5.Axis ClampingSystem Tofque.lOOM'tn Clamping Force.20kN

CENTERING CLAMPS FLEX ZERO BASES CLAMPING PINS PROTECTING COVER

CENTERING CLAMP Perfect Workholding for 5-axis Machining! Clamping unit for machining full sides of the workpiece Ideal for 5-axis machining center or rotary table! CENTERING CLAMP Mechanical Self Centering Vise Two Types of Jaws Serrated Jaw The jaw has serrated edges on both sides. The centering movement of the jaws ensures to keep the workpiece center in the same place, even if the size of the workpiece varies. Ideal for clamping raw workpieces on 5-axis machining centers. 20 kN Clamping Force Rigid design enables strong 20kN clamping force. The jaws clamp powerfully with a gripping height...

CENTERING CLAMPS Section B-B (4 places)

Manual compact self-centering vise. Recommended machining allowance is 0.4mm or more per side of the workpiece. How To Use■ How to Mount Jaws ■Mount Jaws to the jaw bases of CP170-N. ■Use included locating screws to fix Jaws. *) Jaws are not supplied with CP170-N. ■Both jaws move inward to the center by turning the spindle clockwise. ■Both jaws move outward from the center by turning the spindle counterclockwise. With CP175-08001RS Serrated Jaws Stroke Si With CP175-08001D Dovetail Jaws Stroke S2 Part Number *) The maximum rotation diameter is the dimension D in the chart on previous page. Continuing...

Fixture Plate Clamping Pins CP185 Locating Pins Flex Zero Bases CP180 Tapped Taper-nose Straps BJ153 ■Usage Example of Error-proofing Hole Prepare a screw etc. on M5x0.8 Depth 12 hole on CP180 Flex Zero Base to prevent mounting CP170-N Centering Clamp in wrong direction. Error-proofing Hole φ10 Depth 6 Error-proofing Hole M5 Screw etc. Error-proofing Hole Flex Zero Base CP180 Supplied With 4 of Locating Screw for jaw mounting. Related Product ・ CP175 JAWS ・ CP180 FLEX ZERO BASES ・ CP185 C

Body SCM440 steel Quenched & tempered Black oxide finished Serrated Dovetail How To Use Use as jaws of CP170-N Centering Clamps. Part Number *)To produce Jaws at customers, prepare φ10F8 mounting holes with 29±0.02 pitch. The serrated tips bite into workpiece and clamp powerfully. Workpiece **) Dovetail jaw holds workpiece at two surfaces and provides positive clamping. Workpiece ***) **) Workpiece hardness should be HRC38 or less for use of serrated jaw. Technical Information 4.5 ***) Preparation of dovetail groove on workpieces is required. Usable as edge clamping jaws without dovetail preparation....

Value Creator

FLEX ZERO BASES FLEX ZERO BASES Powerfully clamp both workpiece or fixture. Pull clamp mechanism maximizes machining area. 5 axis machining with No Tool

FLEX ZERO BASES ★ Key Point -Clamp the fixture by single operation! Body CAD Download : https://www.imao.com/en/ imnocoRPORRTion

Part Number Clamping Force（kN） Allowable Tightening Torque（N・m） ・ Can be clamped by one operation. ・ Pins are fully clamped by approx. 3 rotations of the clamping socket. ■How To Locate Can be positioned by reference holes or finished side surfaces. Use threaded pin or screw to prevent mounting fixtures or workpieces in wrong direction. Enlarged View:A Continuing on Next Page CAD Download :

Prepare a screw etc. on M5x0.8 Depth 12 hole on I CP180 I Flex Zero Base to prevent mounting I CP170-NI Centering Clamp in wrong direction. Supplied With CP180-1515-35I : 6 of hole cover caps CP180-2424-35I : 4 of small hole cover caps 6 of large hole cover caps

CLAMPING PINS Part Number Part Number Related Product Can be used in combination with I CP170-N CENTERING CLAMPS. imflo corporator

Electroless Nickel Plated Part Number Mount on the unused grid of FLEX ZERO BASE by hex. key as a protective cover. CAD Download : https://www.imao.com/en/ imnocoRPORflTion

www.imao.com/en 2002 Senbiki, Seki, Gifu 501-3954, Japan Tel : +81 575 28 5823