CP127 - 2 Pages

Add to MyDirectIndustry favorites
CP127

Catalog excerpts

Part Number TAPERED SCREWS FOR INTERNAL FORM HOLDING irnno Body SCM435 steel Quenched and tempered Electroless nickel plated ■The tapered screw expands the jaws towards eight directions to hold different irregularly-shaped workpieces securely. ■0.15mm clamping stroke of each jaw section is perfect for clamping of lost-wax parts, die-cast parts, extruded parts, solid-drawn parts, prefinished parts, etc.

 Open the catalog to page 1

How To Use 1. Jaw Mounting ・ Insert an O-ring to the groove on top surface of the Form Holding Clamp. ・Set a Jaw putting its locating holes onto the round locating pins and fix it with a tapered screw. Note: At jaw installation, ensure the cam cylinder is fully loosened by turning counterclockwise until it stops. CP127 JAW O-ring (Furnished with jaw) Round Locating Pins Cam Cylinder 2. Jaw Machining 2-2. Machine the jaw to the contours of workpiece. Do not machine the jaws beyond the machinable depth. Machinable Depth   Loosen the cam cylinder fully and measure the 2-1.   dimension of the...

 Open the catalog to page 2

All Imao Corporation catalogs and technical brochures

  1. BJ737-B

    1 Pages

  2. BJ736-C

    1 Pages

  3. BJ722

    1 Pages

  4. SRP,DRP

    1 Pages

  5. BUH

    2 Pages

  6. BJ733

    1 Pages

  7. QLSW-SH

    1 Pages

  8. QLSL

    2 Pages

  9. QLCA

    3 Pages

  10. CTK

    2 Pages

  11. OTLK-A

    1 Pages

  12. BJ724

    1 Pages

  13. BJ774-SUS

    2 Pages

  14. PED

    1 Pages

  15. BJ725

    1 Pages

  16. NKL

    1 Pages

  17. VISES

    13 Pages

  18. general catalog

    446 Pages

  19. WORK SUPPORTS

    24 Pages

  20. CLAMPS

    92 Pages

  21. ONE-TOUCH CLAMPS

    76 Pages

  22. PNEUMATIC CLAMPS

    36 Pages

  23. HANDLES & KNOBS

    22 Pages