SL-Sys LIQUID

SL-Sys LIQUID

SL-Sys LIQUID

Product catalog summary
Overview: The document outlines the features and capabilities of the SL-Sys, a comprehensive solution for testing liquid lenses to ensure quality and optimize production lines. It emphasizes the system's ability to measure optical power, hysteresis, and other critical parameters independently and accurately.
Specifications:
  • Measurement Modes: Static (wavefront error, power, hysteresis) and Dynamic (temporal behavior).
  • Optical Power Range: -20 to +40 D with accuracy of 0.1 D for power < 20 D and 0.2 D for power > 20 D.
  • Wavefront Accuracy: Better than 0.03 λrms.
  • Wavelength: 630 nm.
  • Temporal Resolution: 1 ms for dynamic measurement.
  • Command Voltage Range: ± 150 V, Max frequency 500kHz.
  • Voltage Accuracy: < ± 80 mV @ 40 V; < ± 105 mV @ 100 V.
  • Current Accuracy: 10 µA.
  • Size: 1038 x 270 x 231 mm3.
Procedures:
  • Measure optical power and hysteresis independently based on applied voltage.
  • Assess optical quality, prism, and centering errors compared to optical power.
  • Determine temporal transient response dynamics, including optical power and aberration evolution.
  • Gauge applied voltage at the lens' outer edge, overall consumed current, and the ratio of applied versus consumed voltage.
Features:
  • Fully-calibrated, solid-state optical bench for perfect optical conjugation.
  • Ergonomic PC software interface for fast, simple, and reliable quality control.
  • Collimated light source at 630nm, AC generator with ±10V power, 20x charge amplifier, and synchronized wavefront sensor.
  • Security feature that cuts electric current when the access panel is opened.
Customization and Configuration:
  • 100% customizable measurement with an intuitive configuration interface.
  • Define measurement diameter for all or part of the lens.
  • Enter precise command voltage values to determine optical power/voltage ratio and hysteresis.
  • Select temporal resolution and analysis range, with acceptable values for aberration RMS, hysteresis, optical power limits, lens-induced tilt, and centering error.
Contact Information:
  • Imagine Optic SA, France: +33 (0)1 64 86 15 60
  • Imagine Optic, Inc., North America: 1-617-401-2198
  • COSINGO, Spain: +34 935 534 148
See more

Catalog excerpts

SL-Sys LIQUID-1

The complte solution for liquid lens testing to ensure quality and optimize production lines. Measure optical power and hysteresis of the power curve independently depending on applied voltage 蕕 Assess the optical quality, prism and centering errors individually compared to optical power Determine temporal transient response dynamic including optical power and aberration evolution while applying voltage Օ Gage applied voltage at the lens' outer edge, overall consumed current and the ratio of applied versus consumed voltage Imagine Optic SA (main office) 18 rue Charles de Gaulle 91400 Orsay France Telephone: +33 (0)1 64 86 15 60 Fax: +33 (0)1 64 86 15 61 E-mail: [email protected] Imagine Optic, Inc. (North America) %A Cambridge Innovation Center ^ One Broadway, 14th floor Cambridge, MA 02142, USA jST Telephone: 1-617-401-2198 Fax: 1-617-930-9818 W 2415 Third Street San Francisco, CA 94107 J_ Telephone: 1-415-525-5557 Fax: 1-415-525-5558 I E-mail: [email protected] ^ COSINGO (Imagine Optic Spain SL) W m Mediterranean Technology Park Av. del Canal Olimpic s/n 08860 Castelldefels (Barcelona) Spain Telephone: +34 935 534 148 Fax: +34 935 534 000 E-mail: [email protected] © 2010 Imagine Optic SA. All rights reserved. Imagine Optic, the products, the companies and the services mentioned in this media are trademarks and/or registered trademarks of Imagine Optic and/or their respective owners. Communications by Elucido Partners www.elucido-partners.net

 Open the catalog to page 1
SL-Sys LIQUID-2

Welcome to the future of liquid lens testing. The SL-Sys is a turnkey solution that provides industrial liquid lens manufacturers with an unparalleled quality control platform. It enables you to go beyond current testing methods that rely solely on focal length and MTF measurements by ensuring the overall lens quality as a function of true optical quality, directly on the production line. Inside the system's sleek outer casing is a technology treasure chest that in-cludes a fully-calibrated, solid-statel optical bench that ensures perfect optical conjugation between the lens and the testing plane....

 Open the catalog to page 2

All Imagine Optic catalogs and technical brochures

  1. WAVE Suite

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.