Value Creator Locating Parts

SPRING-LOADED WORK LOCATORS (Accurate) Body Steel (S４５C) Steel (SK95) Quenched and tempered Quenched and tempered Black oxide finish

Part Number Part Number Part Number *) The through hole can be chamfered up to iximm. Continuing on Next Page

Present Method Use of tapered pin allows secure locating with no clearance between the locating hole and the tapered pin. ■ Standard Type Use Before Setting Workpiece After Setting Workpiece Use with 2 mm higher supports to provide proper clearance to the workpiece. When the workpiece is set, the tapered pin is pressed down to locate it. The Accurate Type allows positioning both vertically and horizontally.

QLSW Swing Clamp Note：In clamping， hold down the workpiece by hand to avoid lift that can be generated by spring force

WORK LOCATORSRetfS Body

Part Number *) Allowable load to operate the handle **)Max. weight that allows the locating pin to project and provide workpiece centering How To Use Present Method Imao Method The locating pin gets projected only after the workpiece is set on supports. This allows loading and unloading the workpiece smoothly, with no galling. Get the locating pin projected to locate the workpiece after it is roughly positioned with the help of locating guides. Retracted Mode Projected Mode O Workpiece Centering Pin Gets 1.Rough Locating With 2.Pin Projection 3.Completed Locating Guides Locating

EXTENDABLE WORK LOCATORS Body & Piston Crank shaft Steel (S４５C) Steel (S４５C) Quenched and tempered Black oxide finish Black oxide finish ３−M−For Hex． Socket Head Cap Screws Dp FKR－BR Adjustable Handle The handle position can be changed freely， clockwise or counterclockwise． M1-Hex． Socket Head Setscrew M2

Part Number Part Number Adjustable Handles Allowable Operating Max．Workpiece Weight Load（N）＊） Weight（kg）＊＊） （kg） ＊） Allowable load to operate the handle ＊＊）Max． weight that allows the locating pin to project and provide workpiece centering Extended Application Locating−Pin Mounting Locating Pin （custom-made） Hex. Socket Setscrew with Brass Pad Shaft Holder （custom-made） Adjustable Handle Extension Shaft （custom-made） With an extension shaft and a shaft holder prepared separately, the handle control can be easily done even when small space is available under the workpiece. Projected Mode A locating...

LOCATING SCREWS (Standard) RdkUC Part Number

ROUND LOCATING PINSRetfS Part Number 14517Q Related Product Pages Use I NKL | Pin Extractors to pull out these pins.

RetfS DIAMOND LOCATING PINSHIAO Part Number Related Product Pages Use I nkl I Pin Extractors to pull out these pins.

RetfS DIAMOND LOCATING PINS Part Number Related Product Pages Use I nkl | Pin Extractors to pull out these pins.

FLAT KEYS For D- Socke-Head Cap Screw G Material : S45C steel Heat Treat : Quenched and tempered (Rc39 - 45) Finish : Black oxide Precision ground Part Number Fixture Plate