Value Creator Handwheels & Handles

PLASTIC ANGLED SOLID HANDWHEELS RsmU wl I Without Handle

ALUMINUM ANGLED SOLID HANDWHEELS 06 Ideal for marine machines, food processing machines and the like NDA handwheels are not provided with a handle-mounting tapped hole.

ASH ALUMINUM SOLID SQUARE HANDWHEELS Part Number ■ Nearly one-third as heavy as steel handwheels. ■ Comes with a I SFRI revolving fold-away handle.

ALUMINUM ANGLED-SPOKE HANDWHEELS (Without Handle-Mounting Tapped Hole) (With Handle-Mounting Tapped Hole) Note:Handle must be ordered separately. Aluminum alloy（AC4B） Buffed finish Without Handle-Mounting Tapped Hole With Handle-Mounting Tapped Hole No. of Spokes F Part Number Part Number With Handle-Mounting Recommended Aluminum Fixed Handles Tapped Hole Part Number Part Number G H Recommended Aluminum Revolving Handles Part Number Notes Slight dimensional variations can be caused due to buffed finish.

CAST IRON SPOKED HANDWHEELS φK G (Angle-Spoke Without Handle-Mounting Tapped Hole) (Angle-Spoke With Handle-Mounting Tapped Hole) Note : Handle must be ordered separately. Handwheel Cast iron Chrome plated Part Number No. of Without Handle-Mounting With Handle-Mounting Spokes Tapped Hole Tapped Hole

Handle Recommendations Handwheel of 250mm or greater diameter has finger grips are available also with a I SRG10 I or I SRG 10S I stainless steel revolving handle ■ NV 80^315: The handle-mounting tapped hole is not provided. ■ NW 355^500: The handle-mounting tapped hole is provided. The handwheels come with a dedicated plug and a hex socket head screw pre-installed in the handle-mounting tapped hole.

PLASTIC ANGLED-SPOKE HANDWHEELS Type Type / Size Without Handle

CAST IRON ANGLED-SPOKE HANDWHEELS Part Number ■ Comes with a I sf r | revolving fold-away handle.

ALUMINUM ANGLED-SPOKE HANDWHEELSReHS |AL2SP (With Handle-Mounting Tapped Hole) Note:Handle must be ordered separately Aluminum alloy(AC4R) Ruffed finish ■ Aluminum fixed handles and aluminum revolving handles can also be used. ■ Slight dimensional variations can be caused due to buffed finish.

CAST IRON ANGLED-SPOKE HANDWHEELS S-ER (With Revolving Handle, Chrome Plated) Type / Size ■ The rim has finger grips. ■ Neither [ns] nor I NBS I handwheels are provided with a handle-mounting hole.

STAINLESS STEEL ANGLED-SPOKE HANDWHEELS (Without Handle-Mounting Tapped Hole) (With Handle-Mounting Tapped Hole) Note:Handle must be ordered separately. Handwheel SCS13（equivalent to SUS304） Electropolished finish Part Number Without Handle-Mounting With Handle-Mounting Tapped Hole Tapped Hole Recommended Handles Part Number Stainless Steel Revolving Handles Part Number J ・ All made from stainless steel, for excellent corrosion resistance. ・ Perfect for use on food processing machines, washing machin

ALUMINUM FINGER WHEELS IahI (Without Handle) Aluminum alloy (A5056) Anodized Black Steel(SUM22) Hard chrome plated Polyamide plastic (Only for AHR80) (Phenolic plastic) Black Polyamide plastic Black matte Without Handle Features Notes: ■ Tensile strength of material : 250N/mm or more AH handwheels are not provided with a handle-mounting tapped hole.

STAINLESS STEEL FINGER WHEELSR®HS I sus The I SSH I type is not provided with a handle-mounting tapped hole.

SPEED HANDLES (Tapped) Body & Lever Ductile cast iron （FCD450） Powder baked finish Black Reamed Part Number Weight（g） Bored Part Number Weight（g） Tapped Part Number Weight（g）

CAST IRON CRANK HANDLES (Straight Crank, Round Hole) Note : Handle must be ordered separately. (Offset Crank, Square Hole) Note : Handle must be ordered separately. Body Ductile cast iron (FCD450) Coated with anticorrosive oil SC OC SC-S OC-S （Blank,Round Hole） （Square Hole） (Straight Crank) (Round Hole)

Square Hole Blank（OC4 - OC6）,Round Hole（OC7 - OC10） Part Number H D1 L d *） Part Number H D1 L w +0.2 0 Note *）The diameter has a casting surface. OC OC-S (Offset Crank) Blank（OC4 - OC6）,Round Hole（OC7 - OC10） Square Hole Part Number H D1 L d **) Part Number H D1 L w +0.2 0 Handle Recommendations Fixed Handle Part Number B H1 Revolving Handle Part Number B H1 Notes ・Crank handles with a square hole are machined on the outside diameter and the bottom of the hub. ・The corners of the square hole may be sharp or round, depending on the production batch.

ALUMINUM HANDLESimno M w-Across Flats A hex. wrench hole is provided at the end of the stud, for installation. Dimensions are subject to slight variations due to buffed finish.

ROUNDED HANDLES Handle

STEEL HANDLES Steel(SUM２２) Hard chrome plated Part Number Part Number

Value Creator

TAPERED HANDLES imno (BrassInsert) Type

Part Number

PLASTIC REVOLVING HANDLES Across Flats w

■ All FR handles can be folded in 360° directions by loosening the shank. ■ A hex. wrench hole is provided at the shank end of the FR handles, for installation. ■ Do not use at locations which receive direct sunlight or outdoors. ■ Use in hot or highly humid environments can deteriorate the properties of the plastic material. 1 Tighten the screw loosely into the handwheel in the clockwise direction unitl it is in a fully engaged position. 2 Insert a hex. wrench from the bottom into the screw and give it a 360° turn in the counterclockwise (loosening) direction. 3 Lock the screw using the hex....

STAINLESS STEEL REVOLVING HANDLESR®HS|sus Body Part Number

STAINLESS-STEEL REVOLVING HANDLES imno Part Number

PLASTIC BALL KNOBS R/aiUC ■ A slightly tapered tapped hole in thePB knobs provides positive lock. ■ If an adhesive agent is applied, it should be adaptive to the ABS plastic. ■ Use in hot or highly humid circumstances can deteriorate the plastic material properties.

STAINLESS STEEL BALL KNOBS Body Stainless steel(SUS３０４) Polished finish Part Number Features Ideal for food processing machines and washing machines.

ALUMINUM BALL KNOBS SφD Part Number Notes Dimensions are subject to slight variations due to buffed finish.