5-Axis Clamping Systems
15Pages

{{requestButtons}}

Catalog excerpts

5-Axis Clamping Systems - 2

CENTERING CLAMPS FLEX ZERO BASES CLAMPING PINS PROTECTING COVER

Open the catalog to page 2
5-Axis Clamping Systems - 3

CENTERING CLAMP Perfect Workholding for 5-axis Machining! Clamping unit for machining full sides of the workpiece Ideal for 5-axis machining center or rotary table! CENTERING CLAMP Serrated Jaw The jaw has serrated edges on both sides.

Open the catalog to page 3
5-Axis Clamping Systems - 4

CENTERING CLAMPS Body SCM440 steel Induction hardened Black oxide finished Precision ground Jaws Bases SCM440 steel Black oxide finished Part Number Allowable Tightening Torque (Nm) Proper Jaws Part Number Serrated Jaws Part Number Dovetail Jaws Clamping Force(kN) Part Number Clamping Force(kN)

Open the catalog to page 4
5-Axis Clamping Systems - 5

Feature Manual compact self-centering vise. Recommended machining allowance is 0.4mm or more per side of the workpiece. Locating Screws (included) ■How to Mount Jaws ・Mount Jaws to the jaw bases of CP170-N. ・Use included locating screws to fix Jaws. CP175 Jaws *) *) Jaws are not supplied with CP170-N. ・Both jaws move inward to the center by turning the spindle clockwise. ・Both jaws move outward from the center by turning the spindle counterclockwise. ■Stroke With CP175-08001RS Serrated Jaws Stroke S1 With Reversely (Inside-out) Mounted CP175-08001RS Serrated Jaws Stroke S3 With CP175-08001D...

Open the catalog to page 5
5-Axis Clamping Systems - 6

■Usage Example of Error-proofing Hole Prepare a screw etc. on M5x0.8 Depth 12 hole on CP180 Flex Zero Base to prevent mounting CP170-N Centering Clamp in wrong direction. Error-proofing Hole φ10 Depth 6 Error-proofing Hole Error-proofing Hole Flex Zero Base CP180 Supplied With 4 of Locating Screw for jaw mounting. Related Product ・ CP175 JAWS ・ CP180 FLEX ZERO BASES ・ CP185 CLA

Open the catalog to page 6
5-Axis Clamping Systems - 7

Body SCM440 steel Quenched & tempered Black oxide finished Serrated Dovetail Part Number How To Use Use as jaws of CP170-N Centering Clamps. *)To produce Jaws at customers, prepare φ10F8 mounting holes with 29±0.02 pitch. The serrated tips bite into workpiece and clamp powerfully. Workpiece **) Dovetail jaw holds workpiece at two surfaces and provides positive clamping. Workpiece ***) **) Workpiece hardness should be HRC38 or less for use of serrated jaw. Technical Information 4.5 ***) Preparation of dovetail groove on workpieces is required. Usable as edge clamping jaws without dovetail...

Open the catalog to page 7
5-Axis Clamping Systems - 9

FLEX ZERO BASES Clamping Force FLEX ZERO BASES Powerfully clamp both workpiece or fixture. Pull clamp mechanism maximizes machining area. 5 axis machining with No Tool Interference!

Open the catalog to page 9
5-Axis Clamping Systems - 10

FLEX ZERO BASES Clamp the fixture by single operation! Clamping Socket SCM440 steel Black oxide finished S45C steel Black oxide finished 4-M12 For Socket-Head Cap Screws 4-M16 For Socket-Head Cap Screws Threaded Spindle Body S50C steel Nitrocarburized HV 400 Effective depth 0.1mm NAK55 Steel HRC37-43 Part Number ★Key Point

Open the catalog to page 10
5-Axis Clamping Systems - 11

Part Number Clamping Force(kN) Allowable Tightening Torque(N・m) ・ Can be clamped by one operation. ・ Pins are fully clamped by approx. 3 rotations of the clamping socket. ■How To Locate Can be positioned by reference holes or finished side surfaces. Use threaded pin or screw to prevent mounting fixtures or workpieces in wrong direction. Enlarged View:A Continuing on Next Page CAD Download :

Open the catalog to page 11
5-Axis Clamping Systems - 12

■Usage Example of Error-proofing Hole Prepare a screw etc. on M5x0.8 Depth 12 hole on CP180 Flex Zero Base to prevent mounting CP170-N Centering Clamp in wrong direction. Error-proofing Hole (φ10 Depth 6) Error-proofing Hole Error-proofing Hole Technical Information Repeatability: 5μm Related Product ・ CP185 CLAMPING PINS ・ CP185-P PROTECTING COVER ・ CP170-N CENTERING

Open the catalog to page 12
5-Axis Clamping Systems - 13

CLAMPING PINS Part Number Body SCM440 steel Nitrocarburized CP185-08001 M 8×1.25 CP185-10001 M10×1.5 Note Use 4 pins as a set for mounting. ■Mounting Hole Dimension ■Spacing Torelance Allowable tolerance of the mounting holes should be ±0.02. Allowable Tolerance±0.02 Part Number Related Product Can be used in combination with CP170-N CENTERING CLAMPS.(P. 2038 参照)

Open the catalog to page 13
5-Axis Clamping Systems - 14

PROTECTING COVER Body S45C steel Electroless Nickel Plated Part Number Mount on the unused grid of FLEX ZERO BASE by hex. key as a protective cover. FLEX ZERO BASE CP180 FLEX ZERO BASE C

Open the catalog to page 14
5-Axis Clamping Systems - 15

www.imao.com/en 2002 Senbiki, Seki, Gifu 501-3954, Japan Tel : +81 575 28 5823

Open the catalog to page 15

All Imao Corporation catalogs and technical brochures

  1. QLCL

    2 Pages

  2. Side Clamps

    27 Pages

  3. Flex Locators

    38 Pages

  4. WORK SUPPORTS

    24 Pages

  5. TENSIONERS

    40 Pages

  6. CLAMPS

    106 Pages

  7. Spring Clamps

    22 Pages

  8. SCREWS & NUTS

    13 Pages

  9. CLAMPING KNOBS

    23 Pages

  10. LOCATING PARTS

    14 Pages

  11. GRIPPERS

    19 Pages