NUTRUNNER CLAMPS
7Pages

{{requestButtons}}

Catalog excerpts

NUTRUNNER CLAMPS - 1

Nutrunner Clamps

Open the catalog to page 1
NUTRUNNER CLAMPS - 2

SWING CLAMPS (Spiral-Acting) Body / Clamp-Arm Holder / Hex. Head SCM440 steel Quenched and tempered Black oxide finish Without Clamp Arm Clamp Arm S45C steel Quenched and tempered Black oxide finish Counterclockwise Clamping Feature The inside spiral groove allows the clamp arm to swing positively. Locating Boss Note: Use when locating clamps is required in the robotized production line.

Open the catalog to page 2
NUTRUNNER CLAMPS - 3

■With Clamp Arm Part Number Clamping Force Allowable Screw Torque Clamping Weight (kN) (N・m) Direction (g) ■Without Clamp Arm Part Number Clamping Force Allowable Screw Torque Clamping Weight (kN) (N・m) Direction (g) Note: If you prepare a custom clamp arm, contact us for the dimensional information on its mounting section. Note that custom clamp arms made by yourselves may cause clamping force to be increased or decreased. 1. Unclamped Mode Load or unload a workpiece. 2. Ready-To-Clamp Mode When the hex. head is turned by a nut runner, the clamp arm swings fast to the clamping position....

Open the catalog to page 3
NUTRUNNER CLAMPS - 4

BLOCK PULL CLAMPS Locating Bushing S45C steel Black oxide finish SCM steel Quenched and tempered Black oxide finish SCM steel Quenched and tempered Black oxide finish Part Number Options of Operating Tool Clamping Force Allowable Screw (kN) Torque(N・m) Spanner or Socket Wrench Nut Runner (for robotization) Impact Wrench Note Do not use applying a greater torque than allowable for a long period of time, to avoid damage. When an impact wrench is used, the torque-settable type is recommended. Related Product PTPD-M C

Open the catalog to page 4
NUTRUNNER CLAMPS - 5

Feature Clamp the workpiece from bottom. ■Better Workability Block Pull Clamps allow fastening a workpiece easily, unlike the conventional method of fastening with hexagon head screws from below. Block Pull Clamps mount under a workpiece making its surfaces to be machined fully open for the cutting tool. This allows completing multiple machining processes at a time. Workpiece Workpiece Clamping Screws Clamping Screws Power-Tool Actuated Remote-Control Unit Hex. Head Screw In addition to tightening with wrench, this clamp can be operated with nut runner for automation and impact wrench for...

Open the catalog to page 5
NUTRUNNER CLAMPS - 6

CLAMPING SCREWS for BLOCK PULL CLAMPS L Part Number Proper Block Pull Clamp Body SCM435 steel Quenched and tempered Black ox

Open the catalog to page 6
NUTRUNNER CLAMPS - 7

www.imao.com/en 2002 Senbiki, Seki, Gifu 501-3954, Japan Tel : +81 575 28 5823

Open the catalog to page 7

All Imao Corporation catalogs and technical brochures

  1. QLCL

    2 Pages

  2. Side Clamps

    27 Pages

  3. Flex Locators

    38 Pages

  4. WORK SUPPORTS

    24 Pages

  5. TENSIONERS

    40 Pages

  6. CLAMPS

    106 Pages

  7. Spring Clamps

    22 Pages

  8. SCREWS & NUTS

    13 Pages

  9. CLAMPING KNOBS

    23 Pages

  10. LOCATING PARTS

    14 Pages

  11. GRIPPERS

    19 Pages