Modular Pull Clamping

MODULAR PULL CLAMPING SYSTEM Perfect for Machining 5 Sides! Can hang the workpiece before clamping! New Style of Pull Clamps! MODULAR PULL CLAMPING SYSTEM Hook Type The cylindrical body allows machining 5 sides without tool interference! Dual surface contact of the tapered surfaces provides 5μm locating repeatability! Single Setup! Full access to 5 sides without tool interference! Mechanical Zero Point Clamping! Quick and precise fixture changing! Simple workholding ! Better Machining Accuracy Shorter Fixture Preparation Time Lower Fixture Cost No Tool Interference Flanged

Fixture Improvement Before Many setups with vise Pull clamping with screws (Using riser blocks) Pull clamping with screws (Using fixture plate) Single Setup Easy Clamping Operation Eliminating Interference with Fixture Plate After Without fixture plate With fixture plate Mounting clamping screws on fixture plate Mounting clamping screws directly on workpiece Quick Fixture Change Quick and precise fixture change No need of mounting holes Full space is available for fixture parts. Modular Fixture Workpiece Raising Can be used as a universal fixture by standardizing the mounting hole location. Prevent...

Clamping Modules Part Number Low profile, fixed with hexagon socket head cap screws Part Number Flexible type with clamping mechanism on the top and bottom Only with socket-CP159 headcap screws Clamping Module Locating Repeatability with socket-headcap screws

Clamping Screws Mount to bottom of workpiece to pull it down Machining Area For machining close area to clamping module To avoid tool interferences, raise workpieces with Riser Screws. With Riser Workpiece Locating Repeatability (μm) Tapered Clamping Screws (Round) 5 Overall surface is the reference. Overall surface is the reference. With Riser Tapered Clamping Screws (Diamond) Diagonal surfaces are the references. CP155-D Diagonal surfaces are the references. CP155-DS With Riser Clamping Screws For compensation of workpiece distortion Workpiece Locating Repeatability (μm) Use with the converted...

CLAMPING MODULES (Flanged) CLAMPING MODULES (Double) CLAMPING MODULES (Single) TAPERED CLAMPING SCREWS TAPERED CLAMPING SCREWS CLAMPING SCREWS TAPERED RISER SCREWS TAPERED RISER SCREWS RISER SCREWS TAPERED PINS DOUBLE TAPERED CLAMPING PINS LOCATING BUSHINGS

TAPERED FLOATING SCREWS TAPERED FLOATING SCREWS CLAMPING SCREWS CLAMPING MODULES (Hook) TAPERED CLAMPING SCREWS (Hook) TAPERED CLAMPING SCREWS CLAMPING SCREWS (Hook) CLAMPING SCREWS

CLAMPING MODULES (Flanged) ICP150 I -08040,12063,16080 Part Number Related Product Supplied With ICP150I -08040,12063,16080 : 2 pcs. of flat washer Techinical Information Allowable Cutting Force & Workpiece Weight of CLAMPING MODULES ■| CP155-L] Tapered Clamping Screws ■| CP155-~Dl Tapered Clamping Screws ■| CP156 | Clamping Screws ■| CP157 1 Tapered Pins For workpiece raising ■ I CP155-LS1 Tapered Riser Screws ■ I CP155-DS1 Tapered Riser Screws For compensation of workpiece distortion ■ | CP155-LM1 Tapered Floating Screws ■ | CP155-DM| Tapered Floating Screws

How To Use ・Use CP157-L Tapered Pin (Accurate) for precise locating. ・Use CP157-S Tapered Pin (Standard) for rough locating. ■Mounting-Hole Dimension Hex. Socket-Head Cap Screws Part Number Tapered Pin (Accurate/Standard) CP157-L・CP157-S Fixture Plate Note: The machining tolerance for dimension “d” of the Standard Tapered Pin should be+0.1 , and apply a C0.5 chamfer to the +0 hole edge. ■Spacing Tolerance Spacing tolerance for CP157-L Tapered Pins (Accurate) should be ±0.02. *) Spacing tolerance for CP157-S Tapered Pins (Standard) should be ±0.1. Tapered Clamping Screws (Round) CP155-L Tapered...

CP151 CLAMPING MODULES (Double) Part Number Related Product ■ | CP150 | Clamping Modules (Flanged) ■ | CP152 | Clamping Modules (Single) ■ | CP155-L | Tapered Clamping Screws ■ | CP155-D | Tapered Clamping Screws ■ |CP155-LS| Tapered Riser Screws ■ |CP155-DSl Tapered Riser Screws For compensation of workpiece distortion ■ |CP155-LMl Tapered Floating Screws ■ |CP155-DMl Tapered Floating Screws Allowable Cutting Force & Workpiece Weight of CLAMPING MODULES imflo corporator

■Use | CP155-U Tapered Clamping Screw (Round) for precise locating. ■Use | CP156 | Clamping Screw just for fixing. ■ Mounting-Hole Dimension Locating and Fixing Part Number ISpacing Tolerance ■ Coupling with Other Clamping Modules Spacing tolerance for CP155-L Tapered Clamping Screws (Accurate) should be ±0.02. *)Spacing tolerance for CP156 Clamping Screws should be ±0.2. ^ Tapered Clamping Screws (Diamond)_ Tapered Clamping Screws (Round) ■Tightening Order Tighten the locking screws in order of 1(Round Tapered Clamping Screw)^-2(Diamond Tapered Clamping Screw)^3(Clamping Screw)^4(Clamping Screw)....

CLAMPING MODULES (Single) Part Number Part Number Allowable Cutting Force & Workpiece Weight of CLAMPING MODULES Technical Information Related Product ■ | CP150 | Clamping Modules (Flanged) ■ | CP151| Clamping Modules (Double) ■ | CP155-L | Tapered Clamping Screws ■ | CP155-D | Tapered Clamping Screws ■ ICP155-LS1 Tapered Riser Screws ■ |CP155-DS| Tapered Riser Screws For compensation of workpiece distortion ■ ICP155-LM1 Tapered Floating Screws ■ ICP155-DM Tapered Floating Screws

■Use I CP159 I Locating Bushing for precise locating. ■Use only hex. socket-head cap screw just for fixing. ■ Mounting-Hole Dimension Part Number Spacing tolerance for CP159 Locating Bushings should be ±0.02. *) Spacing tolerance for hex. socket-head cap screw should be ±0.1. Note:Only c'bored hole is required just for fixing. Can be coupled with each Clamping Module. (Locating Repeatability is 5^m> Tightening Order Tighten the locking screws in order of 1(Round Tapered Clamping Screw)^ 2(Diamond Tapered Clamping Screw)^3(Clamping Screw)^4(Clamping Screw). Note: For I CP152I -06032, use 2 pieces...

TAPERED CLAMPING SCREWS Part Number CP155-D TAPERED CLAMPING SCREWS Part Number