Value Creator Side Clamps

SPIRAL CAM CLAMPS ★Key Point - Space saving. Long clamping stroke. CP1351 (Without Clamping Plate) Part Number

■ The spiral cam provides quick and powerful clamping. ■ The simple design keeps cost low and the small size allows more workpieces per load. ■ Clamping Plate avoids marring workpiece surfaces. ■ Mounting Hole Dimension With Clamping Plate Without Clamping Plate Note: Dimension A and A+l are the recommended distances between the mounting hole and the end ofthe workpiece. CP135-P CLAMPING PLATES ReHST Stainless Part Number Clamping Plate imflo corporator

★ Key Point - [ Can clamp 2 workpieces in small space. ^ The wedge construction allows powerfully clamping the workpiece. Can hold two workpieces with equilateral clamping action by using a hex wrench. yi ( Horizontal pressure against workpiece ©Vertical pressure preventing workpiece lift

COMPACT SIDE CLAMPS Body Part Number Part Number How To Use Feature (Jaw moves obliquely downward) Drill a tapped hole and a locking-pin hole as specified below.

COMPACT LOW-PROFILE CAM EDGE CLAMPS Part Number

Designed to prevent part lift. ■ Low head cap screws do not project from the body. ■ Turning the cam with a hex wrench allows the cam to project thejawfor clamping. When the cam is turned back for unclamping, the loaded spring lets the jaw return to the original position. Ensure that mounting surfaces are finished to ^/(G.Sa) or better, without any scratches or dents.

LOW-PROFILE CAM EDGE CLAMPSimno Body Part Number Part Number

Feature 'HVLJQHGWRSUHYHQWSDUWOLIW LOW-PROFILE CAM EDGE CLAMPS 2QH7RXFKW\SHLVDYDLODEOH

COMPACT TOE CLAMPS RrmjJC w 11J M-For Socket-Head Cap Screw Part Number Part Number (Jaw moves obliquely downward) ( Horizontal pressureagainstworkpiece ©Vertical pressure preventing workpiece lift ■ Mounting-Hole Dimension t Locking-pin Drill a tapped hole and a locking-pin hole as specified below. CAD Download : https://www.imao.com/en/ imflocoRPORfluon

TOE CLAMPS Part Number Part Number Drill a tapped hole and a pin hole as specified on the above.

Related Product

CAM CLAMPS Cam / Locking Screw Part Number ■Allows loading and unloading a part faster. ■Compact design

CAM EDGE CLAMPS Body / Jaw Part Number Part Number Secure the body and the flanged collar with a socket head cap screw, and then turn the the cam with a wrench to clamp a workpiece. Related Product imflo corporator

SIDE CLAMPS Part Number Part Number Drill a tapped hole and a pin hole as specified on the above. imflo corporator

SIDE CLAMPS Smooth Nose M-For Hex. Socket Head Cap Screws Body/Sliding Nose Related Product

Value Creator

Compactfree vise that prevents lifting up ofthe part. CAD Download : https://www.imao.com/en/ IfTlAO CORPORfiTIOn

Performance Curve わ $ VFUHZW\SHFODPSLQJPHFKDQLVPSURYLGHV ORQJFODPSLQJVWURNHDQGILUPFODPSLQJ わ3UHFLVLRQJURXQGMDZLVSHUIHFWIRUFODPSLQJ WKHZRUNSLHFHRQLWVILQLVKHGVXUIDFH わ,QFODPSLQJWKHMDZSURYLGHVGRZQZDUGIRUFH WRSUHYHQWSDUWOLIW わ7KHORFNLQJVFUHZPXVWEH VFUHZHGRQWRWKHKH[VRFNHWKHDGFDS VFUHZWRSUHYHQWWKHERG\VOLGLQJ EDFNZDUGVZKHQFODPSLQJ

SIDE CLAMPS RrmjJC w 11J CAD Download : https://www.imao.com/en/ imflocoRPORfluon

Part Number Part Number Clamping Allowable Screw Weight Force(kN) Torque(N・m) (kg) Proper Jaws Fixture Plate Smaller clamping space allows clamping a larger workpiece. Hex. Socket Head Cap Screw Hex. Socket-Head Setscrew The hex. socket-head setscrew works to prevent the clamp from sliding back if screwed in until it contacts the cap screw. Align each surface *) CP100-08040 : Hex. Socket-Head Cap Screw M4×0.7-6L CP100-10050 : Hex. Socket-Low-Head Cap Screw M6×1-10L CP100-12060 : Hex. Socket-Low-Head Cap Screw M8×1.25-12L CP100-16080 : Hex. Socket-Low-Head Cap Screw M10×1.5-16L Edge Grippers HSE-SS...

SIDE CLAMPS S45C steel SKH51 steel S45C steel Quenched and tempered Quenched and tempered Black oxide finish Black oxide finish Black oxide finish

Part Number Part Number Clamping Allowable Screw Weight Force(kN) Torque(N・m) (kg) Proper Jaws The hex． socket−head setscrew works to prevent the clamp from sliding back if screwed in until it contacts the cap screw． Align each surface *)Hex. Socket-Head Cap Screw *) CP101-08040 : Hex. Socket-Head Cap Screw M4×0.7-6L CP101-10050 : Hex. Socket-Low-Head Cap Screw M6×1-10L CP101-12060 : Hex. Socket-Low-Head Cap Screw M8×1.25-12L CP101-16080 : Hex. Socket-Low-Head Cap Screw M10×1.5-16L Edge Grippers HSE-SS Jaw is replaceable. For installing, use a hex. socket-head cap screw. Fit the jaw onto a pocket...

CP102 WIDE-JAW SIDE CLAMPSimno Body Part Number Align each surface Part Number *) CP102-08040 : Hex. Socket-Head Cap Screw M4X0.7-6L CP102-10050 : Hex. Socket-Low-Head Cap Screw M6X1-10L CP102-12060 : Hex. Socket-Low-Head Cap Screw M8X1.25-12L Jaw is replaceable. For installing, use a hex. socket-head cap screw. Fit the jaw onto a pocket of the side clamp arm.

www.imao.com/en 2002 Senbiki, Seki, Gifu 501-3954, Japan Tel : +81 575 28 5823