Catalog excerpts
Value Creator Modular Pull Clamping System m
Open the catalog to page 1MODULAR PULL CLAMPING SYSTEM Hook Type New Style of Pull Clamps! MODULAR PULL CLAMPING SYSTEM The cylindrical body allows machining 5 sides without tool interference! Dual surface contact ofthe tapered surfaces provides 5^rn locating repeatability! Sing I e Setup! Full access to 5 sides without tool interference! Better Machining Accuracy Lower Fixture Cost Shorter Fixture Preparation Time No Tool Interference
Open the catalog to page 2Eliminating Interference with Fixture Plate Quick Fixture Change Quick and precise fixture change No need of mounting holes Full space is available for fixture parts. Modular Fixture Workpiece Raising Universal Fixture CAD Download : https://www.imao.com/en/ imnocoRPORflTion
Open the catalog to page 3Clamping Modules Part Number Precise Locating lMounting on plate! Flanged Low profile, fixed with hexagon socket head cap screws Part Number fruplin, with another module^ Double Flexible type with clamping mechanism on the top and bottom Precise Locating Rough Locating Only with socket-CP159 headcap screws Clamping Module Locating Repeatability with socket-headcap screws 0.04mm
Open the catalog to page 4Clamping Screws Mount to bottom of workpiece to pull it down Machining Area For machining close area to clamping module To avoid tool interferences, raise workpieces with Riser Screws. With Riser Tapered Clamping Screws (Round) Workpiece Locating Repeatability (μm) For Precise Locating Overall surface is the reference. CP155-L Overall surface is the reference. With Riser Tapered Clamping Screws (Diamond) Workpiece Locating Repeatability (μm) 5 (Should be used with round type.) For Precise Locating Diagonal surfaces are the references. CP155-D Diagonal surfaces are the references. CP155-DS...
Open the catalog to page 5CLAMPING MODULES (Single) Part No. CPI 52 TAPERED CLAMPING SCREWS TAPERED RISER SCREWS LOCATING BUSHINGS
Open the catalog to page 6CLAMPING MODULES TAPERED CLAMPING SCREWS (Hook) Part No. CPI 65-LH TAPERED CLAMPING SCREWS Part No. CPI 65-L
Open the catalog to page 7CLAMPING MODULES (Flanged) CP150 I -08040,12063,16080 Part Number Supplied With ICP150I -08040,12063,16080 : 2 pcs. of flat washer Allowable Cutting Force & Workpiece Weight of CLAMPING MODULES CP155-L Tapered Clamping Screws CP155-D Tapered Clamping Screws CP156 | Clamping Screws CP157 I Tapered Bushings For workpiece raising ■ I CP155-LS1 Tapered Riser Screws ■ ICP155-DS1 Tapered Riser Screws ■ ICP156-S] Riser Screws
Open the catalog to page 8How To Use ・Use CP157-L Tapered Bushing (Accurate) for precise locating. ・Use CP157-S Tapered Bushing (Standard) for rough locating. ■Mounting-Hole Dimension Hex. Socket-Head Cap Screws Part Number Tapered Bushing (Accurate/Standard) CP157-L・CP157-S Fixture Plate Note:The tolerance of dimension "d" for Tapered Bushing (Standard) should be . ■Spacing Tolerance Spacing tolerance for CP157-L Tapered Bushings (Accurate) should be ±0.02. *) Spacing tolerance for CP157-S Tapered Bushings (Standard) should be ±0.1. Tapered Clamping Screws (Round) CP155-L Tapered Bushing (Accurate) CP157-L Fixture...
Open the catalog to page 9CP151 CLAMPING MODULES (Double) Part Number Related Product CP150 | Clamping Modules (Flanged) ■ |CP155-L] Tapered Clamping Screws CP152 | Clamping Modules (Single) ■ | CP155-D I Tapered Clamping Screws ■ | CP156 | Clamping Screws For workpiece raising ■| CP155-LS | Tapered Riser Screws ■ |CP155-Ds! Tapered Riser Screws ■ [CP156-S] Riser Screws Allowable Cutting Force & Workpiece Weight of CLAMPING MODULES imflo corporator
Open the catalog to page 10■Use | CP155-L Tapered Clamping Screw (Round) for precise locating. ■Use | CP156 | Clamping Screw just for fixing. ■ Mounting-Hole Dimension Locating and Fixing Part Number ISpacing Tolerance ■ Coupling with Other Clamping Modules Spacing tolerance for CP155-L Tapered Clamping Screws (Accurate) should be ±0.02. *)Spacing tolerance for CP156 Clamping Screws should be ±0.2. Tapered Clamping Screws (Diamond) CP155-D Tapered Clamping Screws (Round) CP155-L ■Tightening Order Tighten the locking screws in order of 1(Round Tapered Clamping Screw)^ 2(Diamond Tapered Clamping Screw)^3(Clamping...
Open the catalog to page 11CLAMPING MODULES (Single) Part Number Part Number Allowable Cutting Force & Workpiece Weight of CLAMPING MODULES Technical InformationRelated Product CP150 | Clamping Modules (Flanged) -| CP155-L] Tapered Clamping Screws CP151I Clamping Modules (Double) ■ | CP155-D] Tapered Clamping Screws CP159 | Locating Bushings -| CP156 | Clamping Screws For workpiece raising ■ I CP155-LS I Tapered Riser Screws ■ |CP155-DSl Tapered Riser Screws ■ ICP156-S] Riser Screws
Open the catalog to page 12■Use I CP159 I Locating Bushing for precise locating. ■Use only hex. socket-head cap screw just for fixing. ■ Mounting-Hole Dimension Part Number Note:Only c'bored hole is required just for fixing. Hex. Socket-Head Cap Screw Spacing tolerance for CP159 Locating Bushings should be ±0.02. *) Spacing tolerance for hex. socket-head cap screw should be ±0.1. Tapered Clamping Screws (Round) ■ Coupling with Other Clamping Modules Can be coupled with each Clamping Module. (Locating Repeatability is 5^m> Tightening Order Tighten the locking screws in order of 1(Round Tapered Clamping Screw)^...
Open the catalog to page 13TAPERED CLAMPING SCREWS Li Tapered Bushing Part Number CP155-D TAPERED CLAMPING SCREWS Li L Tapered Bushing Part Number
Open the catalog to page 14Round Type ■Can be used for locating | CP1511 Clamping Module (Double). ■ Can be used for locating a workpiece with diamond type. Diamond Type ■Can be used for locating a workpiece with round type. ■Fix the tapered bushing of diamond type after deciding the direction. Note: For I CP150 I-06025, I CP1511-06050 or I CP152 I -06032, use 2 pieces of Round Type. ■Spacing Tolerance Application Example ■ Coupling of Clamping Module (Single) Round type can be used as a coupling for Clamping Module (Single). {Locating Repeatability is 5^m> ■ I CP150 I Clamping Modules (Flanged) ■ ICP151I Clamping...
Open the catalog to page 15SCM435 steel Quenched and tempered Black oxide finished Part Number CLAMPING MODULES How To Use ・Can be used for mounting CP151 Clamping Module (Double) on the fixture plate. ・Can be installed on the workpiece. ・No locating function. ・Spacing tolerance of the tapped holes should be ±0.2. Tapered Clamping Screws (Round) CP155-L Tapered Clamping Screws (Round) CP155-L Clamping Modules (Double) CP151 Tapered Clamping Screws (Diamond) CP155-D Tapered Clamping Screws (Round) CP155-L Related Product ・CP150 Clamping Modules (Flanged) ・CP151 Clamping Modules (Double) ・CP152 Clamping Modules...
Open the catalog to page 16All Imao Corporation catalogs and technical brochures
-
Quick Shaft Clamps
15 Pages
-
MECHANICAL LINEAR ACTUATORS
49 Pages
-
PNEUMATIC CLAMPS
36 Pages
-
ONE-TOUCH SLIDING LOCKS
28 Pages
-
Spring Clamps
23 Pages
-
NUTRUNNER CLAMPS
24 Pages
-
ONE-TOUCH SLIDING LOCKS
35 Pages
-
5-Axis Clamping Systems
15 Pages
-
Machinable Collet Clamps
38 Pages
-
Side Clamps
27 Pages
-
Torque Limiting Knobs & Handles
16 Pages
-
Flex Locators
38 Pages
-
ONE-TOUCH CLAMPS
54 Pages
-
WORK SUPPORTS
24 Pages
-
PNEUMATIC CLAMPING FASTENERS
26 Pages
-
Bearing Guide Rollers
35 Pages
-
TENSIONERS
40 Pages
-
CLAMPS
106 Pages
-
HANDWHEELS & HANDLES
29 Pages
-
SCREWS & NUTS
13 Pages
-
CLAMPING KNOBS
23 Pages
-
LOCATING PARTS
14 Pages
-
GRIPPERS
19 Pages