ONE-TOUCH SLIDING LOCKS - 24 Pages

Add to MyDirectIndustry favorites
ONE-TOUCH SLIDING LOCKS

Catalog excerpts

ONE-TOUCH SLIDING LOCKS ONE-TOUCH SLIDING LOCKS LINEAR-MOTION STOPPERS ONE-TOUCH SPINDLE LOCKS QUICK SHAFT-LOCKING CLAMPS

 Open the catalog to page 1

ONE-TOUCH LINEAR-MOTION ONE-TOUCH QUICK SHAFT-LOCKING SLIDING LOCKS STOPPERS SPINDLE LOCKS CLAMPS ONE-TOUCH SLIDING LOCKS ONE-TOUCH SLIDING LOCKS ONE-TOUCH SLIDING LOCKS SLIDING LOCKS FOR SLOTTED HOLE RISER PLATES FOR SLIDING LOCK SLIDING LOCKS FOR SQUARE BAR SLIDING LOCKS FOR SQUARE BAR WITH HANDLE RISER PLATES FOR SLIDING LOCK LINEARMOTION STOPPERS LINEAR-MOTION STOPPERS Part No. LSM

 Open the catalog to page 2

ONE-TOUCH SLIDING LOCKS ONE-TOUCH LINEAR-MOTION ONE-TOUCH QUICK SHAFT-LOCKING SLIDING LOCKS STOPPERS SPINDLE LOCKS CLAMPS ONE-TOUCH SPINDLE LOCKS ONE-TOUCH SPINDLE LOCKS Part No. QCSPL QUICK SHAFTLOCKING CLAMPS QUICK SHAFT-LOCKING CLAMPS (Pneumatic) QUICK SHAFT-LOCKING CLAMPS

 Open the catalog to page 3

ONE-TOUCH SLIDING LOCKS ONE-TOUCH LINEAR-MOTION ONE-TOUCH QUICK SHAFT-LOCKING SLIDING LOCKS STOPPERS SPINDLE LOCKS CLAMPS ONE-TOUCH SLIDING LOCKS New solution for sliding adjustment! ONE-TOUCH SLIDING LOCKS One-touch Sliding Lock is a fixing component that enables easy & secure locking in sliding adjustment. This dramatically improves reliability and safety in set-ups of various devices. Conventional Method IMAO Method Squeeze Click Required to tighten by main force to prevent misalignment. Prevents misalignment with easy operation!

 Open the catalog to page 4

ONE-TOUCH SLIDING LOCKS ONE-TOUCH LINEAR-MOTION ONE-TOUCH QUICK SHAFT-LOCKING SLIDING LOCKS STOPPERS SPINDLE LOCKS CLAMPS High Visibility Easy-to-read ON/OFF position Leveling of Operation The knob clicks when it is locked/unlocked. Sliding Locks for Slotted Hole Secure Locking Secure locking with wedge structure. Sliding Locks for Square Bar Can be used with commercially-available square bars Knob is available in plastic or metal. Plastic knob is available in black or orange. Metal knob is resistant to damage. Handle is accessible from the side even in tight space. For Adjusting Camera...

 Open the catalog to page 5

SLIDING LOCKS FOR SLOTTED HOLE Type (Plastic Knob,Black) iQCSL-OGl (Plastic Knob, Orange) imno corporator

 Open the catalog to page 6

ONE-TOUCH SLIDING LOCKS ONE-TOUCH LINEAR-MOTION ONE-TOUCH QUICK SHAFT-LOCKING SLIDING LOCKS STOPPERS SPINDLE LOCKS CLAMPS The slide is locked when the knob is at “ON” position. ■Usage Instructions * Refer to the “Note” for safety use. 1. Slide the steel bar. 3. Slide the Sliding Locks For Slotted Hole. 4. Attach/remove the Sliding Locks For Slotted Hole. Thickness Reference : QCSLSP “How To Use” 6.3 ・Usable Materials: Flat bar (JIS h14 grade) made of SS400, S45C or SUS304 etc. ・Machining of slotted hole: Recommended tolerance of the slotted hole to prevent chattering is shown as below. For...

 Open the catalog to page 7

ONE-TOUCH LINEAR-MOTION ONE-TOUCH QUICK SHAFT-LOCKING SLIDING LOCKS STOPPERS SPINDLE LOCKS CLAMPS ONE-TOUCH SLIDING LOCKS Performance Curve ■The displacement of steel bar by axial load (Static load from single direction) 1.0 Note: The above data is for a flat bar made of SUS304 stainless steel, SS400 steel and S45C steel. Using an aluminum flat bar, the surface will be scratched or dent by applied load. Technical Information ・Heat resistance : Up to 90℃ ・Rated load : Up to 500N Note The following conditions may cause displacement increasing or misalignment. 1. Use under slippage or...

 Open the catalog to page 8

ONE-TOUCH SLIDING LOCKS RISER PLATES FOR SLIDING LOCK Body SUS304 stainless steel Part Number

 Open the catalog to page 9

SLIDING LOCKS FOR SQUARE BAR Type (Plastic Knob,Black) : The shafts are locked being pushed into the wedged spaces when sliding load is applied in horizontal direction. Locking Force Load Size imno corporator

 Open the catalog to page 10

ONE-TOUCH SLIDING LOCKS ONE-TOUCH SLIDING LOCKS LINEAR-MOTION ONE-TOUCH QUICK SHAFT-LOCK! STOPPERS SPINDLE LOCKS The handle is accessible from the side even in tight spaces. Part Number Continuing on Next Page imno corporator

 Open the catalog to page 11

ONE-TOUCH SLIDING LOCKS ONE-TOUCH LINEAR-MOTION ONE-TOUCH QUICK SHAFT-LOCKING SLIDING LOCKS STOPPERS SPINDLE LOCKS CLAMPS Performance Curve ■The displacement of steel bar by axial load (Static load from single direction) A A: QCSQ 1212,1616 B: QCSQ 2509,2512 QCSQ 3212,3216 Note: The above data is for a flat bar made of SUS304 stainless steel, SS400 steel and S45C steel. Using an aluminum flat bar, the surface will be scratched or dent by applied load. Technical Information ・Heat resistance : Up to 90℃ ・Rated load : QCSQ 1212,1616 : 500N QCSQ 2509,2512,3212,3216 : Up to 800N Note The...

 Open the catalog to page 13

Riser Plate ■ How to Use Tapped Holes on Side Surface Can be used with attachments such as pointer plates and brackets. Note: Screw depth must be 6mm or less. ■ How to Use Scale Plate ■Scale plate can be put on the steel bar. Note: Fit scale plate inside the slot in the figure below. Putting scale plate outside the slot cause interference between scale plate and Sliding Lock, and this may cause failure. ■ |ES1N|Scale Plate is separately available.

 Open the catalog to page 14

ONE-TOUCH SLIDING LOCKS ONE-TOUCH SLIDING LOCKS I ONE-TOUCH | SPINDLE LOCKS I QUICK SHAFT-LOCKING I | CLAMPS | Value Creator imno corporator

 Open the catalog to page 15

How To Use Note ■Unless the handle is turned to the clamping position, the engineered full clamping force can not be distributed. When the friction factor is extremely small due to oil or the like applied on the linear rail, the holding force can decrease. When a heavy impact load is applied, slippage can occur due to impact strength. Feature ■ Locks positively through simple operation. ■ Always provides constant clamping force due to clamping with built-in spring. ■ Can be operated in tight areas as shown below, due to no need of space for handle swivel. ■ The handle can be changed in...

 Open the catalog to page 17

QCSPL-oG (Plastic knob,Orange) *j 06 for Mounting of Position Indicators QCSPL-sI (Metal knob) ★Key Point- Secure locking of spindles with one-touch action! 8 (Width of Clamp Collar) Plastic Knob *) Using shafts with tolerances other than h7 may decrease the allowable holding torque or allowable sliding load. Supplied With 2 of Flat round washer(Stainless Steel) imno corporator

 Open the catalog to page 18

All Imao Corporation catalogs and technical brochures

  1. SHR

    1 Pages

  2. HR-SP

    2 Pages

  3. SE-T

    1 Pages

  4. SE

    2 Pages

  5. HRE

    1 Pages

  6. HR-A,HR-B

    1 Pages

  7. HR / HRB

    2 Pages

  8. OTLK

    2 Pages

  9. BJ737-B

    1 Pages

  10. BJ736-C

    1 Pages

  11. BJ722

    1 Pages

  12. SRP,DRP

    1 Pages

  13. BUH

    2 Pages

  14. BJ733

    1 Pages

  15. QLSW-SH

    1 Pages

  16. QLSL

    2 Pages

  17. QLCA

    3 Pages

  18. CTK

    2 Pages

  19. OTLK-A

    1 Pages

  20. BJ724

    1 Pages

  21. BJ774-SUS

    2 Pages

  22. PED

    1 Pages

  23. BJ725

    1 Pages

  24. NKL

    1 Pages

  25. VISES

    13 Pages

  26. CP127

    2 Pages

  27. general catalog

    446 Pages

  28. WORK SUPPORTS

    24 Pages

  29. CLAMPS

    92 Pages

  30. ONE-TOUCH CLAMPS

    76 Pages

  31. PNEUMATIC CLAMPS

    36 Pages

  32. HANDLES & KNOBS

    22 Pages