FIXTURE CHANGING SYSTEM - 46 Pages

Add to MyDirectIndustry favorites
FIXTURE CHANGING SYSTEM

Catalog excerpts

FIXTURE CHANGING SYSTEM FLEX LOCATORS QUICK ZERO SETTING DEVICE

 Open the catalog to page 1

FIXTURE CHANGING SYSTEM FLEX QUICK ZERO LOCATORS SETTING DEVICE FIXTURE CHANGING SYSTEM FLEX LOCATORS PNEUMATIC FLEX LOCATOR PINS PNEUMATIC FLEX LOCATOR BUSHINGS PNEUMATIC FLEX LOCATOR PINS PNEUMATIC FLEX LOCATOR BUSHINGS ONE-TOUCH FLEX LOCATOR CLAMPERS (Knob) ONE-TOUCH FLEX LOCATOR CLAMPERS ONE-TOUCH FLEX LOCATOR BUSHINGS ONE-TOUCH FLEX LOCATOR CLAMPERS (Hexagon Head)

 Open the catalog to page 2

FIXTURE CHANGING SYSTEM FLEX QUICK ZERO LOCATORS SETTING DEVICE ONE-TOUCH FLEX LOCATOR CLAMPERS (Cam Handle) ONE-TOUCH FLEX LOCATOR BUSHINGS ONE-TOUCH FLEX LOCATOR PROTECTING COVERS ADJUSTABLE-TORQUE WRENCHES FLEX LOCATOR PINS FLEX LOCATOR BUSHINGS (Blind) FLEX LOCATOR PROTECTING COVERS FLEX LOCATOR PINS FLEX LOCATOR BUSHINGS (Through) FLEX LOCATOR PROTECTING COVERS Part No. CP726-P

 Open the catalog to page 3

FIXTURE CHANGING SYSTEM FLEX QUICK ZERO LOCATORS SETTING DEVICE QUICK ZERO SETTING DEVICE BASE (QUICK ZERO SETTING DEVICE) HOLDER (QUICK ZERO SETTING DEVICE) PLATE (QUICK ZERO SETTING DEVICE) Part No. QZSD-C6-P

 Open the catalog to page 4

FIXTURE CHANGING SYSTEM FLEX QUICK ZERO LOCATORS SETTING DEVICE

 Open the catalog to page 5

FIXTURE CHANGING SYSTEM FLEX QUICK ZERO LOCATORS SETTING DEVICE FLEX LOCATORS FLEX LOCATORS Flex Locators provide "precise locating" and "easy operation" by movable tapered pin or bushing. Hexagon Head FLEX LOCATORS Simple and low cost types with only locating function Standard Locating Repeatability 10μm Through Hole Locating Repeatability 10μm

 Open the catalog to page 6

Knob Handle Locating Repeatability Flange diameter 070 / 085 Locating Repeatability |3|U.m ~ Clamping Force |4kN,' 6.3kN imno corporator

 Open the catalog to page 7

FLEX LOCATORS QUICK ZERO SETTING DEVICEl FIXTURE CHANGING SYSTEM PNEUMATIC FLEX LOCATOR PINS (Tapered Type) (Straight Type) AMWF-W-S (Straight Type) ■How To Use PNEUMATIC FLEX LOCATORS ■How To Install PNEUMATIC FLEX LOCATORS imno corporator

 Open the catalog to page 8

flex locators fixture changing system Type Related Product I AMWF-BUIPNEUMATIC FLEX LOCATOR BUSHINGS *) At least 0.45 MPa is required for unclamping. The maximum operating air pressure is 1 MPa. AMWF-W-T (Tapered Type) |amwf-w-s| (Straight Type) Part Number Part Number ■When the air pressure is lowered by an air    ■ Precise dual contact provides excellent locating leakage, the wedge mechanism and the spring    repeatability at 3^m. prevent prompt lowering of the clamping force. Clamping Force at 0 Mpa Air Pressure (Clamping Force of Spring) ■AMWF40Type---1.2kN ■AMWF50Type---1.8kN ■ Can...

 Open the catalog to page 9

FLEX LOCATORS QUICK ZERO SETTING DEVICE FIXTURE CHANGING SYSTEM PNEUMATIC FLEX LOCATOR BUSHINGS Body SCM440 steel Quenched & tempered Black oxide finish Precision ground_ imno corporator

 Open the catalog to page 10

flex locators fixture changing system AMWF-BU-T (Tapered Type) Part Number |amwf-bu-d| (Diamond Type) Part Number |amwf-bu-S (Straight Type) Part Number ■ Function Locating with Tapered Type For setting reference position Locating with Diamond Type For locating reference at rotational direction The diagonal two surfaces are Related Product I AMWF-WlPNEUMATIC FLEX LOCATOR PINS ■How To Use PNEUMATIC FLEX LOCATORS ■How To Install PNEUMATIC FLEX LOCATORS imno corporator

 Open the catalog to page 11

FLEX LOCATORS QUICK ZERO SETTING DEVICEl FIXTURE CHANGING SYSTEM How To Install PNEUMATIC FLEX LOCATORS ■ Mounting Hole Dimensions for Bushings

 Open the catalog to page 12

FIXTURE CHANGING SYSTEM FLEX QUICK ZERO LOCATORS SETTING DEVICE How To Use PNEUMATIC FLEX LOCATORS Application Example For clamping at 2 points Straight Bushings Tapered Bushing Diamond Bushing Diamond Bushing Tapered Bushing Tapered Pins ■Positioning Order of Bushings Mount the Tapered Bushings and Diamond Bushings as in the figure below for locating fixture plates. Pay attention to the mounting direction of the Diamond Bushings, since the direction for use at 2 points and the direction for use at 4 points differ. For clamping at 2 points Tapered Bushing Locating Reference For Rotational...

 Open the catalog to page 13

FIXTURE CHANGING SYSTEM PNEUMATIC FLEX LOCATOR PINS AMWF-L-S (Port Style)    |AMWF-L-S-G (Direct Style) Part Number Part Number ■How To Install PNEUMATIC FLEX LOCATORS    I AMWF-BUPNEUMATIC FLEX LOCATOR BUSHINGS ■How To Use PNEUMATIC FLEX LOCATORS imno corporator

 Open the catalog to page 14

fixture changing system flex locators PNEUMATIC FLEX LOCATOR BUSHINGS Part Number Related Product Release air for clamping. The wedge goes down and pushes the balls to pull down the bushing. Can keep clamped without air supply. Locating Repeatability : ±10^m The bushing is centered and clamped when the 3 balls are pushed out to gain high locating repeatability. CAD Download : https://www.imao.biz/en ■How To Install PNEUMATIC FLEX LOCATORS ■How To Use PNEUMATIC FLEX LOCATORS I AMWF-L-FI PNEUMATIC FLEX LOCATOR PINS

 Open the catalog to page 15

FIXTURE CHANGING SYSTEM FLEX QUICK ZERO LOCATORS SETTING DEVICE How To Install PNEUMATIC FLEX LOCATORS ■Mounting Hole Dimensions ・Pins AMWF-L-S (Port Style) AMWF-L-S-G (Direct Style) Air Passage (Unclamping Port) Note to connect and fit the passage to the Part Number ■Spacing Tolerance AMWF-BU (Bushing) AMWF-L-S (Port Style) AMWF-L-S-G (Direct Style) 4-M2 Part Number

 Open the catalog to page 16

fixture changing system The pins should be mounted in the direction shown in the above figures. ■ How to Remove (Direct Style Pins) For easier removal, insert screws into the tapped holes and screw them. ■How to Remove (Bushings) For easier removal, insert screws into the tapped holes and screw them. Note Size ■ If the total load exceeds the maximum loading capacity, the locating repeatability may exceed ±10^m. ■ In vertical use, the locating repeatability may exceed ±10^m. ■ Pins and Bushings should be positioned equally against the center of the fixture plate. ■ For Port Style Pins, use...

 Open the catalog to page 17

FIXTURE CHANGING SYSTEM CP723 ONE-TOUCH FLEX LOCATOR CLAMPERS (Knob) imno Body / Shank Space saving operation Part Number Part Number *) The lifting force is the power of the inner spring of the body to push up the movable tapered bushing. ■ Mounting Hole Dimension 4-03.4 '    C0.5 ICP723-0632R-04l:Four pieces of hex. socket-head cap screws M3X0.5-8L lCP723-0840R-06l:Four pieces of hex. socket-head cap screws M3X0.5-10L How To Use ONE-TOUCH FLEX LOCATORS (Handle / Knob) imno corporator

 Open the catalog to page 18

All Imao Corporation catalogs and technical brochures

  1. SHR

    1 Pages

  2. HR-SP

    2 Pages

  3. SE-T

    1 Pages

  4. SE

    2 Pages

  5. HRE

    1 Pages

  6. HR-A,HR-B

    1 Pages

  7. HR / HRB

    2 Pages

  8. OTLK

    2 Pages

  9. BJ737-B

    1 Pages

  10. BJ736-C

    1 Pages

  11. BJ722

    1 Pages

  12. SRP,DRP

    1 Pages

  13. BUH

    2 Pages

  14. BJ733

    1 Pages

  15. QLSW-SH

    1 Pages

  16. QLSL

    2 Pages

  17. QLCA

    3 Pages

  18. CTK

    2 Pages

  19. OTLK-A

    1 Pages

  20. BJ724

    1 Pages

  21. BJ774-SUS

    2 Pages

  22. PED

    1 Pages

  23. BJ725

    1 Pages

  24. NKL

    1 Pages

  25. VISES

    13 Pages

  26. CP127

    2 Pages

  27. general catalog

    446 Pages

  28. WORK SUPPORTS

    24 Pages

  29. CLAMPS

    92 Pages

  30. ONE-TOUCH CLAMPS

    76 Pages

  31. PNEUMATIC CLAMPS

    36 Pages

  32. HANDLES & KNOBS

    22 Pages