*mydirectindustry

BTV10

1 / 4 PagesView full catalog

BTV10

Product catalog summary

Voltage Transformer for Low-Voltage Network

Specifications:

Phase-Phase Connection: Primary voltage range is 100...690V with a secondary voltage of 100V. Rated burdens are 10VA (class 0.5), 15VA (class 1), and 30VA (class 3P).
Phase-Neutral Connection: Primary voltage range is 100:√3...690:√3V with a secondary voltage of 100:√3V. Rated burdens are 5VA (class 0.5), 7VA (class 1), and 15VA (class 3P).
Frequency: Nominal frequency is 50Hz, with an operational range of 47...63Hz. An option for 400Hz is available.
Insulation: Dry transformer with air insulation, class B according to EN/IEC61869-1.

Reference Standards: EN/IEC61869-1, EN/IEC61869-3.

Environmental Conditions:

Installation should be non-exposed as per EN/IEC61869-1.
Temperature range for operation is -25°C to 50°C, with a storage range of -40°C to 85°C.
Suitable for tropical climates with a relative humidity of ≤ 85%.

Voltage Error and Phase Displacement Limits:

Voltage error and phase displacement should not exceed specified values at 80% to 120% of rated voltage and burdens between 0% and 100% (for burdens < 10VA) or 25% and 100% (for burdens ≥ 10VA) at a power factor of 0.8 lagging.

Housing and Connections:

Metal housing with protection degree IP00 (IP20 with terminal cover).
Weight is 3.1 kg.
Connections via screw terminals M4 and fast-ons 6.3x0.8mm.

Additional Notes:

Transformers with multiple primary inputs and/or secondary outputs can be manufactured. Specifications to be defined.

Catalog excerpts

SENSORI DI CAMPO SENSORS Trasformatore di tensione per reti bassa tensione Misura e Protezione Trasformatore monofase di tensione INSERZIONE FASE-FASE Tensione primaria: 100...690V Tensione secondaria: 100V Prestazione nominale: 10VA (cl.0,5) – 15VA(cl.1) – 30VA(cl.3P) INSERZIONE FASE-NEUTRO Tensione primaria: 100:√3...690:√3V Tensione secondaria: 100:√3V Prestazione nominale: 5VA (cl.0,5) – 7VA(cl.1) – 15VA(cl.3P) Indicatori Meters Voltage transformer for low-voltage network Measure and Protection Single-phase voltage transformer PHASE-PHASE CONNECTION Primary voltage: 100...690V Secondary voltage: 100V Rated burden: 10VA (cl.0,5) – 15VA(cl.1) – 30VA(cl.3P) PHASE-NEUTRAL CONNECTION Primary voltage: 100:√3...690:√3V Secondary voltage: 100:√3V Rated burden: 5VA (cl.0,5) – 7VA(cl.1) – 15VA(cl.3P) Mutifunzione Contatori Multifunction Static e

Open the catalog to page 1

CODICE ORDINAZIONE / ORDER CODE Secondario / Secondary

Open the catalog to page 2

CONDIZIONI AMBIENTALI ENVIRONMENTAL CONDITIONS LIMITI DELL'ERRORE DI TENSIONE E DELL'ERRORE D'ANGOLO LIMITS OF VOLTAGE ERROR AND PHASE DISPLACEMENT (EN/IEC61869-3) (EN/IEC61869-3) Errore di tensione (rapporto) in percentuale ± Percentage voltage (ratio) error ± 80...120%Un Errore d’angolo ± / Phase displacement ± Minuti Minutes Centiradianti Centiradians 1,2 L’errore di tensione e I’errore d’angolo a frequenza nominale non devono superare i valori indicati in tabella, ad ogni tensione compresa tra l’80% e il 120% della tensione nominale e con prestazione compresa tra il 0% e il 100% della...

Open the catalog to page 3

La I.M.E. S.p.A. si riserva in qualsiasi momento, di modificare le caratteristiche tecniche senza darne preavviso. / I.M.E. S.p.A. reserves the right, to modify the technical characteristics without notice. DIMENSIONI DIMENSIONS NOTA: è possibile realizzare trasformatori con più ingressi primari e/o uscite NOTE: it is possible to manufacture transformers with various primary inputs Caratteristiche tecniche (precisione, prestazioni, isolamento, ecc.) e Inserzione Fase-Fase Dimensional and technical specifications (accuracy, rated burden, insulation, WIRING DIAGRAM Connection Phase-Neutral- Connection...

Open the catalog to page 4

All IME Spa catalogs and technical brochures

Archived catalogs

Product guide
274 Pages