Bearing Guide Rollers
35Pages

{{requestButtons}}

Catalog excerpts

Bearing Guide Rollers - 1

Bearing Guide Rollers

Open the catalog to page 1
Bearing Guide Rollers - 2

DEEP U GROOVE PLASTIC GUIDE ROLLERS FLAT PLASTIC GUIDE ROLLERS ROUND PLASTIC GUIDE ROLLERS U GROOVE PLASTIC GUIDE ROLLERS SINGLE-FLANGED PLASTIC GUIDE ROLLERS DOUBLE-FLANGED GUIDE ROLLERS DOUBLE-FLANGED GUIDE ROLLERS (DOUBLE BEARINGS) U GROOVE GUIDE ROLLERS U GROOVE GUIDE ROLLERS (DOUBLE BEARINGS) V GROOVE GUIDE ROLLERS V GROOVE GUIDE ROLLERS (DOUBLE BEARINGS) Y GROOVE GUIDE ROLLERS

Open the catalog to page 2
Bearing Guide Rollers - 3

Y GROOVE GUIDE ROLLERS (DOUBLE BEARINGS) GUIDE ROLLERS (Light-Duty) FLAT GUIDE ROLLERS CROWN GUIDE ROLLERS SINGLE-FLANGED GUIDE ROLLERS SINGLE-FLANGED GUIDE ROLLERS (DOUBLE BEARINGS) Y GROOVE GUIDE ROLLERS (DOUBLEROW ANGULAR CONTACT BALL BEARING) ROLLER SCREWS ROLLER PINS ECCENTRIC ROLLER PINS FLANGED ROLLER PINS ROLLER PINS

Open the catalog to page 3
Bearing Guide Rollers - 4

ECCENTRIC ROLLER PINS ROLLER PINS GUIDE ROLLER BRACKETS RAILS FOR GUIDE ROLLERS Part No. RLR

Open the catalog to page 4
Bearing Guide Rollers - 5

DEEP U GROOVE PLASTIC GUIDE ROLLERS Stainless Steel WAcross 2 Flats of Hex Hole C-type Retaining Ring C-type Retaining Ring GRL-P-D-SUS Without Stud With Stud Type GRL-P-D-SUS GRL-M-P-D-SUS GRL-P-D-SUS Retaining Ring Polyacetal plastic White Without Stud Part Number Bearing Type Allowable Load Weight N g With Stud Part Number Feature ・The plastic body provides silent running. ・Deep groove holds the wire securely and allows using with pulleys. Note ・Roller pin for “Without Stud” type should be prepared by the customer. ・Do not use in applications where impact load or axial load is applied....

Open the catalog to page 5
Bearing Guide Rollers - 6

FLAT PLASTIC GUIDE ROLLERS Stainless Steel WAcross 2 Flats of Hex Hole Without Stud With Stud Type GRL-P-F-SUS GRL-M-P-F-SUS GRL-P-F-SUS Polyacetal plastic White ー SUS440C stainless steel SUS303 stainless steel Without Stud Part Number Bearing Type Allowable Load Weight N g

Open the catalog to page 6
Bearing Guide Rollers - 7

With Stud Part Number Bearing Type Allowable Load Weight N g Feature The plastic body provides silent running. Notes ・Roller pin for “Without Stud” type should be prepared by the customer. ・Do not use in applications where impact load or axial load is applied. ・“Allowable Load” mentioned above means allowable radial load based on the test of rotating the roller a million times at the speed of 300min−1. Consider the above load values as reference since load capacity varies with use conditions or environments. Technical Information Heatresistant Temperature 105℃

Open the catalog to page 7
Bearing Guide Rollers - 8

ROUND PLASTIC GUIDE ROLLERS Stainless Steel WAcross 2 Flats of Hex Hole Without Stud With Stud Type Polyacetal plastic GRL-M-P-U-SUS White GRL-P-U-SUS ー SUS440C stainless steel SUS303 stainless steel Without Stud Part Number Bearing Type Allowable Load Weight N g

Open the catalog to page 8
Bearing Guide Rollers - 9

With Stud Part Number Bearing Type Allowable Load Weight N g Feature The plastic body provides silent running. Notes ・Roller pin for “Without Stud” type should be prepared by the customer. ・Do not use in applications where impact load or axial load is applied. ・“Allowable Load” mentioned above means allowable radial load based on the test of rotating the roller a million times at the speed of 300min−1. Consider the above load values as reference since load capacity varies with use conditions or environments. Technical Information Heatresistant Tem

Open the catalog to page 9
Bearing Guide Rollers - 10

U GROOVE PLASTIC GUIDE ROLLERS Stainless Steel WAcross 2 Flats of Hex Hole Without Stud With Stud Type Polyacetal plastic GRL-M-P-R-SUS White GRL-P-R-SUS ー SUS440C stainless steel SUS303 stainless steel Without Stud Part Number Bearing Type Allowable LoadN With Stud Part Number Bearing Allowable Weight Type LoadN g Feature The plastic body provides silent running. Notes ・Roller pin for “Without Stud” type should be prepared by the customer. ・Do not use in applications where impact load or axial load is applied. ・“Allowable Load” mentioned above means allowable radial load based on the test...

Open the catalog to page 10
Bearing Guide Rollers - 11

SINGLE-FLANGED PLASTIC GUIDE ROLLERS 6 3 (Across 2 Flats of 1.5 Hex Hole) Part Number Bearing Allowable Load Weight g N Type Feature The plastic body provides silent running. Technical Information Heatresistant Temperature 105℃ GRL2206P-L-SUS Polyacetal plastic SUS440C stainless steel SUS303 stainless steel GRL22M6P-L-SUS White Notes ・Roller pin for GRL2206P-L-SUS should be prepared by the customer. ・Do not use in applications where impact load or axial load is applied. ・“Allowable Load” mentioned above means allowable radial load based on the test of rotating the roller a million times at...

Open the catalog to page 11
Bearing Guide Rollers - 12

DOUBLE-FLANGED GUIDE ROLLERS L C-type Retaining Ring Stainless Steel (Hardened Steel) A B A Type Retaining Ring Polyacetal plastic Black Stainless steel (SUS303) Stainless steel (SUS440C) Stainless steel (SUS304) Bearing Type (Stainless Steel) SCM435 Steel Black oxide finished Heat treated to Rc40-45 S45C steel Electroless nickel plated Steel Part Number Weightg Hardened Steel Part Number Weightg Features ・ Use as rollers for sliding doors or carriers. ・ Medium-duty ・ This product can accept a polished square steel bar that is available commercially. ・ Hardened-steel guide rollers are...

Open the catalog to page 12
Bearing Guide Rollers - 13

DOUBLE-FLANGED GUIDE ROLLERS (DOUBLE BEARINGS) L C-type Retaining Ring Body S45C steel Electroless nickel plated Part Number ・ Use as rollers for sliding doors or carriers. ・ Heavy-duty ・This product can accept a polished square steel bar that is available commercially. Weight Applicable Roller Screws g Bearing Type Bearing/Retaining Ring Technical Information Load Rating of Bearings Bearing Type Basic Load Rating Basic Static Load Rating CrN CorN

Open the catalog to page 13
Bearing Guide Rollers - 14

U GROOVE GUIDE ROLLERS ° (Hardened Steel) A B A Type (Stainless Steel) Steel Part Number Weightg SCM435 Steel Black oxide finished Steel Heat treated to Rc40-45 Polyacetal plastic Black Hardened Steel Part Number Weightg Features ・ Use as rollers for sliding doors or carriers. ・ Medium-duty ・Use RLR Rails For Guide Rollers for this product (to be ordered separately). ・ Hardened-steel guide rollers are wear-resistant and prevent damage from intrusion of foreign matter such as chips. Retaining Ring S45C steel Electroless nickel plated C-type Retaining Ring Bearing Type Stainless steel...

Open the catalog to page 14

All Imao Corporation catalogs and technical brochures

  1. QLCL

    2 Pages

  2. Side Clamps

    27 Pages

  3. Flex Locators

    38 Pages

  4. WORK SUPPORTS

    24 Pages

  5. TENSIONERS

    40 Pages

  6. CLAMPS

    106 Pages

  7. Spring Clamps

    22 Pages

  8. SCREWS & NUTS

    13 Pages

  9. CLAMPING KNOBS

    23 Pages

  10. LOCATING PARTS

    14 Pages

  11. GRIPPERS

    19 Pages