CLAMPING KNOBS
23Pages

CLAMPING KNOBS

ONE-TOUCH LOCKING KNOBS ★Key Point Secure locking of spindle with one-touch action! Housing Boss Base Insert Polyamide Polyamide Polyamide SUS304 (glass-fiber reinforced) (glass-fiber reinforced) (glass-fiber reinforced) stainless steel Black, Orange Blue Red Part Number Black Supplied With ・1 pc. of M5×15 Stainless-Steel Socket-Head Cap Screw ・1 pc. of M5×5 Stainless-Steel Cup-Point Socket-Head Setscrew with Locking Agent Technical Information ・OTLK enables one-touch locking and unlocking of spindle. ・Locking and unlocking of spindle can be perceived with click. ・Red and blue colors...

Click! Click! By pulling the housing until it clicks, the teeth of the knob disengage from the base. ■Mounting Spindle Dimension By pushing the housing until it clicks, the teeth engage again and lock the rotation of the spindle. ■How to Install 1. ull the housing and align the through hole on the base P and the tapped hole on the insert. 2. lign the flat and the tapped hole on the insert and then A mount to the spindle. 3. ix OTLK temporarily using M5×0.8-15L socket-head cap screw included. F 4. ix OTLK to the spindle temporarily using a setscrew included. F 5. ighten M5×0.8-15L...

TORQUE LIMITING KNOBS （Stud） Knob Polyamide （glass-fiber reinforced） S45C steel Black matte Electroless nickel plated Orange matte ★Key Point Tightening end is detectable by sound and touch of a click. Type *）Torque can vary ±15% (Max). **）Use these values only as a guide. Part Number Black Part Number Black

Feature ・ an be tightened with the specified torque. C ・ he spring and the balls inside provide a touch T of click when the knob reaches to the specified torque at the tightening end. ・ he knob can keep rotated to the desired T position after reaching to the specified torque. Click! Fastened! Technical Information Working temperature : Between 0℃ and 80 ℃ Prevent rotation or slippage. Prevent deformation or scratch. Clamping Elements Prevent deformation of workpiece. Related Product   TCL Adjustable-Torque Handles A Can be used with clamping

STAINLESS STEEL WING KNOBS H M Body Stainless steel (SCS13A) Electropolished Part Number

ALUMINUM HAND KNOBS Part Number Reamed Tapped Aluminum alloy（AC４B） Buffed finish Notes Dimensions are subject to slight variations due

CAST IRON HAND KNOBS Body Gray cast iron（FC200） Powder baked finish Black Bored Part Number Weight（g） Reamed Part Number Weight（g） Tapped Part Number Weight（g）

STAINLESS STEEL HAND KNOBS Type CK-R-SUS Stainless steel − CK-T-SUS （SCS１ ３A） Buffed finish Stainless steel CK-SUS （SUS303） CK-R-SUS (Reamed) Part Number CK-T-SUS (Tapped) Part Number

CK-SUS (Stud) Part Number ・Dimensions are subject to slight variations due to buffed finish.

Part Number ・Insert a bar between the prongs for maximum leverage and holding force. Body Ductile cast iron FCD450） （ Pow

LOBE KNOB CLAMP SCREWS Polypropylene plastic Steel (SUM２ ２L) Polyamide (6 nylon) plastic Black matte Black oxide finish Black Part Number Features: ・The plastic pad allows clamping a soft-material workpiece. Comes with a STK-N knob. ・The knob is glued to the screw. How To Use The plastic pad is not fitted to the screw when shipped. It can be fitted by pushing over

PLASTIC LOBE KNOBS Steel （SUM22） Black oxide finish Polyamide EK-N-SUS plastic Stainless steel Black EK-R-SUS （SUS303） EK-T-SUS Steel （SS400） Black oxide finish Steel Part Number Stainless Steel Insert Part Number Steel Part Number Stainless Steel Insert Part Number Steel Part Number Stainless Steel Insert Part Number

Part Number EK-R-SUS ・The reamed type    and     ）has a prepared hole on the side of the hub for machining of a （ EK-R fixing-pin hole. ・ EK-N has a prepared hole on the side of the hub. ・Use in hot or highly humid circumstances can deter

CAST IRON HAND KNOBS Part Number Body Gray cast iron FC200） （ Chrome pl

ALUMINUM HAND KNOBS Part Number Reamed Tapped Aluminum alloy（AC４B） Buffed finish Notes Dimensions are subject to slight variations due

STAINLESS STEEL HAND KNOBS (Tapped Through) Stainless steel （SCS１３A） Buffed finish (Tapped Blind) (Tapped Through) Type / Size HK-NR-SUS HK-NT-SUS HK-N-SUS Reamed H Part Number Tapped Blind Tapped Through Weight（g） Part Number H Weight（g） Part Number H Weight（g） ・ The reamed and tapped blind types are perfect for use on food processing mac

STAINLESS STEEL HAND KNOBS (Stud) Body Stud Stainless steel （SCS13 Stainless equivalent to SUS304）steel （SUS303） Electropolished Blank Part Number Stud Part Number

KNURLED THUMB KNOBS Steel(SS400) Chrome plated finish Steel（S45C） Chrome plated finish (Stud, Fully-Threaded) (Stud, Partly-Threaded) (Stud, Fully-Threaded) (Stud, Partly-Threaded) Steel Part Number Stainless Steel Part Number

TKS TKS-SUS (Stud, Fully-Threaded) Steel Part Number Stainless Steel Part Number TKS-R-SUS (Stud, Partly-Threaded（Stainless Steel)) Part Number Features: Perfect for use in fixing a panel board.

STAINLESS STEEL PULL KNOBS Part Number Body Stainless steel(SUS303) Electropolished

LKN-SUS / LKS-SUS STAINLESS STEEL GRIP KNOBS Type LKN-SUS LKN-T-SUS LKN-SUS (Tapped Through) (Tapped Blind) (Tapped Through) LKN-SUS (Tapped Blind) Part Number Part Number Ｓtainless steel （SUS３ ３） ０ Ｓtainless steel Ｓtainless steel LKS-SUS 5～10 ０ （SUS３ ３） （SUS３ ４） ０ LKS-SUS 3,4 (Tapped Blin

LKS-SUS (Stud) Part Number ・ Perfect for food processing machines, washing machines, etc. ・ Increased knob height allows for excellent grip.