Quick Shaft Clamps
14Pages

{{requestButtons}}

Catalog excerpts

Quick Shaft Clamps - 1

Quick Shaft Clamps

Open the catalog to page 1
Quick Shaft Clamps - 2

ONE-TOUCH SPINDLE LOCKS QUICK SHAFT-LOCKING CLAMPS QUICK SHAFT-LOCKING CLAMPS (Pneumatic) PNEUMATIC SHAFTLOCKING CLAMPS PNEUMATIC SHAFTLOCKING CLAMPS

Open the catalog to page 2
Quick Shaft Clamps - 4

ONE-TOUCH SPINDLE LOCKS Clamp Collar Polyamide Polyamide (glass-fiber reinforced) (glass-fiber reinforced) SCS13 stainless steel Black (Equivalent to SUS304) QCSPL-BK QCSPL-S Locking Position (Plastic knob,Orange) (Plastic knob,Black) Unlocking Position 25 P1 φ6 for Mounting of Position Indicators M1 for Socket-Head Cap Screws (Use with the flat washers provided for mounting) (Metal knob) ★Key Point Secure locking of spindles with one-touch action! Plastic Knob Part Number Orange 8 (Width of Clamp Collar) Metal Knob Weight Weight d W Part Number (g) (g) *) Using shafts with tolerances other...

Open the catalog to page 4
Quick Shaft Clamps - 5

Feature ・One-touch Spindle Locks enable quick and secure locking of shafts with one click of the knob. ・When One-touch Spindle Lock is operated, the knob clicks and the shaft is locked with a steady force. This provides reliable locking of shafts. ・The knob position and the indication line clearly indicate lock/unlock position. ■Conventional Method ■One-Touch Spindle Locks Just turn the knob. The indication line aligns when One-touch Spindle Lock is locked. For locking of sliding shaft Can be used with Position Indicator Suitable position indicators Note: To mount position indicators to...

Open the catalog to page 5
Quick Shaft Clamps - 6

QUICK SHAFT-LOCKING CLAMPS L L2 2-d1 For Hex. Socket-Head Cap Screws (Both Sides) Body / Handle Locking Block Die cast zinc CAC402 Chrome plated finish cast bronze Part Number Part Number Flat Spring SUS304 stainless steel

Open the catalog to page 6
Quick Shaft Clamps - 7

Supplied With Four hex. socket setscrews How To Use ・As the handle is turned down, it pushes the locking block toward the shaft for clamping. When the handle is released, the flat spring allows the locking block to be returned to the original position. ・Both faces can be used for installation. Two sides with two tapped holes can also be used for installation(remove the setscrews). ・Designed to positively lock a lead screw or slide shaft with ease. ・Ideal especially in applications where position adjustments are often made, due to better workability than conventional holding methods using...

Open the catalog to page 7
Quick Shaft Clamps - 8

QUICK SHAFT-LOCKING CLAMPS (Pneumatic) 2-For d1 Cap Screw (Both Sides) R1/8 Tapered Thread Body / Cover Plate Clamping by spring pressure / Unclamping by air pressure Part Number Part Number A5052 aluminum alloy Sand blasting finish Anodized Natural ★One Point Nitrile rubber Holding Torque Sliding Load Weight N・m N g

Open the catalog to page 8
Quick Shaft Clamps - 9

■How to Install Shaft Mounting Holes Air Threaded Plug Slide the clamp over the shaft at the Screwing the plug completely unclamped mode, and then fix the into the hole allows locking body using the 2 mounting holes. the shaft. Supplying air allows compressing the spring to get the shaft unlocked. Feature ・Air pressure to be applied : 0.5 - 0.7MPa Recommended to use with a three-way valve. ・The mechanism of spring-pressure clamping and air-pressure unclamping prevents shaft-locking force from getting lowered. ・Connecting air plumbing to multiple Quick Shaft-Locking Clamps installed allows...

Open the catalog to page 9
Quick Shaft Clamps - 10

PNEUMATIC SHAFT-LOCKING CLAMPS ★Key Point Single Acting For automation of shaft locking Body Clamping Shaft A5052 aluminum A5052 aluminum Anodized SUS304 stainless steel Anodized Natural For 2-M Hex-Socket Head Cap Screw Part Number

Open the catalog to page 10
Quick Shaft Clamps - 11

Application Example ・Spring clamping and pneumatic unclamping mechanism prevents the decrease of clamping force by air leakage. ・Available for remote and multiple operations. ・Perfect for use in limited space. ・Can be easily mounted with screws. ・Three-way valve is recommended. ・This product can not be used as a bearing or a guide for shaft. Sliding shaft locking Lock for position adjustment PNEUMATIC SHAFT-LOCKING CLAMPS PSLC12-5L ・Clamping/unclamping operation should be done when the shaft stops. Can not be used as a brake of moving shaft. ・Do not force to move the clamped shaft. ・Do not...

Open the catalog to page 11
Quick Shaft Clamps - 12

PNEUMATIC SHAFT-LOCKING CLAMPS ★Key Point For automation of shaft locking Body Clamping Shaft A5052 aluminum A5052 aluminum S45C steel Anodized Anodized Electroless nickel plated Natural (Single Acting) For 2-M Hex-Socket Head Cap Screw Pneumatic Port *) Manual Unclamping Hole *) A setscrew is attached when shipping. For details, please refer to the features. Part Number **) Recommended shaft: Heat treated (over HRC50) or hard chrome plated (over HV750, over 10μm thickness) CAD Download : htt

Open the catalog to page 12
Quick Shaft Clamps - 13

Supplied With ・Spring clamping and pneumatic unclamping mechanism prevents the decrease of clamping force by air leakage. ・Available for remote and multiple operations. ・Can be easily mounted with screws. ・Can be unclamped manually. The clamp can be released without air by tightening the setscrew fully into the manual unclamping hole. ・A setscrew is attached to pneumatic port when shipping. Remove the setscrew before air supply. Application Example ・Three-way valve is recommended. ・This product can not be used as a bearing or a guide for shaft. Sliding shaft locking Vertical lock for...

Open the catalog to page 13
Quick Shaft Clamps - 14

www.imao.com/en 2002 Senbiki, Seki, Gifu 501-3954, Japan Tel : +81 575 28 5823

Open the catalog to page 14

All Imao Corporation catalogs and technical brochures

  1. Spring Clamps

    23 Pages

  2. Side Clamps

    27 Pages

  3. Flex Locators

    38 Pages

  4. WORK SUPPORTS

    24 Pages

  5. TENSIONERS

    40 Pages

  6. CLAMPS

    106 Pages

  7. SCREWS & NUTS

    13 Pages

  8. CLAMPING KNOBS

    23 Pages

  9. LOCATING PARTS

    14 Pages

  10. GRIPPERS

    19 Pages