Machinable Collet Clamps
38Pages

Machinable Collet Clamps

FORM HOLDING CLAMPS JAWS FOR EXTERNAL FORM HOLDING JAWS FOR INTERNAL FORM HOLDING TAPERED SCREWS FOR INTERNAL FORM HOLDING MOUNTING-ON-LATHE ADAPTERS OD HOLDING CLAMPS (Wedge Style/Square) OD HOLDING CLAMPS (Wedge Style/Round) PNEUMATIC OD HOLDING CLAMPS

COMPACT ID HOLDING CLAMPS SIDE LOCK ID HOLDING CLAMPS Part No. MBSID

FORM HOLDING CLAMPS External form holding Internal form holding External form holding Internal form holding Clamp any shape! Hold on external / internal form! Clamp any HOLDING CLAMPS FORMshape! Hold on external / internal form! FORM HOLDING CLAMPS Form Holding Clamps with a machinable jaw are perfect for irregularshaped workpieces. Simple workholding on external/internal form eliminates the need for custom fixtures. Secure clamping for odd shaped workpieces Versatile workholding by changing jaw Quick clamping by tightening cam cylinder

Application Example Clamping Low Profile Workpiece Internal Form 8 jaw sections distribute clamping force to workpiece for deformation prevention. Note to control the tightening torque using adequate tools in reference to the data provided by the performance curve. External Form Can be mounted on the existing vise by attaching the clamp on plate. Multipul Workholding External Form Small cylindrical body allows the multi-piece clamping in limited space. Fixture for Turning Lathe Can clamp odd shape that a chuck does not clamp. External Form CP122 Mounting-on-lathe Adapter is available.

FORM HOLDING CLAMPS Pull Cylinder SCM415 steel SCM435 steel S45C steel Carburized-hardened Quenched & tempered Electroless nickel plated Black oxide finish Black oxide finish MFor SocketHead Cap Screws 2-Round Locating Pins (for jaw locating) ★Key Point Can hold on external/ internal form. Part Number Part Number Allowable Screw Weight Torque(N・m) (kg) Proper Jaws For External Form Holding For Internal Form Holding Part Number Clamping Force(kN) Clamping Stroke Part Number Clamping Force(kN) Clamping Stroke Technical Information ・Part locating repeatability: ±0.03 ・Jaw locating...

Supplied With Related Product ・CP125-06501 1 pc. of Diamond Locating Pin (BJ722-06001) ・CP125-09001 1 pc. of Diamond Locating Pin (BJ722-08001) ・CP125-12001 1 pc. of Diamond Locating Pin (BJ722-10001) ・CP125-16001 1 pc. of Diamond Locating Pin (BJ722-12001) ・CP126 Jaws for External Form Holding ・CP127 Jaws for Internal Form Holding ・ BJ722 Diamond Locating Pin ・CP122 Mounting-on-lathe Adapters Feature TAPERED SCREW FOR INTERNAL FORM HOLDING CP127-B Two optional jaws allow clamping a workpiece both on its external form and internal form. JAW FOR EXTERNAL FORM HOLDING CP126 JAW FOR INTERNAL...

JAWS FOR EXTERNAL FORM HOLDING Jaw Locking Ring A7075 aluminum S45C steel Anodized Black oxide finish Blue M-For Hex Socket Button Head Screw Locking Ring Part Number Supplied With ・ 1 pc. of O-ring ・ 1 pc. of Locking Ring ・ 1 pc. of Hex Socket Button Head Screw Feature ・ The diaphragm clamping mechanism allows securely clamping a part with 8 jaw sections. ・ 0.15mm clamping stroke of each jaw section is perfect for clamping of lost-wax parts, die-cast parts, extruded parts, solid-drawn parts, prefinished parts, etc. ① When the cam cylinder is tightened, the central bottom part of the jaw is...

How To Use 1. Jaw Mounting ・Insert an O-ring to the groove on top surface of the Form Holding Clamp. ・Set a Jaw putting its locating holes onto the round locating pins and fix it with a hex socket button head screw. Set the locking ring in the jaw. (Using a screw facilitates setting.) Note: At jaw installation, ensure the cam cylinder is fully loosened by turning counterclockwise until it stops. Hex Socket Button Head Screw (included) Locking Ring (included) O-ring (included) Hex Socket Button Head Screw Note:The locking ring must be inserted onto the bottom button screw. Round Locating...

JAWS FOR INTERNAL FORM HOLDING Jaw A7075 aluminum Anodized Silver Proper Proper CP125 Clamps CP127-B Screws Supplied With 1 pc. of O-ring TAPERED SCREWS FOR INTERNAL FORM HOLDING L SCM435 steel Quenched and tempered Electroless nickel plated Part Number Feature ・The tapered screw expands the jaws towards eight directions to hold different irregularly-shaped workpieces securely. ・0.15mm clamping stroke of each jaw section is perfect for clamping of lost-wax parts, die-cast parts, extruded parts, solid-drawn parts, prefinished parts, etc. 　①When the cam cylinder is tightened, 　　the tapered...

How To Use 1.Jaw Mounting ・Insert an O-ring to the groove on top surface of the Form Holding Clamp. ・Set a Jaw putting its locating holes onto the round locating pins and fix it with a tapered screw. Note: At jaw installation, ensure the cam cylinder is fully loosened by turning counterclockwise until it stops. CP127 JAW O-ring (Furnished with jaw) Round Locating Pins Cam Cylinder 2. Jaw Machining 2-2. Machine the jaw to the contours of workpiece. （Do not machine the jaws beyond the machinable depth.） Machinable Depth 2-1. 　　Loosen the cam cylinder fully and measure the 　　dimension of the...

Compact design with high clamping force Applicable to small workpieces of φ2.5mm and long workpieces Jaw Cap S17C Steel A6061 aluminum Fluoroplastic coated Hard anodized ★Key Point Part Number *)Machine the jaw to the workpiece diameter with attention to the Recommended Jaw Compression. Part Number Clamping Force Allowable Tightening kN Torque Nm Related Product Jaws can be ordered separately. ・ MBOD-01 Jaws

・Collet-shaped jaws generate high clamping force. ・The machinable jaw can clamp any shape of workpieces and hold long workpieces with a wide clamping area by machining completely through. Note Fixture Plate Do not tighten the cap without the workpiece to prevent damage and deformation. How To Use ①Prepare a pocket on the plate according to D dimension of the jaw and drill 6 tapped holes. ②Fix the jaw on the plate with the supplied screws. Fixture Plate ③Tighten the cap until the compression reaches the Recommended Jaw Compression. Each 15°of rotation compresses 0.025mm for jaw of MBOD-1 and...