Catalog excerpts
Sliding Locks
Open the catalog to page 1SLIDING LOCKS FOR SLOTTED HOLE RISER PLATES FOR SLIDING LOCK SLIDING LOCKS FOR SQUARE BAR SLIDING LOCKS FOR SQUARE BAR WITH HANDLE RISER PLATES FOR SLIDING LOCK ONE TOUCH PUSH LOCK CLAMPS SHAFT COLLARS ONE-TOUCH INDEXING CLAMPS ONE-TOUCH INDEXING CLAMPS TAPERED BUSHINGS ONE-TOUCH LOCKING KNOBS POINTER PLATE
Open the catalog to page 2ONE-TOUCH SLIDING LOCKS New solution for sliding adjustment! ONE-TOUCH SLIDING LOCKS One-touch Sliding Lock is a fixing component that enables easy & secure locking in sliding adjustment. This dramatically improves reliability and safety in set-ups of various devices. Conventional Method IMAO Method Squeeze Click Required to tighten by main force to prevent misalignment. CAD Download : https://www.imao.com/en/ Prevents misalignment with easy operation!
Open the catalog to page 4High Visibility Easy-to-read ON/OFF position Leveling of Operation The knob clicks when it is locked/unlocked. Sliding Locks for Slotted Hole Secure Locking Secure locking with wedge structure. Sliding Locks for Square Bar Can be used with commercially-available square bars Knob is available in plastic or metal. Plastic knob is available in black or orange. Metal knob is resistant to damage. Handle is accessible from the side even in tight space. For Adjusting Camera Position For Adjusting Stamp Base Position Sliding Locks For Slotted Hole QCSL For Adjusting Workpiece Guide Sliding Locks...
Open the catalog to page 5SLIDING LOCKS FOR SLOTTED HOLE Type QCSL-OG QCSL-BK Shafts / Wedge Ball Plunger Polyamide Die-cast zinc (glass-fiber reinforced) Stainless steel Chrome plated SCS13 stainless steel (Plastic Knob,Orange) (Plastic Knob,Black) 2-Plunger EBPSJ4 (For smooth sliding when unlocked) ■Locking Mechanism The shafts are locked being pushed into the wedged spaces when sliding load is applied in horizontal direction. Wedge Angle Locking Force Load QCSL-OG (Plastic Knob, Orange) QCSL-BK (Plastic Knob, Black) QCSL-S (Metal Knob) Part Number Part Number Part Number
Open the catalog to page 6The slide is locked when the knob is at “ON” position. ■Usage Instructions * Refer to the “Note” for safety use. 1. Slide the steel bar. 3. Slide the Sliding Locks For Slotted Hole. 4. Attach/remove the Sliding Locks For Slotted Hole. Thickness Reference : QCSLSP “How To Use” 6.3 ・Usable Materials: Flat bar (JIS h14 grade) made of SS400, S45C or SUS304 etc. ・Machining of slotted hole: Recommended tolerance of the slotted hole to prevent chattering is shown as below. For more accurate sliding, machine the slotted hole to fit the dimension of 10mm(-0.05 to 0) on the bottom of Sliding Locks....
Open the catalog to page 7Performance Curve ■The displacement of steel bar by axial load (Static load from single direction) 1.0 Note: The above data is for a flat bar made of SUS304 stainless steel, SS400 steel and S45C steel. Using an aluminum flat bar, the surface will be scratched or dent by applied load. Technical Information ・Heat resistance : Up to 90℃ ・Rated load : Up to 500N Note The following conditions may cause displacement increasing or misalignment. 1. Use under slippage or chattering caused by vertical or horizontal loads 2. Use with a clearance between the steel bar and the base when the Sliding...
Open the catalog to page 8RISER PLATES FOR SLIDING LOCK Body SUS304 stainless steel Part Number ■How to Use Riser Plate Can be used for various steel thicknesses by attaching the Riser Plates (to be ordered separately). Riser Plate Part No. Thickness of Steel of Riser Plates Bar(h14)mm ■How to Use Scale Plate ・You can read the scale with the line on the body of Sliding Lock. ・ ES1N Scale Plate is separately available. Reading Line for Scale (on each side)
Open the catalog to page 9SLIDING LOCKS FOR SQUARE BAR Type Shafts / Wedge Flat Spring Polyamide QCSQ-OG QCSQ-BK Die-cast zinc (glass-fiber reinforced) C519P Stainless steel phosphor bronze Chrome plated SCS13 stainless steel QCSQ-S (Equivalent to SUS304) (Plastic Knob,Orange) (Plastic Knob,Black) Flat Spring (For smooth sliding when unlocked) (Metal Knob) ■Locking Mechanism The shafts are locked being pushed into the wedged spaces when sliding load is applied in horizontal direction. Wedge Angle Locking Force Load OFF Position QCSQ-OG QCSQ-BK QCSQ-S
Open the catalog to page 10QCSQ-BK (Plastic Knob, Black) QCSQ-OG (Plastic Knob, Orange) QCSQ-S (Metal Knob) Part Number Part Number Part Number SLIDING LOCKS FOR SQUARE BAR WITH HANDLE Body Shafts / Wedge Flat Spring Die-cast zinc SCS13 stainless steel Stainless steel C519P phosphor bronze Chrome plated (Equivalent to SUS304) ★Key Point Part Number The handle is accessible from the side even in tight spaces. Continuing on Next Page CAD
Open the catalog to page 11■Operating Instructions The slide is locked when the knob is at “ON” position. ■Usage Instructions * Refer to the “Note” for safety use. 2. Slide the Sliding Locks For Square Bar. ■Steel Bar Materials Usable Materials: Flat bar (JIS h14 grade) made of SS400, S45C or SUS304 etc.
Open the catalog to page 12Performance Curve ■The displacement of steel bar by axial load (Static load from single direction) A A: QCSQ 1212,1616 B: QCSQ 2509,2512 QCSQ 3212,3216 Note: The above data is for a flat bar made of SUS304 stainless steel, SS400 steel and S45C steel. Using an aluminum flat bar, the surface will be scratched or dent by applied load. Technical Information ・Heat resistance : Up to 90℃ ・Rated load : QCSQ 1212,1616 : 500N QCSQ 2509,2512,3212,3216 : Up to 800N Note The following conditions may cause displacement increasing or misalignment. 1. Use under slippage or chattering caused by vertical or...
Open the catalog to page 13RISER PLATES FOR SLIDING LOCK □L P Body Part Number ■How to Use Riser Plate Riser Plates (to be ordered separately) can lift the steel bar to create a clearance between the steel bar and the base. Riser Plate ■How to Use Tapped Holes on Side Surface Can be used with attachments such as pointer plates and brackets. Screw Size M3×0.5 Note: Screw depth must be 6mm or less. ■How to Use Scale Plate ・Scale plate can be put on the steel bar. Note: Fit scale plate inside the slot in the figure below. Putting scale plate outside the slot cause interference between scale plate and Sliding Lock, and...
Open the catalog to page 14All Imao Corporation catalogs and technical brochures
-
Quick Shaft Clamps
15 Pages
-
Modular Pull Clamping System
35 Pages
-
MECHANICAL LINEAR ACTUATORS
49 Pages
-
PNEUMATIC CLAMPS
36 Pages
-
ONE-TOUCH SLIDING LOCKS
28 Pages
-
Spring Clamps
23 Pages
-
NUTRUNNER CLAMPS
24 Pages
-
5-Axis Clamping Systems
15 Pages
-
Machinable Collet Clamps
38 Pages
-
Side Clamps
27 Pages
-
Torque Limiting Knobs & Handles
16 Pages
-
Flex Locators
38 Pages
-
ONE-TOUCH CLAMPS
54 Pages
-
WORK SUPPORTS
24 Pages
-
PNEUMATIC CLAMPING FASTENERS
26 Pages
-
Bearing Guide Rollers
35 Pages
-
TENSIONERS
40 Pages
-
CLAMPS
106 Pages
-
HANDWHEELS & HANDLES
29 Pages
-
SCREWS & NUTS
13 Pages
-
CLAMPING KNOBS
23 Pages
-
LOCATING PARTS
14 Pages
-
GRIPPERS
19 Pages