WORK SUPPORTS - 24 Pages

Add to MyDirectIndustry favorites
WORK SUPPORTS

Catalog excerpts

WORK SUPPORTS WORK SUPPORTS WORK SUPPORTS COMPACT PNEUMATIC WORK SUPPORTS PNEUMATIC WORK SUPPORTS PRECISION WORK SUPPORT WORK SUPPORTS CYLINDRICAL WORK SUPPORTS COIL SPRINGS FOR CYLINDRICAL WORK SUPPORTS REMOTE-CONTROL UNITS WORK SUPPORTS WITH CAM HANDLE HORIZONTAL WORK SUPPORTS

 Open the catalog to page 2

WORK SUPPORTS WORK SUPPORTS COMPACT WORK SUPPORTS WITH CAM HANDLE COMPACT WORK SUPPORTS

 Open the catalog to page 3

WORK SUPPORTS WORK SUPPORTS WORK SUPPORTS IMAO's Work Supports Solutions for workpiece chattering !! during machining low-profile part Easy Setup Support a workpiece by the piston from bottom Lock the piston by turning the knob *) Knob piston The piston fits to bottom surface of workpiece automatically by the inside spring. *) The piston locking element differs by work support's type, such as screws or handles. We also provide air operated types. PRECISION WORK SUPPORT One-touch operation & Stable support capacity The displacement of the piston does not exceed 3μ m when locked Locking...

 Open the catalog to page 4

WORK SUPPORTS WORK SUPPORTS OTHER WORK SUPPORTS For Higher Holding Capacity HORIZONTAL WORK SUPPORTS WORK SUPPORTS CYLINDRICAL WORK SUPPORTS Toolless operation WORK SUPPORTS WITH CAM HANDLE Assist you also in small space! COMPACT WORK SUPPORTS For Frequent Set-ups in Tight Space Hybrid of Toolless & Compact! COMPACT WORK SUPPORTS WITH CAM HANDLE Pneumatic Types Lock the piston by air supply COMPACT PNEUMATIC WORK SUPPORTS PNEUMATIC WORK SUPPORTS

 Open the catalog to page 5

WORK SUPPORTS WORK SUPPORTS COMPACT PNEUMATIC WORK SUPPORTS Provide high support capacity even with small body. Part Number Part Number imno corporator

 Open the catalog to page 6

WORK SUPPORTS WORK SUPPORTS Feature ■The piston can be locked/unlocked by air operation. ■This compact work support can be used as a support in surface mounter. 1. Load a workpiece on the support. 2. The piston strokes to fit the workpiece by the inner spring. 4. Apply air to the pneumatic port. 6. The piston is unlocked when the air is released. Side or bottom surface mounting is possible. Side Surface Mounting    Bottom Surface Mounting Performance Curve CAD Download : https://www.imao.biz/en imnocoRPORflTion

 Open the catalog to page 7

WORK SUPPORTS WORK SUPPORTS PNEUMATIC WORK SUPPORTS Part Number Part Number

 Open the catalog to page 8

WORK SUPPORTS WORK SUPPORTS Feature The piston can be locked/unlocked by air operation. ■Operating Instructions 1. Load a workpiece on the support. 2. The piston strokes to fit the workpiece by the inner spring. 3. Clamp the workpiece. 4. Apply air to the pneumatic port. 5. The piston is locked. 6. The piston is unlocked when the air pressure is released. ■Installation Instructions Can be mounted on both top surface and bottom surface of plate with hex-socket head cap screws. Mount on Bottom Surface of Plate Mount on Top Surface of Plate (For lower positioning of workpiece) Hex-Socket Head...

 Open the catalog to page 9

WORK SUPPORTS WORK SUPPORTS BJ371 PRECISION WORK SUPPORT imno corporator

 Open the catalog to page 10

WORK SUPPORTS WORK SUPPORTS Feature ・The piston can be locked/unlocked with one-touch operation and keeps stable support capacity. ・The displacement of the piston is not exceeding 3μm when it is locked. This helps keep the accuracy of the workpiece height. ・Can be used by remote control. ■Operating Instruction 2. Load a workpiece, and the piston lowers. 3. Lock the piston by turning the knob. ■Installation Instruction ■Application Example for Remote Control Tighten the M5 hex. socket head cap screw with a hex. wrench (Across Two Flats: 3). Components for remote control are not available...

 Open the catalog to page 11

WORK SUPPORTS WORK SUPPORTS BJ350 WORK SUPPORTS [BJ35q] (Ball-Thumb-Screw Style) Knurled Knob (pinned and glued) BJ750-N imno corporator

 Open the catalog to page 12

WORK SUPPORTS (Ball-Thumb-Screw Style) Screw Support Piston Spring Weight Torque(N・m) Capacity(kN) Force(N) (g) Part Number (Knurled-Knob Style) Screw Support Piston Spring Weight Torque(N・m) Capacity(kN) Force(N) (g) Part Number The positive locking mechanism allows the ball-thumb-screw style to offer high support capacities. When you attach a support tip to the tapped hole through the shaft, tighten the shaft and fix it to prevent damage. Ideal for preventing the workpiece from chatteri

 Open the catalog to page 13

WORK SUPPORTS WORK SUPPORTS CYLINDRICAL WORK SUPPORTS (Knurled-Knob Style) M2 Ball Thumb Screw BCF Piston SK95 steel S45C steel Quenched and tempered Black oxide finish Black oxide finish (Ball-Thumb-Screw Style) Knurled Knob (pinned and glued) Note: To install, insert a hex. wrench through the piston into the mounting screw. BJ351 (Ball-Thumb-Screw Style) (Knurled-Knob Style) Depth 12 Depth 16 Depth 20 Depth 24 Depth 32

 Open the catalog to page 14

WORK SUPPORTS Part Number COIL SPRINGS FOR CYLINDRICAL WORK SUPPORTSimno Body piston spring force lower. Part Number imno corporator

 Open the catalog to page 15

WORK SUPPORTS WORK SUPPORTS S45C steel Black oxide finish Part Number imno corporator

 Open the catalog to page 16

WORK SUPPORTS WORK SUPPORTS How To Use Cylindrical Work Supports BJ351 L3 *) Cylindrical Work Supports BJ351 Remote−Control Unit, Tall BJ650 Coupling Nut BJ744 Custom Block Knurled Knob BJ750-N Knurled Knob BJ750-N Remote−Control Unit, Tall BJ650 *) See dimension chart   in the previous page. Suitable for controling work supports from a distance. Note When used with a BJ650 Remote−Control Unit, a BJ350 or BJ351 Work Support can provide the support capacity as given in the catalog if the screw torque is fully applied by using a tool like wrench. If the screw torque is fully applied by...

 Open the catalog to page 17

WORK SUPPORTS WORK SUPPORTS WORK SUPPORTS WITH CAM HANDLE imno corporator

 Open the catalog to page 18

WORK SUPPORTS Part Number Part Number *)Allowable load to operate the handle ■ Operating Instruction ■Adjusting Handle Locking Position Support Tip imno corporator

 Open the catalog to page 19

WORK SUPPORTS WORK SUPPORTS BJ351-A HORIZONTAL WORK SUPPORTSimno Body Part Number Part Number imno corporator

 Open the catalog to page 20

WORK SUPPORTS WORK SUPPORTS Ideal for preventing the thin workpiece from chattering and deflecting. ■Operating Instruction 1. To set a workpiece with the piston retracted, Workpiece Piston Pull Knob Push Lightly Workpiece 1. Set the piston retracted by pulling the knob. The internal plunger allows retaining the piston at the retracted position. 2. Load the workpiece and then push the knob lightly to let the adjustable spindle contact the workpiece. Tighten the ball thumb screw to lock the piston. 2. To set a workpiece without retracting the piston, Contact Bolt (included) Workpiece...

 Open the catalog to page 21

All Imao Corporation catalogs and technical brochures

  1. SHR

    1 Pages

  2. HR-SP

    2 Pages

  3. SE-T

    1 Pages

  4. SE

    2 Pages

  5. HRE

    1 Pages

  6. HR-A,HR-B

    1 Pages

  7. HR / HRB

    2 Pages

  8. OTLK

    2 Pages

  9. BJ737-B

    1 Pages

  10. BJ736-C

    1 Pages

  11. BJ722

    1 Pages

  12. SRP,DRP

    1 Pages

  13. BUH

    2 Pages

  14. BJ733

    1 Pages

  15. QLSW-SH

    1 Pages

  16. QLSL

    2 Pages

  17. QLCA

    3 Pages

  18. CTK

    2 Pages

  19. OTLK-A

    1 Pages

  20. BJ724

    1 Pages

  21. BJ774-SUS

    2 Pages

  22. PED

    1 Pages

  23. BJ725

    1 Pages

  24. NKL

    1 Pages

  25. VISES

    13 Pages

  26. CP127

    2 Pages

  27. general catalog

    446 Pages

  28. CLAMPS

    92 Pages

  29. ONE-TOUCH CLAMPS

    76 Pages

  30. PNEUMATIC CLAMPS

    36 Pages

  31. HANDLES & KNOBS

    22 Pages