakers, whatever their brand. The NEMO SX / RS 485 communication interface allows the conversion of data from the NEMO SX network to the MODBUS RS 485 network, in order to display and operate the data outside the electrical enclosure. Stand alone configuration module for the...

simple to choose... The NEMO SX system consists of DIN rail mounting modules. The NEMO SX system does not require a minimum number of modules and it also allows very simple monitoring. Thanks to its scalability, new functions can be added at any time depending on the needs of the installation. MESURE SIGNALLING COMMUNICATION MEASUREMENT SIGNALLING MESURE COMMUNICATION CONTROL CONTROL MEASUREMENT