EASYCONNECT THE NEW QUICK CONNECTION MULTIFUNCTION UNITS

New EASYCONNECT multifunction units The range of NEMO multifunction instruments is completed with the new EASYCONNECTsolutions, available in 4 DIN modules or for 96x96 mm panel installation. The new measurement units are fitted with ROGOWSKI measurement coils (closed and openable), which offer a fast and safe faultproof connection. DIN and door version The measurement units are available in 2 versions: BASIC: Backlit display, built-in RS485 Modbus or Mbus communication, Class 1 (EN61557-12). STANDARD: Backlit graphic display, integrated RS485 Modbus or MBUS communication, 1 or 2 current sensor...

INSTALLATION flexibility Units with closed coils To ensure maximum flexibility and quick installation, the available control units are equipped with Rogowsky closed coils, which can easily be connected by means of a connector suitable for currents up to 125 A. Units with open coils For current from 630 to 6300A, there are control units with open type Rogowski coils that can easily be installed on copper or aluminium bars or cable bundles. This solution guarantees flexibility of installation in both new and existing systems. GUIDE TO CHOOSING OPENABLE ROGOWSKI COILS CODE Open Rogowski Coils

Quick and easy WIRING Quick connections The connection of the current sensors to the flush-mounted and DIN module measurement units is guaranteed by a practical quick connector. This also avoids having to configure the transformation ratio, as the solution is available in a pre-configured kit. Open coils Installing open coils on busbars or cable bundles is extremely quick and easy. A special spacer supplied with the coils allows the conductor being measured to be mounted in the centre of the sensor, therefore ensuring maximum precision at all times. Connection flexibility If the coils need to...

CONNECTION safety Fault-proof connections The connection between current sensors and measurement units is ensured by a pre-wired connector, which in addition to allowing quick connections, also avoids connection errors. The system is extremely practical and functional, reducing installation times. Safety and reliability The EASYCONNECT connection system avoids the common connection error that affects the measurement. The pre-wired connector can only be connected in one direction, therefore ensuring high reliability. In case of connection in the wrong direction with respect to the load, the automatic...

WEBSERVER For consumption control and management The combination of the Webservers with the NEMO multifunction units, the CONTO meters and the NEMO SX system makes it possible to: • analyse data and improve processes. • determine the annual energy demand and define a distribution of consumptions, • analyse long-term evolutions, to monitor performance, • manage multi-site electrical installations remotely and/or locally, using smartphones, tablets, PCs, etc. TheEASYCONNECT measurement units are used to measure, record and transmit values such as active and reactive energy, power, voltages and...

It allows remote configuration, testing, control and display, via a browser on different devices - PCs, smartphones, Web viewers -, of data collected by IME devices: Conto meters, NEMO multifunction unit, NEMO SX measurement system. Pop-up alarms available with the Telegram App for Smartphones (configuration via the Web Server and only with NEMO SX). Web server (DIN version) for 10 (item code SXWS10) or 32 Modbus addresses or pulse modules (item code SXWS32). Web server features: Web server for 255 Modbus addresses or 255 pulse modules (item code SXWS255). - data display on smartphone or tablet...

Multifunction instruments Selection table Model Line No. of current inputs 1 (openable) 750-19503900-7500 Yes Yes 230 (L-N) 400 (L-L) 250-6501300-2500 12.5-32.565-125 Yes (Openable Rogowski) Yes Precision EN/IEC 62053-21 Positive and total For tariff Negative and total Negative for tariff Precision EN/IEC 62053-23 Positive and total For tariff Negative and total Negative for tariff Precision EN/IEC 61557-12 Phase (min, max, instantaneous) Interlinked (instantaneous) Precision EN/IEC 61557-12 Phase Neutral Average-maximum average phase Precision EN/IEC 61557-12 Three phases Phase Active (precision...

Basic Flush mounting 96x96mm BT 1 1 (closed) (openable) 63 125 750-1950-3900-7500 Model Line No. of current inputs Current capacity (A) Network connection Precision EN/IEC 62053-21 Positive and total For tariff Negative and total Negative for tariff Precision EN/IEC 62053-23 Positive and total For tariff Negative and total Negative for tariff Precision EN/IEC 61557-12 Phase (min, max, instantaneous) Interlinked (instantaneous) Precision EN/IEC 61557-12 Phase Neutral Average-maximum average phase Precision EN/IEC 61557-12 Three phases Phase Active (precision EN/IEC 61557-12) Reactive (precision...

Multifunction instruments Multifunction BASIC Easyconnect for low voltage AC three-phase networks Multifunction bidirectional analyser for three or four wires three-phase systems. Thanks to the 63A and 125A mini current sensors being fitted with quick connectors, in addition to the display of the main values of an electrical network, the device also allows to reduce wiring times and the possibility of errors. Measurements completed by the device • Phase and Interlinked voltage • Minimum and maximum voltage • THD voltages • Phase current • Neutral current • Average phase current • Average phase...

Multifunction instruments Multifunction BASIC Easyconnect for low voltage AC three-phase networks Multifunction bidirectional analyser for three or four wires three-phase systems. Thanks to the 630A to 6300A openable current sensors being fitted with quick connectors, in addition to the display of the main values of an electrical network, the device also allows to reduce wiring times and the possibility of errors. Measurements completed by the device • Phase and Interlinked voltage • Minimum and maximum voltage • THD voltages • Phase current • Neutral current • Average phase current • Average...