Pneumatic Clamping Fasteners

PNEUMATIC PIN HOLDING CLAMP Part No. PPHC-S PNEUMATIC BALLLOCKING CLAMPS Part No. PBLC PNEUMATIC PIN HOLDING CLAMP Part No. PPHC-D BALL-LOCK RECEPTACLE Part No. PBLC-M CLAMPING PIN Part No. QCPC-M PNEUMATIC ID HOLDING CLAMP Part No. PIDHC

Value Creator

PNEUMATIC PIN HOLDING CLAMPimno Wedge ★ Key Point -, [ Compact pull down clamp Part Number *) The clamping force above is at 0.5 MPa. QCPC-M CAD Download : https://www.imao.com/en/ Note ■ Use clean air by removing moisture and debris with an air dryer and air filter. ■Impurities in the compressed air can cause malfunction.

Performance Curve Clamping Pin Ball Clamping Force Piston ・The piston goes up by air supply and the balls move toward the center to pull down the clamping pin. ・The wedge clamping prevents the plate from lifting up. Clamping Force / Holding Force (N) Holding Force Application Example Transfer between multiple processes CLAMPING PIN QCPC0625-M4-SUS PNEUMATIC PIN HOLDING CLAMP PPHC0621S-SUS ■Hole Preparation ■Machining Accuracy Spacing tolerance for multiple use should be ±0.1. Repeatability is ±0.2. For higher accurate locating, use locating pins.

PNEUMATIC PIN HOLDING CLAMP Stainless ★ Key Point - [^Double-acting pull down clamp Part Number *) The clamping force above is at 0.5 MPa. **) Inner spring provides clamping without air supply. Supplied With 2 of socket-head cap screws(stainless steel), M3X0.5-28L / Note ■ Use clean air by removing moisture and debris with an air dryer and air filter. ■ Impurities in the compressed air can cause malfunction.

Feature Plate Ball Spring Clamping Force Air Supply （Unclamping Port) Air Supply （Clamping Port） Clamping Force / Holding Force (N) Performance Curve Holding Force ・The piston goes up by air supply from clamping port and the balls move toward the center to pull down the clamping pin. ・The wedge clamping prevents the plate from lifting up. ・Inner spring keeps clamping without air supply. Clamping Force 〈Without Air〉 Clamping Force Holding Force （N） （N） Application Example Simultaneous removal of multiple attachments PNEUMATIC PIN HOLDING CLAMP PPHC0623D-SUS ■Hole Preparation X Screw 12 (customer...

QCPC-M Stainless SUS630 stainless steel Precipitation hardened Part Number Note: Spacing tolerance for multiple use should be ±0.1. Refer to the product pages of clamps for repeatability. Color difference by the hardening treatment does not affect function or quality of the product. M4X0.7 CAD Download : https://www.imao.com/en/ imflo corporator

Value Creator

PNEUMATIC BALL-LOCKING CLAMPS PBLC1023S-SUS (Spring Clamping/Single Acting) (Pneumatic Clamping/Single Acting) ★ Key Point- Two clamping types are available. Part Number / Note ■|PBLC1023S-SUS| has an identifying line and |PBLC1023A-SUS1 does not. ■ Use clean air by removing moisture and debris with an air dryer and air filter. ■ Impurities in the compressed air can cause malfunction.

Feature PBLC1023S-SUS (Spring Clamping) We dge An gle θ PBLC1023A-SUS (Pneumatic Clamping) Wedg Plate e Ang leθ Receptacle Shaft Clamping Force Clamping Force ・The shaft pushes out the balls onto the tapered surface of the receptacle to pull down the plate. ・The wedge clamping prevents the plate from lifting up. ・Spring clamping type can keep clamping without air supply. Performance Curve (Spring Clamping) Clamping Force Holding Force （N） （N） Clamping Force / Holding Force (N) (Pneumatic Clamping) Holding Force Clamping Force Application Example Simultaneous removal of holders BALL-LOCK RECEPTACLE...

■ Machining Accuracy Spacing tolerance for multiple use should be ±0.1. For higher accurate locating, use locating pins.

SUS630 stainless steel Precipitation hardened Part Number ^Note: Spacing tolerance for multiple use should be ±0.1. Refer to the product pages of clamps for repeatability. Color difference by the hardening treatment does not affect function or quality of the product. Plate thickness: 6mm to 10mm Plate thickness: over 10mm Nut (Stainless Steel) CAD Download : https://www.imao.com/en/

PIDHC Stainless Steel . PNEUMATIC ID HOLDING CLAMP (Double Acting) Part Number **) The holding force above is with 0.5 MPa air pressure and SUS304 (surface roughness Ra1.6) workpiece. Supplied With Note 2 of socket-head cap screws(stainless steel), M4X0.7-35L ■ Color difference by the hardening treatment does not affect function or quality of the product. ■ Use clean air by removing moisture and debris with an air dryer and air filter. ■ Impurities in the compressed air can cause malfunction.

Feature Pulling Shaft pi ^ Air Supply (Unclamping) ■ The pulling shaft goes down by air supply from clamping port and the jaws expand to hold the workpiece. ■The clamp makes a line contact with the workpiece at 3 places. Performance Curve Application Example ■ Hole Preparation With M4 Socket-Head Cap Screws (supplied) With M5 Low-Head Cap Screws (customer supplied) (Dimension: head dia. 8.5, head height 3.5) ■ Repeatability Estimated repeatability is ±0.2 (clamping dia.0 20, without any load)