PNEUMATIC CLAMPING LOCATORS imflo corporator

Value Creator

PNEUMATIC CLAMPING MODULES ★Key Point -v High clamping force by spring-loaded mechanical lock. Part Number Part Number **) Exceeding the holding force will result in product failure.This value does not include a safety factor. HowTo Install PNEUMATIC CLAMPING MODULES lAMWFH-Ml CLAMPING PINS

Single acting and spring clamping module. Supply air for unclamping, release for clamping. Supplying air allows the tapered piston to rise. The balls become loose and the clamping pin is released. Releasing air allows the spring to push down the tapered piston. The balls pushed by the piston pull down the clamping pin. Keeps clamping without air supply. Block Plug This module has 2 pneumatic ports for unclamping. Attach the furnished block plug to the unused port. HowTo Use■Clamping Pin Use accurate clamping pins for locating. Note: Use accurate clamping pins for 2 places and standard ones for...

CLAMPING PINS AMWFH-M-L SCM435 steel Quenched and tempered Electroless nickel plated HowTo Install PNEUMATIC CLAMPING MODULES AMWFH-SlPNEUMATIC CLAMPING MODULES

Part Number ■Clamping Pins ■ Machining Accuracy AMWFH-M-LlAccurate Clamping Pins Part Number

PNEUMATIC CLAMPING LOCATORSWedge (Direct Style) Part Number Part Number AMWF-BUl LOCATING RECEIVERS This value does not include a safety factor. Related Product ■HowTo Install PNEUMATIC FLEX LOCATORS -Use clean air by removing moisture and debris with ■HowTo Use PNEUMATIC FLEX LOCATORS an air dryer and air filter. ■ Impurities in the compressed air can cause malfunction.

LOCATING RECEIVERS R/mUC S45C steel Electroless nickel plated Part Number ■HowTo Install PNEUMATIC FLEX LOCATORS lAMWF-L-SlPNEUMATIC CLAMPING LOCATORS ■HowTo Use PNEUMATIC FLEX LOCATORS Release air for clamping. The tapered piston goes down and pushes the balls to pull down the receiver. Can keep clamped without air supply. The wedge goes up and releases the balls. Quick clamping and unclamping reduce set-up time in production equipment. Locating Repeatability: ±10 ju.m The receiver is centered and clamped when the 3 balls are pushed out to gain high locating repeatability.

■ Mounting Hole Dimensions ■Pneumatic Clamping Locators Part Number

The locators should be mounted in the direction shown in the above figures. For easier removal, insert screws into the tapped holes and screw them. ■ How to Remove (Locating Receivers) For easier removal, insert screws into the tapped holes and screw them. / Note Size ■ If the total weight exceeds the maximum loading weight, the locating repeatability may exceed ±10jum. ■ In vertical use, the locating repeatability may exceed ±10 ju,m. ■ Pneumatic Clamping Locators and Locating Receivers should be positioned equally against the center of the fixture plate. ■ For Port Style Locators, use with...

PNEUMATIC CLAMPING MODULES ★Key Point-v Work as quick change & form holding system. Supplied With ■ Do not plug the turbo port as it functions as an air vent even when not using turbo function. Mounting a filter prevents contamination. ■ If seating confirmation by monitoring air flow is required, internal air supply must be provided. The detection switch and related components should be prepared by the customer. ■ Use clean air by removing moisture and debris with an air dryer and air filter. ■Impurities in the compressed air can cause malfunction. ■8 of plastic mounting hole caps ■1 of plastic...

■This module clamps the plate with spring force, and can be boosted by supplying air to the turbo port. Supplying air to the unclamping port opens the module, and releasing air allows the spring to hold the clamping pin for clamping. ■Available with either external threaded connection or internal connection. Supplying air raises the tapered piston, releasing the pressure on the balls and unclamping the clamping pin. ■This module works as a form holding clamp for O.D. clamping or I.D. clamping by mounting optional jaws. Diamond pins are not required for rotational positioning when using multiple...

Blow-out Function ■ Mounting Hole Cap ■Keep the top surface of the module clean by inserting the plastic cap into the mounting hole. Replace the installed plug with the supplied orifice plug to enable air blow at the clamp pin insertion hole. ■ Place the mounting hole cap over the socket-head -Insert a pointed tool into cap screw hole and tap it in using a plastic hammer, the cap to remove it. ■When tapping, always place a piece of soft metal between the hammer and the plastic cap. *) Exceeding the holding force will result in product or screw failure. This value does not include a safety factor.Measured...

Prepare channel holes for turbo, unclamping, and (if needed) seating check in the base plate. Each channel should connect to a vertical hole with a diameter of 0 2-4. Part Number Note: The depth is set as the minimum to avoid interference with the Mi tapped holes. Make sure the channel is placed at this depth or deeper. The hole depths for the unclamping and turbo sides can be reversed if needed. ■The depth of vertical holes (02-4) should be h2. ■Make sure to set different depths for the turbo and unclamping channels to avoid interference. ■Use one air supply port each for turbo and unclamping,...

CLAMPING PINS Part Number Locating Reference Rotational ^__^ Locating Reference Rounci\ Clamping \Rotational Reference Clamping Diamond

■ Mounting Hole Dimension ■ Spacing Tolerance Should be ±0.02 for Type T and D Locating Pins. The required tolerance for Type S non-locating Clamping Pin is ±0.1. Note: The tolerance of di for Type S non-locating Clamping Pin is'o'1. The screws should be prepared by the customer. The length of screw differs by the thickness of fixture plate.

PNEUMATIC CLAMPING LOCATORS (Tapered Type) 4-M For Socket-Head Cap Screws Iamwf-w-sI (Straight Type) Reference ■HowTo Use PNEUMATIC FLEX LOCATORS ■HowTo Install PNEUMATIC FLEX LOCATORS ■ Use clean air by removing moisture and debris with an air dryer and air filter. ■Impurities in the compressed air can cause malfunction.