AR0134: 1/3-Inch 1.2 Mp CMOS Digital Image Sensor Features For the latest datasheet revision, please visit www.onsemi.com Features • ON Semiconductor's 3rd Generation Global Shutter Technology • Superior low-light performance • HD video (720p60) • Video/Single Frame mode • Flexible row-skip modes • On-chip AE and statistics engine • Parallel and serial output • Support for external LED or flash • Auto black level calibration • Context switching Applications • Scene processing • Scanning and machine vision • 720p60 video applications General Description ON Semiconductor's AR0134 is a 1/3-inch 1.2 Mp CMOS digital image sensor with an active-pixel array of 1280H x 960V It is designed for low light performance and features a global shutter for accurate capture of moving scenes. It includes sophisticated camera functions such as auto exposure control, windowing, scaling, row skip mode, and both video and single frame modes. It is programmable through a simple two-wire serial interface. The AR0134 produces extraordinarily clear, sharp digital pictures, and its ability to capture both continuous video and single frames makes it the perfect choice for a wide range of applications, including scanning and industrial inspection. Table 1: Key Parameters

AR0134: 1/3-Inch 1.2 Mp CMOS Digital Image Sensor Ordering Information See the ON Semiconductor Device Nomenclature document (TND310/D) for a full description of the naming convention used for image sensors. For reference documentation, including information on evaluation kits, please visit our web site at www.onsemi.com.

AR0134: 1/3-Inch 1.2 Mp CMOS Digital Image Sensor Table of Contents Table of Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

AR0134: 1/3-Inch 1.2 Mp CMOS Digital Image Sensor List of Figures List of Figures Figure 1: Figure 2: Figure 3: Figure 4: Figure 5: Figure 6: Figure 7: Figure 8: Figure 9: Figure 10: Figure 11: Figure 12: Figure 13: Figure 14: Figure 15: Figure 16: Figure 17: Figure 18: Figure 19: Figure 20: Figure 21: Figure 22: Figure 23: Figure 24: Figure 25: Figure 26: Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Pixel Array Description . . . . . . . . . . . . . . . . . . . . . . . . ....

AR0134: 1/3-Inch 1.2 Mp CMOS Digital Image Sensor List of Tables List of Tables Table 1: Table 2: Table 3: Table 4: Table 5: Table 6: Table 7: Table 8: Table 9: Table 10: Table 11: Table 12: Table 13: Table 14: Table 15: Table 16: Table 17: Table 18: Table 19: Table 20: Key Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Available Part Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Pin...

AR0134: 1/3-Inch 1.2 Mp CMOS Digital Image Sensor General Description General Description The ON Semiconductor AR0134 can be operated in its default mode or programmed for frame size, exposure, gain, and other parameters. The default mode output is a full-resolution image at 54 frames per second (fps). It outputs 12-bit raw data, using either the parallel or serial (HiSPi) output ports. The device may be operated in video (master) mode or in frame trigger mode. FRAME_VALID and LINE_VALID signals are output on dedicated pins, along with a synchronized pixel clock. A dedicated FLASH pin can be...

Features Overview AR0134: 1/3-Inch 1.2 Mp CMOS Digital Image Sensor Features Overview processing signal chain (which provides further data path corrections and applies digital gain). The pixel data are output at a rate of up to 74.25 Mp/s, in parallel to frame and line synchronization signals. The AR0134 Global Sensor shutter has a wide array of features to enhance functionality and to increase versatility. A summary of features follows. Please refer to the AR0134 Developer Guide for detailed feature descriptions, register settings, and tuning guidelines and recommendations. • Operating Modes The...

AR0134: 1/3-Inch 1.2 Mp CMOS Digital Image Sensor Pixel Data Format Pixel Data Format Pixel Array Structure The AR0134 pixel array is configured as 1412 columns by 1028 rows, (see Figure 2). The dark pixels are optically black and are used internally to monitor black level. Of the right 108 columns, 64 are dark pixels used for row noise correction. Of the top 24 rows of pixels, 12 of the dark rows are used for black level correction. There are 1296 columns by 976 rows of optically active pixels. While the sensor's format is 1280 x 960, the additional active columns and active rows are included...

AR0134: 1/3-Inch 1.2 Mp CMOS Digital Image Sensor Pixel Data FormatFigure 3: Pixel Color Pattern Detail (Top Right Corner) Column Readout Direction ^Active Pixel (0,0) Array Pixel (110, 40) By convention, the sensor core pixel array is shown with the first addressable (logical) pixel (0,0) in the top right corner (see Figure 3). This reflects the actual layout of the array on the die. Also, the physical location of the first pixel data read out of the sensor in default condition is that of pixel (112, 44).

AR0134: 1/3-Inch 1.2 Mp CMOS Digital Image Sensor Configuration and Pinout Configuration and Pinout The figures and tables below show a typical configuration for the AR0134 image sensor and show the package pinouts. Typical Configuration: Serial Four-Lane HiSPi Interface Digital Digital I/O Core power1 power1 SDATA SCLK OE_BAR STANDBY RESET_BAR From controller TEST FLASH DGND Digital ground Analog ground 1. All power supplies must be adequately decoupled. 2. ON Semiconductor recommends a resistor value of 1.5k, but it may be greater for slower two-wire speed. 3. This pull-up resistor is not...