Flex Locators
38Pages

{{requestButtons}}

Catalog excerpts

Flex Locators - 2

FLEX LOCATORS One Touch Clamping Locators for Quick and Accurate Fixture Change One Touch Flex Locators are mechanical clamping locators for quick change applications. Positioning and clamping in an easy single operation reduces set up time in fixture change.Tapered surface contact provides precise locating repeatability of 0.01 mm. One-Touch Type ONE-TOUCH FLEX LOCATORS (Knob) ONE-TOUCH FLEX LOCATORS Clamping Force: Clamping Force: ONE-TOUCH FLEX LOCATORS (Cam Handle) ONE-TOUCH FLEX LOCATORS (Hexagon Head) Clamping Force: Clamping Force:

Open the catalog to page 2
Flex Locators - 3

Pneumatic Type Clamping Force: Clamping Force: Simple Locators FLEX LOCATORS (Blind) FLEX LOCATORS (Through)

Open the catalog to page 3
Flex Locators - 4

One Touch ONE-TOUCH FLEX LOCATOR CLAMPERS (Knob) ONE-TOUCH FLEX LOCATOR CLAMPERS ONE-TOUCH FLEX LOCATOR BUSHINGS ONE-TOUCH FLEX LOCATOR CLAMPERS (Cam Handle) ONE-TOUCH FLEX LOCATOR CLAMPERS (Hexagon Head) ONE-TOUCH FLEX LOCATOR BUSHINGS ONE-TOUCH FLEX LOCATOR PROTECTING COVERS ADJUSTABLE-TORQUE WRENCHES PNEUMATIC FLEX LOCATOR PINS PNEUMATIC FLEX LOCATOR BUSHINGS

Open the catalog to page 4
Flex Locators - 5

PNEUMATIC FLEX LOCATOR PINS PNEUMATIC FLEX LOCATOR BUSHINGS Locating Element FLEX LOCATOR PINS FLEX LOCATOR BUSHINGS (Blind) FLEX LOCATOR PROTECTING COVERS FLEX LOCATOR PINS FLEX LOCATOR BUSHINGS (Through) FLEX LOCATOR PROTECTING COVERS Part No. CP726-P

Open the catalog to page 5
Flex Locators - 6

ONE-TOUCH FLEX LOCATOR CLAMPERS (Knob) Body / Shank Tapered Pin SCM440 steel SCM440 steel SCS13 stainless steel SUS304 Black oxide finished Nitrocarburized (Equivalent to SUS304) stainless steel ★Key Point Space saving operation Part Number Part Number Clamping Force(N) Proper One-Touch Flex Locator Bushing *) The lifting force is the power of the inner spring of the body to push up the movable tapered bushing. ■Mounting Hole Dimension Part Number Supplied With ・ CP723-0632R-04 :Four pieces of hex. socket-head cap screws M3×0.5-8L ・ CP723-0840R-06 :Four pieces of hex. socket-head cap screws...

Open the catalog to page 6
Flex Locators - 7

SCM440 steel SCM440 Black Oxide Finished Nitrocarburized ZDC1 SUS303 die-cast zinc stainless steel Silver-gray painted Unclamping Position Part Number Clamping Force Lifting Force (N) (N)*) With Without Proper One-Touch Flex Locator Bushing *) The lifting force is the power of the inner spring of the body to push up the movable tapered pin. Reference How To Use ONE-TOUCH FLEX LOCATORS (Handle / Knob) Can be used with plates of 10mm 22mm thickness. ■Mounting Hole Dimension Installation on 10mm-22mm Thick Plate Drill a counterbored hole. Supplied With 4 of M3×0.5-10L Hex Socket-Head Cap Screw...

Open the catalog to page 7
Flex Locators - 8

ONE-TOUCH FLEX LOCATOR BUSHINGS 45° 2-M3×0.5 (Tapped Hole for Removal) 4-φ3.4 Part Number Body SCM440 steel Nitrocarburized ■Mounting Hole Dimension Insert screws into the tapped holes to lift up the bushing for removal. Part Number ■Spacing Tolerance Related Product ・ CP722 ONE-TOUCH FLEX LOCATOR CLAMPERS ・ CP723 ONE-TOUCH FLEX LOCATOR CLAMPERS(Knob) Reference How To Use ONE-TOUCH FLEX LOCATORS (Handle / Knob)

Open the catalog to page 8
Flex Locators - 9

One Touch Pneumatic Locating Element CAD Download : https://www.imao.com/en/

Open the catalog to page 9
Flex Locators - 10

How To Use ONE-TOUCH FLEX LOCATORS (Handle / Knob) Feature Spring Clamped Clamped Tapered Bushing Tapered Bushing ・The plates are located by fitting of the tapered pin and the tapered bushing. ・The pin contacts the cam surface inside the bushing, and it compresses the inner spring, then the plates are clamped. Note: CP722-0840R-06N does not have locating function. Two pair of clamping and unclamping positions of handle can be chosen for CP722 . Unclamping Clamping Ensure the handle is positioned at "OFF" mark. Insert the clamper to the bushing. *) Follow back these steps for unclamping. *)...

Open the catalog to page 10
Flex Locators - 11

1.Ensure the handle is positioned at "OFF" mark and lift down the fixture plate. 2.Turn the handle and clamp in order of 1→2→3→4. *) For unclamping, ensure the handle is positioned at "OFF" mark and disassemble the fixture plate. If the handles are not tightened in the correct order, the locating repeatability may exceed 10 μm. How To Use ■Horizontal Assembly of Fixture Plate Note: Ensure not to lift the fixture plate up and down with gripping the handle of the clampers. Fixture Plate Straight Clamper Base Plate Fixture Plate Tapered Clamper Base Plate Tapered Bushing Tapered Bushing...

Open the catalog to page 11
Flex Locators - 12

ONE-TOUCH FLEX LOCATOR CLAMPERS (Cam Handle) 45° Cam Handle Ball SCM440 steel SCM440 steel Black oxide finished SUJ2 steel Nitrocarburized Quenched & tempered Part Number Clamping Force Operating Load (N) (N) Part Number Proper Bushing ■Mounting Hole Dimension 4-d2 Supplied With ・ CP731-0939 Four pieces of hex. socket-head cap screws M4×0.7-10L ・ CP731-1246 Four pieces of hex. socket-head cap screws M4×0.7-15L ・ CP731-1656 Four pieces of hex. socket-head cap screws M5×0.8-20L Reference How To Use ONE-TOUCH FLEX LOCATORS (H

Open the catalog to page 12
Flex Locators - 13

ONE-TOUCH FLEX LOCATOR CLAMPERS (Hexagon Head) 45° Body SCM440 steel Nitrocarburized Clamping Screw Ball SCM435 steel Black oxide finished SUJ2 steel Quenched & tempered Part Number Part Number ■Mounting Hole Dimension C0.5 Clamping Force Allowable Screw Torque (N) (N・m)*) Locating Element Supplied With ・ CP730-0939 Four pieces of hex. socket-head cap screws M4×0.7-10L ・ CP730-1246 Four pieces of hex. socket-head cap screws M4×0.7-15L ・ CP730-1656 Four pieces of hex. socket-head cap screws M5×0.8-20L Proper Bushing *)Do not apply greater torque than allowable screw torque. Do not use a...

Open the catalog to page 13
Flex Locators - 14

ONE-TOUCH FLEX LOCATOR BUSHINGS 45 2-M (Tapped Hole for Removal) 4-d (Straight Type) Part Number Tapered Straight Tapered Straight Tapered Straight Tapered Bushing SCM440 steel CP735-L SCM440 steel Black oxide finished Nitrocarburized - CP735-S Quenched & tempered *) The lifting force is the power of the inner spring of the body to push up the movable tapered bushing. ■Mounting Hole Dimension ■Spacing Tolerance Allowable Tolerance ±0.02 Related Product ・ CP730 ONE-TOUCH FLEX LOCATOR CLAMPERS (Hexagon Head) ・ CP731 ONE-TOUCH FLEX LOCATOR CLAMPERS (Cam Handle) ・ CP735-P ONE-TOUCH FLEX LOCATOR...

Open the catalog to page 14

All Imao Corporation catalogs and technical brochures

  1. QLCL

    2 Pages

  2. Side Clamps

    27 Pages

  3. WORK SUPPORTS

    24 Pages

  4. TENSIONERS

    40 Pages

  5. CLAMPS

    106 Pages

  6. Spring Clamps

    22 Pages

  7. SCREWS & NUTS

    13 Pages

  8. CLAMPING KNOBS

    23 Pages

  9. LOCATING PARTS

    14 Pages

  10. GRIPPERS

    19 Pages