QLCL
2Pages

{{requestButtons}}

Catalog excerpts

QLCL - 1

★Key Point Easy clamping and unclamping. Handle clicks at clamping end. SCM440 steel S45C steel Quenched and tempered Quenched and tempered Electroless nickel plated Electroless nickel plated Stud SCM435 steel Quenched and tempered Electroless nickel plated Groove for adjustment of Groove operating position handle for adjustment of handle operating position Hex. Socket Setscrew Hex. Socket Setscrew M4×0.7-4L M4×0.7-4L Section X-X Section X-X (Tapped) (Tapped) (Stud) (Stud) Clamping Stroke Advance Stroke Type QLCL-NP Type QLCL-NP Clamping Clamping Stroke Stroke 40° 40° (Advance Throw) (Advance Throw) Allowable Operating Clamping Force Clamping Load (N) (kN) Mechani

Open the catalog to page 1
QLCL - 2

QLCL-NP Tapped QLCL-NP Stud Part Number Part Number ・ its unique cam design, the handle By clicks at clamping end. ・ ompared to conventional cam handles, this C product has higher resistance against vibration. ・ he handle position of Stud-type Cam Handles T can be set to a desired direction. ■Application Example Brass Pad Hex. Socket Setscrew Use a brass pad and a hex. socket setscrew included to fix the handle. Note: op surface of washer and flats at the cam T end should align at the clamping position. ■Mounting Stud-type Cam Handles 1. ix the stud to the handle with a brass F pad and a...

Open the catalog to page 2

All Imao Corporation catalogs and technical brochures

  1. Side Clamps

    27 Pages

  2. Flex Locators

    38 Pages

  3. WORK SUPPORTS

    24 Pages

  4. TENSIONERS

    40 Pages

  5. CLAMPS

    106 Pages

  6. Spring Clamps

    22 Pages

  7. SCREWS & NUTS

    13 Pages

  8. CLAMPING KNOBS

    23 Pages

  9. LOCATING PARTS

    14 Pages

  10. GRIPPERS

    19 Pages